can't find serial on hp msl g3(tsm 6.3 with hp msl g3)

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

can't find serial on hp msl g3(tsm 6.3 with hp msl g3)

redliquid
my config :
mhvtl:
Library: 100 CHANNEL: 14 TARGET: 02 LUN: 00
 Vendor identification: HP
 Product identification: MSL G3 Series
 Product revision level: 7.80
 Unit serial number: 31001030
 NAA: 28:11:22:33:ab:1:00:00
 Home directory: /opt/mhvtl/100
 Backoff: 400

Drive: 101 CHANNEL: 14 TARGET: 02 LUN: 01
 Library ID: 100 Slot: 01
 Vendor identification: HP
 Product identification: Ultrium 5-SCSI
 Product revision level: Y34W
 Unit serial number: HU1008GA29
 NAA: 28:11:22:33:ab:1:00:01
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 102 CHANNEL: 14 TARGET: 02 LUN: 2
 Library ID: 100 Slot: 2
 Vendor identification: HP
 Product identification: Ultrium 5-SCSI
 Product revision level: Y5BW
 Unit serial number: HU1007H7R6
 NAA: 28:11:22:33:ab:1:00:2
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 103 CHANNEL: 14 TARGET: 02 LUN: 03
 Library ID: 100 Slot: 03
 Vendor identification: HP
 Product identification: Ultrium 5-SCSI
 Product revision level: Y34W
 Unit serial number: HU1008GA30
 NAA: 28:11:22:33:ab:1:00:03
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 104 CHANNEL: 14 TARGET: 02 LUN: 4
 Library ID: 100 Slot: 04
 Vendor identification: HP
 Product identification: Ultrium 5-SCSI
 Product revision level: Y5BW
 Unit serial number: HU1007H7R8
 NAA: 28:11:22:33:ab:1:00:4
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

[4:14:2:0]   mediumx HP       MSL G3 Series    7.80  /dev/sch16  /dev/sg100
[4:14:2:1]   tape    HP       Ultrium 5-SCSI   Y34W  /dev/st74  /dev/sg80
[4:14:2:2]   tape    HP       Ultrium 5-SCSI   Y5BW  /dev/st75  /dev/sg81
[4:14:2:3]   tape    HP       Ultrium 5-SCSI   Y34W  /dev/st76  /dev/sg82
[4:14:2:4]   tape    HP       Ultrium 5-SCSI   Y5BW  /dev/st77  /dev/sg83

tgtadm --lld iscsi --mode target --op new --tid=1 -T mslg3
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 --bstype=sg --device-type=pt -b /dev/sg100
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 2 --bstype=sg --device-type=pt -b /dev/sg80  
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 3 --bstype=sg --device-type=pt -b /dev/sg81  
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 4 --bstype=sg --device-type=pt -b /dev/sg82  
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 5 --bstype=sg --device-type=pt -b /dev/sg83    
tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL


TSM:
# pwd
/opt/tivoli/tsm/devices/bin
# ./autoconf -a
******************************************
*       IBM TIVOLI STORAGE MANAGER       *
*   Autoconf Utility Program for Linux   *
******************************************
Licensed Materials - Property of IBM

(C) Copyright IBM Corporation 2009. All rights reserved.
U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corporation.

Added the read and write permissions for all users to /dev/sg4.
Added the read and write permissions for all users to /dev/sg5.
Added the read and write permissions for all users to /dev/sg6.
Added the read and write permissions for all users to /dev/sg7.
Added the read and write permissions for all users to /dev/sg8.

Tivoli Tape Drives:
===================
Index Minor Host CHN ID  LUN Type Vendor_ID Device_Serial_Number       Product_ID       Rev.
000   005   006  000 000 002 001  HP        HU1008GA29           Ultrium 5-SCSI   Y34W
001   006   006  000 000 003 001  HP        HU1007H7R6           Ultrium 5-SCSI   Y5BW
002   007   006  000 000 004 001  HP        HU1008GA30           Ultrium 5-SCSI   Y34W
003   008   006  000 000 005 001  HP        HU1007H7R8           Ultrium 5-SCSI   Y5BW


Tivoli Medium Changer Devices:
==============================
Index Minor Host CHN ID  LUN Type Vendor_ID Device_Serial_Number       Product_ID       Rev.
000   004   006  000 000 001 008  HP       € MSL G3 Series    7.80

# lsscsi -g
[0:0:0:0]    cd/dvd  NECVMWar VMware IDE CDR00 1.00  /dev/sr0   /dev/sg0
[1:0:0:0]    cd/dvd  NECVMWar VMware IDE CDR10 1.00  /dev/sr1   /dev/sg1
[2:0:0:0]    disk    VMware,  VMware Virtual S 1.0   /dev/sda   /dev/sg2
[6:0:0:0]    storage IET      Controller       0001  -         /dev/sg3
[6:0:0:1]    mediumx HP       MSL G3 Series    7.80  /dev/sch0  /dev/sg4
[6:0:0:2]    tape    HP       Ultrium 5-SCSI   Y34W  -          /dev/sg5
[6:0:0:3]    tape    HP       Ultrium 5-SCSI   Y5BW  -          /dev/sg6
[6:0:0:4]    tape    HP       Ultrium 5-SCSI   Y34W  -          /dev/sg7
[6:0:0:5]    tape    HP       Ultrium 5-SCSI   Y5BW  -          /dev/sg8

TSM Define:
set servername tsmserver
define library hp-msl libtype=scsi shared=yes
define path tsmserver hp-msl srctype=server desttype=library device=/dev/tsmscsi/lb0
DEFINE DRIVE hp-msl dr1 ELEMENT=autod serial=autod ONLINE=Yes
DEFINE DRIVE hp-msl dr2 ELEMENT=autod serial=autod ONLINE=Yes
DEFINE DRIVE hp-msl dr3 ELEMENT=autod serial=autod ONLINE=Yes
DEFINE DRIVE hp-msl dr4 ELEMENT=autod serial=autod ONLINE=Yes
define path tsmserver dr1 srctype=server desttype=drive library=hp-msl device=/dev/tsmscsi/mt0
define path tsmserver dr2 srctype=server desttype=drive library=hp-msl device=/dev/tsmscsi/mt1
define path tsmserver dr3 srctype=server desttype=drive library=hp-msl device=/dev/tsmscsi/mt2
define path tsmserver dr4 srctype=server desttype=drive library=hp-msl device=/dev/tsmscsi/mt3
DEFINE DEVCLASS hp-msl DEVT=LTO FORMAT=DRIVE MOUNTL=DRIVES MOUNTWAIT=60 MOUNTRETENTION=60 PREFIX=ADSM LIBRARY=hp-msl WORM=NO
label libvolume hp-msl search=yes labelsource=barcode checkin=scratch
set dbrecover hp-msl

TSM library infor:
tsm: TSMSERVER>q libr f=d

                  Library Name: HP-MSL
                  Library Type: SCSI
                        ACS Id:
              Private Category:
              Scratch Category:
         WORM Scratch Category:
              External Manager:
                        Shared: Yes
                       LanFree:
            ObeyMountRetention:
       Primary Library Manager:
                           WWN: 50112233AB010000
                 Serial Number:€
                     AutoLabel: No
                  Reset Drives: Yes
               Relabel Scratch: No
                      ZosMedia:
Last Update by (administrator): ADMIN
         Last Update Date/Time: 05/05/2014 11:38:54

my question:
1.why serial of library is " Serial Number:€"
2.i think that my library wwn is  NAA: 28:11:22:33:ab:1:00:00, but why is WWN: 50112233AB010000
   i have a library that it's wwn is 50112233AB010000
Library: 50 CHANNEL: 1 TARGET: 00 LUN: 00
 Vendor identification: IBM
 Product identification: 03584L22
 Product revision level: 4.02
 Unit serial number: 71800050
 NAA: 50:11:22:33:ab:1:00:00
 Home directory: /opt/mhvtl/50
 Backoff: 400

Drive: 51 CHANNEL: 1 TARGET: 00 LUN: 01
 Library ID: 50 Slot: 01
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800051
 NAA: 50:11:22:33:ab:1:00:01
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 52 CHANNEL: 1 TARGET: 00 LUN: 2
 Library ID: 50 Slot: 2
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800052
 NAA: 50:11:22:33:ab:1:00:2
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 53 CHANNEL: 1 TARGET: 00 LUN: 3
 Library ID: 50 Slot: 3
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800053
 NAA: 50:11:22:33:ab:1:00:3
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 54 CHANNEL: 1 TARGET: 00 LUN: 4
 Library ID: 50 Slot: 4
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800054
 NAA: 50:11:22:33:ab:1:00:4
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 55 CHANNEL: 1 TARGET: 00 LUN: 5
 Library ID: 50 Slot: 5
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800055
 NAA: 50:11:22:33:ab:1:00:5
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

thanks.
Reply | Threaded
Open this post in threaded view
|

Re: can't find serial on hp msl g3(tsm 6.3 with hp msl g3)

redliquid
by the way:
i have two machine, one is mhvtl, one is tsmserver, the mhvtl startup log on mhvtl machine as below:
# cat messages          
May  5 11:46:36 vtl vtltape[24439]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24439]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24439]: add_lu(): Child PID 24440 starting logical unit [0:8:1]
May  5 11:46:36 vtl vtltape[24439]: main(): Successfully started daemon: PID 24441
May  5 11:46:36 vtl vtltape[24441]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:8:1]
May  5 11:46:36 vtl vtltape[24441]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24441]: main(): Cleaning up after add_lu child pid: 24440
May  5 11:46:36 vtl vtltape[24441]: CDB (13377) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13377)
May  5 11:46:36 vtl vtltape[24441]: CDB (13378) (delay 405): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13378)
May  5 11:46:36 vtl vtltape[24442]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24440]: add_lu(): Child anounces 'lu [0:8:1] created'.
May  5 11:46:36 vtl kernel: scsi 4:0:8:1: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:8:1: Attached scsi tape st0
May  5 11:46:36 vtl kernel: st 4:0:8:1: st0: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:8:1: Attached scsi generic sg6 type 1
May  5 11:46:36 vtl vtltape[24441]: CDB (13379) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13379)
May  5 11:46:36 vtl vtltape[24441]: CDB (13380) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13380)
May  5 11:46:36 vtl vtltape[24442]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24442]: add_lu(): Child PID 24454 starting logical unit [0:8:2]
May  5 11:46:36 vtl vtltape[24441]: CDB (13381) (delay 1205): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13381)
May  5 11:46:36 vtl vtltape[24441]: CDB (13383) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13383)
May  5 11:46:36 vtl vtltape[24441]: CDB (13384) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13384)
May  5 11:46:36 vtl vtltape[24441]: CDB (13385) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13385)
May  5 11:46:36 vtl vtltape[24441]: CDB (13386) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13386)
May  5 11:46:36 vtl vtltape[24441]: CDB (13387) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24441]: spc_inquiry(): INQUIRY ** (13387)
May  5 11:46:36 vtl vtltape[24442]: main(): Successfully started daemon: PID 24457
May  5 11:46:36 vtl vtltape[24457]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:8:2]
May  5 11:46:36 vtl vtltape[24457]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24457]: main(): Cleaning up after add_lu child pid: 24454
May  5 11:46:36 vtl vtltape[24457]: CDB (13382) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13382)
May  5 11:46:36 vtl vtltape[24457]: CDB (13388) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13388)
May  5 11:46:36 vtl kernel: scsi 4:0:8:2: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:8:2: Attached scsi tape st1
May  5 11:46:36 vtl kernel: st 4:0:8:2: st1: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:8:2: Attached scsi generic sg7 type 1
May  5 11:46:36 vtl vtltape[24454]: add_lu(): Child anounces 'lu [0:8:2] created'.
May  5 11:46:36 vtl vtltape[24458]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24458]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24457]: CDB (13389) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13389)
May  5 11:46:36 vtl vtltape[24457]: CDB (13390) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13390)
May  5 11:46:36 vtl vtltape[24458]: add_lu(): Child PID 24461 starting logical unit [0:8:3]
May  5 11:46:36 vtl vtltape[24457]: CDB (13392) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13392)
May  5 11:46:36 vtl vtltape[24457]: CDB (13393) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13393)
May  5 11:46:36 vtl vtltape[24457]: CDB (13394) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13394)
May  5 11:46:36 vtl vtltape[24457]: CDB (13395) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13395)
May  5 11:46:36 vtl vtltape[24457]: CDB (13396) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13396)
May  5 11:46:36 vtl vtltape[24457]: CDB (13397) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24457]: spc_inquiry(): INQUIRY ** (13397)
May  5 11:46:36 vtl vtltape[24458]: main(): Successfully started daemon: PID 24464
May  5 11:46:36 vtl vtltape[24464]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:8:3]
May  5 11:46:36 vtl vtltape[24464]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24464]: main(): Cleaning up after add_lu child pid: 24461
May  5 11:46:36 vtl vtltape[24464]: CDB (13391) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13391)
May  5 11:46:36 vtl vtltape[24464]: CDB (13398) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13398)
May  5 11:46:36 vtl kernel: scsi 4:0:8:3: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24461]: add_lu(): Child anounces 'lu [0:8:3] created'.
May  5 11:46:36 vtl kernel: st 4:0:8:3: Attached scsi tape st2
May  5 11:46:36 vtl kernel: st 4:0:8:3: st2: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:8:3: Attached scsi generic sg8 type 1
May  5 11:46:36 vtl vtltape[24465]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24464]: CDB (13399) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13399)
May  5 11:46:36 vtl vtltape[24464]: CDB (13400) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13400)
May  5 11:46:36 vtl vtltape[24465]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24464]: CDB (13401) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13401)
May  5 11:46:36 vtl vtltape[24464]: CDB (13402) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13402)
May  5 11:46:36 vtl vtltape[24464]: CDB (13403) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13403)
May  5 11:46:36 vtl vtltape[24464]: CDB (13404) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13404)
May  5 11:46:36 vtl vtltape[24465]: add_lu(): Child PID 24468 starting logical unit [0:8:4]
May  5 11:46:36 vtl vtltape[24464]: CDB (13405) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13405)
May  5 11:46:36 vtl vtltape[24464]: CDB (13407) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24464]: spc_inquiry(): INQUIRY ** (13407)
May  5 11:46:36 vtl vtltape[24465]: main(): Successfully started daemon: PID 24471
May  5 11:46:36 vtl vtltape[24471]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:8:4]
May  5 11:46:36 vtl vtltape[24471]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24471]: main(): Cleaning up after add_lu child pid: 24468
May  5 11:46:36 vtl vtltape[24471]: CDB (13406) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13406)
May  5 11:46:36 vtl vtltape[24471]: CDB (13408) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13408)
May  5 11:46:36 vtl vtltape[24468]: add_lu(): Child anounces 'lu [0:8:4] created'.
May  5 11:46:36 vtl vtltape[24472]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl kernel: scsi 4:0:8:4: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:8:4: Attached scsi tape st3
May  5 11:46:36 vtl kernel: st 4:0:8:4: st3: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:8:4: Attached scsi generic sg9 type 1
May  5 11:46:36 vtl vtltape[24472]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24472]: add_lu(): Child PID 24475 starting logical unit [0:8:5]
May  5 11:46:36 vtl vtltape[24471]: CDB (13410) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13410)
May  5 11:46:36 vtl vtltape[24471]: CDB (13411) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13411)
May  5 11:46:36 vtl vtltape[24471]: CDB (13412) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13412)
May  5 11:46:36 vtl vtltape[24471]: CDB (13413) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13413)
May  5 11:46:36 vtl vtltape[24471]: CDB (13414) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13414)
May  5 11:46:36 vtl vtltape[24471]: CDB (13415) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13415)
May  5 11:46:36 vtl vtltape[24471]: CDB (13416) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13416)
May  5 11:46:36 vtl vtltape[24471]: CDB (13417) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24471]: spc_inquiry(): INQUIRY ** (13417)
May  5 11:46:36 vtl vtltape[24472]: main(): Successfully started daemon: PID 24478
May  5 11:46:36 vtl vtltape[24478]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:8:5]
May  5 11:46:36 vtl vtltape[24478]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24478]: main(): Cleaning up after add_lu child pid: 24475
May  5 11:46:36 vtl vtltape[24478]: CDB (13409) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13409)
May  5 11:46:36 vtl vtltape[24479]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24478]: CDB (13418) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13418)
May  5 11:46:36 vtl vtltape[24479]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24479]: add_lu(): Child PID 24480 starting logical unit [0:8:6]
May  5 11:46:36 vtl kernel: scsi 4:0:8:5: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:8:5: Attached scsi tape st4
May  5 11:46:36 vtl kernel: st 4:0:8:5: st4: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:8:5: Attached scsi generic sg10 type 1
May  5 11:46:36 vtl vtltape[24475]: add_lu(): Child anounces 'lu [0:8:5] created'.
May  5 11:46:36 vtl vtltape[24479]: main(): Successfully started daemon: PID 24481
May  5 11:46:36 vtl vtltape[24481]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:8:6]
May  5 11:46:36 vtl vtltape[24481]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24481]: main(): Cleaning up after add_lu child pid: 24480
May  5 11:46:36 vtl vtltape[24481]: CDB (13419) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13419)
May  5 11:46:36 vtl vtltape[24481]: CDB (13420) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13420)
May  5 11:46:36 vtl kernel: scsi 4:0:8:6: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24482]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24480]: add_lu(): Child anounces 'lu [0:8:6] created'.
May  5 11:46:36 vtl kernel: st 4:0:8:6: Attached scsi tape st5
May  5 11:46:36 vtl kernel: st 4:0:8:6: st5: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:8:6: Attached scsi generic sg11 type 1
May  5 11:46:36 vtl vtltape[24482]: add_lu(): Child PID 24483 starting logical unit [0:5:1]
May  5 11:46:36 vtl vtltape[24478]: CDB (13422) (delay 4005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13422)
May  5 11:46:36 vtl vtltape[24478]: CDB (13423) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13423)
May  5 11:46:36 vtl vtltape[24478]: CDB (13424) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13424)
May  5 11:46:36 vtl vtltape[24482]: main(): Successfully started daemon: PID 24486
May  5 11:46:36 vtl vtltape[24486]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:5:1]
May  5 11:46:36 vtl vtltape[24478]: CDB (13425) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13425)
May  5 11:46:36 vtl vtltape[24478]: CDB (13426) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13426)
May  5 11:46:36 vtl vtltape[24478]: CDB (13427) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13427)
May  5 11:46:36 vtl vtltape[24486]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24478]: CDB (13428) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13428)
May  5 11:46:36 vtl vtltape[24486]: main(): Cleaning up after add_lu child pid: 24483
May  5 11:46:36 vtl vtltape[24486]: CDB (13421) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13421)
May  5 11:46:36 vtl vtltape[24486]: CDB (13429) (delay 5): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13429)
May  5 11:46:36 vtl kernel: scsi 4:0:5:1: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24478]: CDB (13430) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24478]: spc_inquiry(): INQUIRY ** (13430)
May  5 11:46:36 vtl kernel: st 4:0:5:1: Attached scsi tape st6
May  5 11:46:36 vtl kernel: st 4:0:5:1: st6: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:5:1: Attached scsi generic sg12 type 1
May  5 11:46:36 vtl vtltape[24483]: add_lu(): Child anounces 'lu [0:5:1] created'.
May  5 11:46:36 vtl vtltape[24487]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24487]: add_lu(): Child PID 24495 starting logical unit [0:5:2]
May  5 11:46:36 vtl vtltape[24486]: CDB (13432) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13432)
May  5 11:46:36 vtl vtltape[24486]: CDB (13433) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13433)
May  5 11:46:36 vtl vtltape[24486]: CDB (13434) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13434)
May  5 11:46:36 vtl vtltape[24486]: CDB (13435) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13435)
May  5 11:46:36 vtl vtltape[24486]: CDB (13436) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13436)
May  5 11:46:36 vtl vtltape[24486]: CDB (13438) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13438)
May  5 11:46:36 vtl vtltape[24481]: CDB (13437) (delay 4005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13437)
May  5 11:46:36 vtl vtltape[24481]: CDB (13439) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13439)
May  5 11:46:36 vtl vtltape[24481]: CDB (13441) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13441)
May  5 11:46:36 vtl vtltape[24481]: CDB (13442) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24486]: CDB (13440) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13440)
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13442)
May  5 11:46:36 vtl vtltape[24486]: CDB (13444) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24486]: spc_inquiry(): INQUIRY ** (13444)
May  5 11:46:36 vtl vtltape[24481]: CDB (13443) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13443)
May  5 11:46:36 vtl vtltape[24481]: CDB (13445) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13445)
May  5 11:46:36 vtl vtltape[24481]: CDB (13446) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13446)
May  5 11:46:36 vtl vtltape[24481]: CDB (13447) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24481]: spc_inquiry(): INQUIRY ** (13447)
May  5 11:46:36 vtl vtltape[24487]: main(): Successfully started daemon: PID 24503
May  5 11:46:36 vtl vtltape[24503]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:5:2]
May  5 11:46:36 vtl vtltape[24503]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24503]: main(): Cleaning up after add_lu child pid: 24495
May  5 11:46:36 vtl vtltape[24503]: CDB (13431) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13431)
May  5 11:46:36 vtl vtltape[24503]: CDB (13448) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13448)
May  5 11:46:36 vtl vtltape[24504]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24495]: add_lu(): Child anounces 'lu [0:5:2] created'.
May  5 11:46:36 vtl kernel: scsi 4:0:5:2: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:5:2: Attached scsi tape st7
May  5 11:46:36 vtl kernel: st 4:0:5:2: st7: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:5:2: Attached scsi generic sg13 type 1
May  5 11:46:36 vtl vtltape[24504]: add_lu(): Child PID 24505 starting logical unit [0:5:3]
May  5 11:46:36 vtl vtltape[24503]: CDB (13449) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13449)
May  5 11:46:36 vtl vtltape[24503]: CDB (13450) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13450)
May  5 11:46:36 vtl vtltape[24503]: CDB (13451) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13451)
May  5 11:46:36 vtl vtltape[24503]: CDB (13453) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13453)
May  5 11:46:36 vtl vtltape[24503]: CDB (13454) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13454)
May  5 11:46:36 vtl vtltape[24503]: CDB (13455) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24504]: main(): Successfully started daemon: PID 24508
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13455)
May  5 11:46:36 vtl vtltape[24503]: CDB (13456) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13456)
May  5 11:46:36 vtl vtltape[24508]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:5:3]
May  5 11:46:36 vtl vtltape[24508]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24503]: CDB (13457) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24503]: spc_inquiry(): INQUIRY ** (13457)
May  5 11:46:36 vtl vtltape[24508]: main(): Cleaning up after add_lu child pid: 24505
May  5 11:46:36 vtl vtltape[24508]: CDB (13452) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13452)
May  5 11:46:36 vtl vtltape[24508]: CDB (13458) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13458)
May  5 11:46:36 vtl vtltape[24509]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl kernel: scsi 4:0:5:3: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:5:3: Attached scsi tape st8
May  5 11:46:36 vtl kernel: st 4:0:5:3: st8: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl vtltape[24509]: add_lu(): Child PID 24512 starting logical unit [0:5:4]
May  5 11:46:36 vtl vtltape[24505]: add_lu(): Child anounces 'lu [0:5:3] created'.
May  5 11:46:36 vtl kernel: st 4:0:5:3: Attached scsi generic sg14 type 1
May  5 11:46:36 vtl vtltape[24509]: main(): Successfully started daemon: PID 24513
May  5 11:46:36 vtl vtltape[24513]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:5:4]
May  5 11:46:36 vtl vtltape[24513]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24513]: main(): Cleaning up after add_lu child pid: 24512
May  5 11:46:36 vtl vtltape[24513]: CDB (13459) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13459)
May  5 11:46:36 vtl vtltape[24513]: CDB (13460) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13460)
May  5 11:46:36 vtl vtltape[24512]: add_lu(): Child anounces 'lu [0:5:4] created'.
May  5 11:46:36 vtl vtltape[24514]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl kernel: scsi 4:0:5:4: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:5:4: Attached scsi tape st9
May  5 11:46:36 vtl kernel: st 4:0:5:4: st9: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:5:4: Attached scsi generic sg15 type 1
May  5 11:46:36 vtl vtltape[24514]: add_lu(): Child PID 24517 starting logical unit [0:5:5]
May  5 11:46:36 vtl vtltape[24513]: CDB (13461) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13461)
May  5 11:46:36 vtl vtltape[24513]: CDB (13462) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13462)
May  5 11:46:36 vtl vtltape[24513]: CDB (13463) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13463)
May  5 11:46:36 vtl vtltape[24513]: CDB (13464) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13464)
May  5 11:46:36 vtl vtltape[24513]: CDB (13465) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13465)
May  5 11:46:36 vtl vtltape[24513]: CDB (13466) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13466)
May  5 11:46:36 vtl vtltape[24513]: CDB (13468) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13468)
May  5 11:46:36 vtl vtltape[24513]: CDB (13469) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24513]: spc_inquiry(): INQUIRY ** (13469)
May  5 11:46:36 vtl vtltape[24514]: main(): Successfully started daemon: PID 24522
May  5 11:46:36 vtl vtltape[24522]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:5:5]
May  5 11:46:36 vtl vtltape[24522]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24522]: main(): Cleaning up after add_lu child pid: 24517
May  5 11:46:36 vtl vtltape[24522]: CDB (13467) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13467)
May  5 11:46:36 vtl vtltape[24522]: CDB (13472) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13472)
May  5 11:46:36 vtl vtltape[24517]: add_lu(): Child anounces 'lu [0:5:5] created'.
May  5 11:46:36 vtl kernel: scsi 4:0:5:5: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:5:5: Attached scsi tape st10
May  5 11:46:36 vtl kernel: st 4:0:5:5: st10: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:5:5: Attached scsi generic sg16 type 1
May  5 11:46:36 vtl vtltape[24508]: CDB (13470) (delay 4405): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13470)
May  5 11:46:36 vtl vtltape[24508]: CDB (13471) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13471)
May  5 11:46:36 vtl vtltape[24508]: CDB (13474) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13474)
May  5 11:46:36 vtl vtltape[24508]: CDB (13475) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13475)
May  5 11:46:36 vtl vtltape[24508]: CDB (13476) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13476)
May  5 11:46:36 vtl vtltape[24508]: CDB (13477) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13477)
May  5 11:46:36 vtl vtltape[24522]: CDB (13473) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13473)
May  5 11:46:36 vtl vtltape[24522]: CDB (13480) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13480)
May  5 11:46:36 vtl vtltape[24523]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24508]: CDB (13478) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13478)
May  5 11:46:36 vtl vtltape[24522]: CDB (13481) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24508]: CDB (13479) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13481)
May  5 11:46:36 vtl vtltape[24508]: spc_inquiry(): INQUIRY ** (13479)
May  5 11:46:36 vtl vtltape[24522]: CDB (13482) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13482)
May  5 11:46:36 vtl vtltape[24522]: CDB (13483) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13483)
May  5 11:46:36 vtl vtltape[24523]: add_lu(): Child PID 24529 starting logical unit [1:0:1]
May  5 11:46:36 vtl vtltape[24522]: CDB (13484) (delay 1205): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13484)
May  5 11:46:36 vtl vtltape[24522]: CDB (13485) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13485)
May  5 11:46:36 vtl vtltape[24522]: CDB (13487) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24522]: spc_inquiry(): INQUIRY ** (13487)
May  5 11:46:36 vtl vtltape[24523]: main(): Successfully started daemon: PID 24531
May  5 11:46:36 vtl vtltape[24531]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:0:1]
May  5 11:46:36 vtl vtltape[24531]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24531]: main(): Cleaning up after add_lu child pid: 24529
May  5 11:46:36 vtl vtltape[24531]: CDB (13486) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13486)
May  5 11:46:36 vtl vtltape[24531]: CDB (13488) (delay 405): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13488)
May  5 11:46:36 vtl vtltape[24529]: add_lu(): Child anounces 'lu [1:0:1] created'.
May  5 11:46:36 vtl kernel: scsi 4:1:0:1: Sequential-Access IBM      ULT3580-TD3      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:1:0:1: Attached scsi tape st11
May  5 11:46:36 vtl kernel: st 4:1:0:1: st11: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:1:0:1: Attached scsi generic sg17 type 1
May  5 11:46:36 vtl vtltape[24531]: CDB (13489) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13489)
May  5 11:46:36 vtl vtltape[24532]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24531]: CDB (13490) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13490)
May  5 11:46:36 vtl vtltape[24531]: CDB (13491) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13491)
May  5 11:46:36 vtl vtltape[24531]: CDB (13492) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13492)
May  5 11:46:36 vtl vtltape[24532]: add_lu(): Child PID 24535 starting logical unit [1:0:2]
May  5 11:46:36 vtl vtltape[24531]: CDB (13493) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13493)
May  5 11:46:36 vtl vtltape[24531]: CDB (13494) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13494)
May  5 11:46:36 vtl vtltape[24531]: CDB (13496) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13496)
May  5 11:46:36 vtl vtltape[24531]: CDB (13497) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24531]: spc_inquiry(): INQUIRY ** (13497)
May  5 11:46:36 vtl vtltape[24532]: main(): Successfully started daemon: PID 24538
May  5 11:46:36 vtl vtltape[24538]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:0:2]
May  5 11:46:36 vtl vtltape[24538]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24538]: main(): Cleaning up after add_lu child pid: 24535
May  5 11:46:36 vtl vtltape[24538]: CDB (13495) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13495)
May  5 11:46:36 vtl vtltape[24538]: CDB (13498) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13498)
May  5 11:46:36 vtl kernel: scsi 4:1:0:2: Sequential-Access IBM      ULT3580-TD3      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:1:0:2: Attached scsi tape st12
May  5 11:46:36 vtl kernel: st 4:1:0:2: st12: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:1:0:2: Attached scsi generic sg18 type 1
May  5 11:46:36 vtl vtltape[24535]: add_lu(): Child anounces 'lu [1:0:2] created'.
May  5 11:46:36 vtl vtltape[24539]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24538]: CDB (13499) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13499)
May  5 11:46:36 vtl vtltape[24538]: CDB (13500) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13500)
May  5 11:46:36 vtl vtltape[24538]: CDB (13501) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13501)
May  5 11:46:36 vtl vtltape[24539]: add_lu(): Child PID 24542 starting logical unit [1:0:3]
May  5 11:46:36 vtl vtltape[24538]: CDB (13502) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13502)
May  5 11:46:36 vtl vtltape[24538]: CDB (13504) (delay 405): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13504)
May  5 11:46:36 vtl vtltape[24538]: CDB (13505) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13505)
May  5 11:46:36 vtl vtltape[24538]: CDB (13506) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13506)
May  5 11:46:36 vtl vtltape[24538]: CDB (13507) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24538]: spc_inquiry(): INQUIRY ** (13507)
May  5 11:46:36 vtl vtltape[24539]: main(): Successfully started daemon: PID 24545
May  5 11:46:36 vtl vtltape[24545]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:0:3]
May  5 11:46:36 vtl vtltape[24545]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24545]: main(): Cleaning up after add_lu child pid: 24542
May  5 11:46:36 vtl vtltape[24545]: CDB (13503) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13503)
May  5 11:46:36 vtl vtltape[24545]: CDB (13508) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13508)
May  5 11:46:36 vtl vtltape[24542]: add_lu(): Child anounces 'lu [1:0:3] created'.
May  5 11:46:36 vtl kernel: scsi 4:1:0:3: Sequential-Access IBM      ULT3580-TD3      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:1:0:3: Attached scsi tape st13
May  5 11:46:36 vtl kernel: st 4:1:0:3: st13: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:1:0:3: Attached scsi generic sg19 type 1
May  5 11:46:36 vtl vtltape[24545]: CDB (13509) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13509)
May  5 11:46:36 vtl vtltape[24546]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24545]: CDB (13510) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13510)
May  5 11:46:36 vtl vtltape[24545]: CDB (13511) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13511)
May  5 11:46:36 vtl vtltape[24545]: CDB (13512) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13512)
May  5 11:46:36 vtl vtltape[24545]: CDB (13513) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13513)
May  5 11:46:36 vtl vtltape[24545]: CDB (13514) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13514)
May  5 11:46:36 vtl vtltape[24545]: CDB (13515) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13515)
May  5 11:46:36 vtl vtltape[24545]: CDB (13516) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24545]: spc_inquiry(): INQUIRY ** (13516)
May  5 11:46:36 vtl vtltape[24546]: add_lu(): Child PID 24549 starting logical unit [1:0:4]
May  5 11:46:36 vtl vtltape[24546]: main(): Successfully started daemon: PID 24552
May  5 11:46:36 vtl vtltape[24552]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:0:4]
May  5 11:46:36 vtl vtltape[24552]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24552]: main(): Cleaning up after add_lu child pid: 24549
May  5 11:46:36 vtl vtltape[24552]: CDB (13517) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13517)
May  5 11:46:36 vtl vtltape[24552]: CDB (13518) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13518)
May  5 11:46:36 vtl kernel: scsi 4:1:0:4: Sequential-Access IBM      ULT3580-TD3      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:1:0:4: Attached scsi tape st14
May  5 11:46:36 vtl vtltape[24549]: add_lu(): Child anounces 'lu [1:0:4] created'.
May  5 11:46:36 vtl kernel: st 4:1:0:4: st14: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:1:0:4: Attached scsi generic sg20 type 1
May  5 11:46:36 vtl vtltape[24552]: CDB (13519) (delay 405): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24553]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13519)
May  5 11:46:36 vtl vtltape[24553]: add_lu(): Child PID 24556 starting logical unit [1:0:5]
May  5 11:46:36 vtl vtltape[24552]: CDB (13520) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13520)
May  5 11:46:36 vtl vtltape[24552]: CDB (13522) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13522)
May  5 11:46:36 vtl vtltape[24552]: CDB (13523) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13523)
May  5 11:46:36 vtl vtltape[24552]: CDB (13524) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13524)
May  5 11:46:36 vtl vtltape[24552]: CDB (13525) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13525)
May  5 11:46:36 vtl vtltape[24552]: CDB (13526) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13526)
May  5 11:46:36 vtl vtltape[24552]: CDB (13527) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24552]: spc_inquiry(): INQUIRY ** (13527)
May  5 11:46:36 vtl vtltape[24553]: main(): Successfully started daemon: PID 24559
May  5 11:46:36 vtl vtltape[24559]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:0:5]
May  5 11:46:36 vtl vtltape[24559]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24559]: main(): Cleaning up after add_lu child pid: 24556
May  5 11:46:36 vtl vtltape[24559]: CDB (13521) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13521)
May  5 11:46:36 vtl vtltape[24559]: CDB (13528) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13528)
May  5 11:46:36 vtl kernel: scsi 4:1:0:5: Sequential-Access IBM      ULT3580-TD3      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24556]: add_lu(): Child anounces 'lu [1:0:5] created'.
May  5 11:46:36 vtl kernel: st 4:1:0:5: Attached scsi tape st15
May  5 11:46:36 vtl kernel: st 4:1:0:5: st15: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:1:0:5: Attached scsi generic sg21 type 1
May  5 11:46:36 vtl vtltape[24560]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24560]: add_lu(): Child PID 24563 starting logical unit [1:2:1]
May  5 11:46:36 vtl vtltape[24559]: CDB (13529) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13529)
May  5 11:46:36 vtl vtltape[24559]: CDB (13531) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13531)
May  5 11:46:36 vtl vtltape[24559]: CDB (13532) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13532)
May  5 11:46:36 vtl vtltape[24559]: CDB (13533) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13533)
May  5 11:46:36 vtl vtltape[24559]: CDB (13534) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13534)
May  5 11:46:36 vtl vtltape[24559]: CDB (13535) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13535)
May  5 11:46:36 vtl vtltape[24559]: CDB (13536) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13536)
May  5 11:46:36 vtl vtltape[24559]: CDB (13537) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24559]: spc_inquiry(): INQUIRY ** (13537)
May  5 11:46:36 vtl vtltape[24560]: main(): Successfully started daemon: PID 24566
May  5 11:46:36 vtl vtltape[24566]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:2:1]
May  5 11:46:36 vtl vtltape[24566]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24566]: main(): Cleaning up after add_lu child pid: 24563
May  5 11:46:36 vtl vtltape[24566]: CDB (13530) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13530)
May  5 11:46:36 vtl vtltape[24566]: CDB (13538) (delay 805): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13538)
May  5 11:46:36 vtl vtltape[24567]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl kernel: scsi 4:1:2:1: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24563]: add_lu(): Child anounces 'lu [1:2:1] created'.
May  5 11:46:36 vtl vtltape[24567]: add_lu(): Child PID 24569 starting logical unit [1:2:2]
May  5 11:46:36 vtl kernel: st 4:1:2:1: Attached scsi tape st16
May  5 11:46:36 vtl kernel: st 4:1:2:1: st16: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:1:2:1: Attached scsi generic sg22 type 1
May  5 11:46:36 vtl vtltape[24566]: CDB (13540) (delay 2405): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13540)
May  5 11:46:36 vtl vtltape[24566]: CDB (13541) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13541)
May  5 11:46:36 vtl vtltape[24566]: CDB (13542) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13542)
May  5 11:46:36 vtl vtltape[24566]: CDB (13543) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13543)
May  5 11:46:36 vtl vtltape[24566]: CDB (13544) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13544)
May  5 11:46:36 vtl vtltape[24566]: CDB (13545) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13545)
May  5 11:46:36 vtl vtltape[24566]: CDB (13546) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13546)
May  5 11:46:36 vtl vtltape[24566]: CDB (13547) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24566]: spc_inquiry(): INQUIRY ** (13547)
May  5 11:46:36 vtl vtltape[24567]: main(): Successfully started daemon: PID 24574
May  5 11:46:36 vtl vtltape[24574]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:2:2]
May  5 11:46:36 vtl vtltape[24574]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24574]: main(): Cleaning up after add_lu child pid: 24569
May  5 11:46:36 vtl vtltape[24574]: CDB (13539) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13539)
May  5 11:46:36 vtl vtltape[24574]: CDB (13548) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13548)
May  5 11:46:36 vtl kernel: scsi 4:1:2:2: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:1:2:2: Attached scsi tape st17
May  5 11:46:36 vtl kernel: st 4:1:2:2: st17: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl vtltape[24569]: add_lu(): Child anounces 'lu [1:2:2] created'.
May  5 11:46:36 vtl kernel: st 4:1:2:2: Attached scsi generic sg23 type 1
May  5 11:46:36 vtl vtltape[24575]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24574]: CDB (13549) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13549)
May  5 11:46:36 vtl vtltape[24574]: CDB (13550) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13550)
May  5 11:46:36 vtl vtltape[24574]: CDB (13551) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13551)
May  5 11:46:36 vtl vtltape[24575]: add_lu(): Child PID 24578 starting logical unit [1:2:3]
May  5 11:46:36 vtl vtltape[24574]: CDB (13552) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13552)
May  5 11:46:36 vtl vtltape[24574]: CDB (13553) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13553)
May  5 11:46:36 vtl vtltape[24574]: CDB (13555) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13555)
May  5 11:46:36 vtl vtltape[24574]: CDB (13556) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13556)
May  5 11:46:36 vtl vtltape[24574]: CDB (13557) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24574]: spc_inquiry(): INQUIRY ** (13557)
May  5 11:46:36 vtl vtltape[24575]: main(): Successfully started daemon: PID 24581
May  5 11:46:36 vtl vtltape[24581]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:2:3]
May  5 11:46:36 vtl vtltape[24581]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24581]: main(): Cleaning up after add_lu child pid: 24578
May  5 11:46:36 vtl vtltape[24581]: CDB (13554) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13554)
May  5 11:46:36 vtl vtltape[24581]: CDB (13558) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13558)
May  5 11:46:36 vtl kernel: scsi 4:1:2:3: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:1:2:3: Attached scsi tape st18
May  5 11:46:36 vtl kernel: st 4:1:2:3: st18: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:1:2:3: Attached scsi generic sg24 type 1
May  5 11:46:36 vtl vtltape[24578]: add_lu(): Child anounces 'lu [1:2:3] created'.
May  5 11:46:36 vtl vtltape[24581]: CDB (13559) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13559)
May  5 11:46:36 vtl vtltape[24581]: CDB (13560) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13560)
May  5 11:46:36 vtl vtltape[24581]: CDB (13561) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13561)
May  5 11:46:36 vtl vtltape[24582]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24581]: CDB (13562) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13562)
May  5 11:46:36 vtl vtltape[24581]: CDB (13563) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13563)
May  5 11:46:36 vtl vtltape[24581]: CDB (13564) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13564)
May  5 11:46:36 vtl vtltape[24581]: CDB (13565) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13565)
May  5 11:46:36 vtl vtltape[24581]: CDB (13566) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24581]: spc_inquiry(): INQUIRY ** (13566)
May  5 11:46:36 vtl vtltape[24582]: add_lu(): Child PID 24585 starting logical unit [1:2:4]
May  5 11:46:36 vtl vtltape[24582]: main(): Successfully started daemon: PID 24588
May  5 11:46:36 vtl vtltape[24588]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:2:4]
May  5 11:46:36 vtl vtltape[24588]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24588]: main(): Cleaning up after add_lu child pid: 24585
May  5 11:46:36 vtl vtltape[24588]: CDB (13567) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13567)
May  5 11:46:36 vtl vtltape[24588]: CDB (13568) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13568)
May  5 11:46:36 vtl vtltape[24585]: add_lu(): Child anounces 'lu [1:2:4] created'.
May  5 11:46:36 vtl kernel: scsi 4:1:2:4: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:1:2:4: Attached scsi tape st19
May  5 11:46:36 vtl kernel: st 4:1:2:4: st19: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:1:2:4: Attached scsi generic sg25 type 1
May  5 11:46:36 vtl vtltape[24588]: CDB (13569) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13569)
May  5 11:46:36 vtl vtltape[24589]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24588]: CDB (13570) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13570)
May  5 11:46:36 vtl vtltape[24588]: CDB (13571) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13571)
May  5 11:46:36 vtl vtltape[24588]: CDB (13572) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13572)
May  5 11:46:36 vtl vtltape[24588]: CDB (13573) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13573)
May  5 11:46:36 vtl vtltape[24588]: CDB (13574) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13574)
May  5 11:46:36 vtl vtltape[24589]: add_lu(): Child PID 24592 starting logical unit [1:2:5]
May  5 11:46:36 vtl vtltape[24588]: CDB (13576) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13576)
May  5 11:46:36 vtl vtltape[24588]: CDB (13577) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24588]: spc_inquiry(): INQUIRY ** (13577)
May  5 11:46:36 vtl vtltape[24589]: main(): Successfully started daemon: PID 24595
May  5 11:46:36 vtl vtltape[24595]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [1:2:5]
May  5 11:46:36 vtl vtltape[24595]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24595]: main(): Cleaning up after add_lu child pid: 24592
May  5 11:46:36 vtl vtltape[24595]: CDB (13575) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13575)
May  5 11:46:36 vtl vtltape[24595]: CDB (13578) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13578)
May  5 11:46:36 vtl kernel: scsi 4:1:2:5: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:1:2:5: Attached scsi tape st20
May  5 11:46:36 vtl kernel: st 4:1:2:5: st20: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl vtltape[24596]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24592]: add_lu(): Child anounces 'lu [1:2:5] created'.
May  5 11:46:36 vtl kernel: st 4:1:2:5: Attached scsi generic sg26 type 1
May  5 11:46:36 vtl vtltape[24596]: add_lu(): Child PID 24598 starting logical unit [2:2:1]
May  5 11:46:36 vtl vtltape[24595]: CDB (13580) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13580)
May  5 11:46:36 vtl vtltape[24595]: CDB (13581) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13581)
May  5 11:46:36 vtl vtltape[24595]: CDB (13582) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13582)
May  5 11:46:36 vtl vtltape[24595]: CDB (13583) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13583)
May  5 11:46:36 vtl vtltape[24595]: CDB (13584) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13584)
May  5 11:46:36 vtl vtltape[24595]: CDB (13585) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13585)
May  5 11:46:36 vtl vtltape[24595]: CDB (13586) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13586)
May  5 11:46:36 vtl vtltape[24595]: CDB (13587) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24595]: spc_inquiry(): INQUIRY ** (13587)
May  5 11:46:36 vtl vtltape[24596]: main(): Successfully started daemon: PID 24603
May  5 11:46:36 vtl vtltape[24603]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [2:2:1]
May  5 11:46:36 vtl vtltape[24603]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24603]: main(): Cleaning up after add_lu child pid: 24598
May  5 11:46:36 vtl vtltape[24603]: CDB (13579) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13579)
May  5 11:46:36 vtl vtltape[24603]: CDB (13588) (delay 405): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13588)
May  5 11:46:36 vtl vtltape[24598]: add_lu(): Child anounces 'lu [2:2:1] created'.
May  5 11:46:36 vtl kernel: scsi 4:2:2:1: Sequential-Access HP       Ultrium 5-SCSI   Y34W PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:2:2:1: Attached scsi tape st21
May  5 11:46:36 vtl kernel: st 4:2:2:1: st21: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:2:2:1: Attached scsi generic sg27 type 1
May  5 11:46:36 vtl vtltape[24603]: CDB (13589) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13589)
May  5 11:46:36 vtl vtltape[24603]: CDB (13590) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13590)
May  5 11:46:36 vtl vtltape[24604]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24603]: CDB (13591) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13591)
May  5 11:46:36 vtl vtltape[24603]: CDB (13592) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13592)
May  5 11:46:36 vtl vtltape[24603]: CDB (13593) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13593)
May  5 11:46:36 vtl vtltape[24603]: CDB (13594) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13594)
May  5 11:46:36 vtl vtltape[24603]: CDB (13595) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13595)
May  5 11:46:36 vtl vtltape[24603]: CDB (13596) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24603]: spc_inquiry(): INQUIRY ** (13596)
May  5 11:46:36 vtl vtltape[24604]: add_lu(): Child PID 24608 starting logical unit [2:2:2]
May  5 11:46:36 vtl vtltape[24604]: main(): Successfully started daemon: PID 24610
May  5 11:46:36 vtl vtltape[24610]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [2:2:2]
May  5 11:46:36 vtl vtltape[24610]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24610]: main(): Cleaning up after add_lu child pid: 24608
May  5 11:46:36 vtl vtltape[24610]: CDB (13597) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13597)
May  5 11:46:36 vtl vtltape[24610]: CDB (13598) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13598)
May  5 11:46:36 vtl kernel: scsi 4:2:2:2: Sequential-Access HP       Ultrium 5-SCSI   Y5BW PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:2:2:2: Attached scsi tape st22
May  5 11:46:36 vtl kernel: st 4:2:2:2: st22: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:2:2:2: Attached scsi generic sg28 type 1
May  5 11:46:36 vtl vtltape[24608]: add_lu(): Child anounces 'lu [2:2:2] created'.
May  5 11:46:36 vtl vtltape[24611]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24610]: CDB (13599) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13599)
May  5 11:46:36 vtl vtltape[24610]: CDB (13600) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13600)
May  5 11:46:36 vtl vtltape[24610]: CDB (13601) (delay 405): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13601)
May  5 11:46:36 vtl vtltape[24610]: CDB (13602) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24611]: add_lu(): Child PID 24614 starting logical unit [2:2:3]
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13602)
May  5 11:46:36 vtl vtltape[24610]: CDB (13604) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13604)
May  5 11:46:36 vtl vtltape[24610]: CDB (13605) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13605)
May  5 11:46:36 vtl vtltape[24610]: CDB (13606) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13606)
May  5 11:46:36 vtl vtltape[24610]: CDB (13607) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24610]: spc_inquiry(): INQUIRY ** (13607)
May  5 11:46:36 vtl vtltape[24611]: main(): Successfully started daemon: PID 24617
May  5 11:46:36 vtl vtltape[24617]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [2:2:3]
May  5 11:46:36 vtl vtltape[24617]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24617]: main(): Cleaning up after add_lu child pid: 24614
May  5 11:46:36 vtl vtltape[24617]: CDB (13603) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13603)
May  5 11:46:36 vtl vtltape[24617]: CDB (13608) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13608)
May  5 11:46:36 vtl kernel: scsi 4:2:2:3: Sequential-Access HP       Ultrium 5-SCSI   Y34W PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:2:2:3: Attached scsi tape st23
May  5 11:46:36 vtl kernel: st 4:2:2:3: st23: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:2:2:3: Attached scsi generic sg29 type 1
May  5 11:46:36 vtl vtltape[24614]: add_lu(): Child anounces 'lu [2:2:3] created'.
May  5 11:46:36 vtl vtltape[24618]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24617]: CDB (13609) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13609)
May  5 11:46:36 vtl vtltape[24617]: CDB (13610) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13610)
May  5 11:46:36 vtl vtltape[24617]: CDB (13611) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13611)
May  5 11:46:36 vtl vtltape[24618]: add_lu(): Child PID 24621 starting logical unit [2:2:4]
May  5 11:46:36 vtl vtltape[24617]: CDB (13612) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13612)
May  5 11:46:36 vtl vtltape[24617]: CDB (13614) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13614)
May  5 11:46:36 vtl vtltape[24617]: CDB (13615) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13615)
May  5 11:46:36 vtl vtltape[24617]: CDB (13616) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13616)
May  5 11:46:36 vtl vtltape[24617]: CDB (13617) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24617]: spc_inquiry(): INQUIRY ** (13617)
May  5 11:46:36 vtl vtltape[24618]: main(): Successfully started daemon: PID 24624
May  5 11:46:36 vtl vtltape[24624]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [2:2:4]
May  5 11:46:36 vtl vtltape[24624]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24624]: main(): Cleaning up after add_lu child pid: 24621
May  5 11:46:36 vtl vtltape[24624]: CDB (13613) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13613)
May  5 11:46:36 vtl vtltape[24624]: CDB (13618) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13618)
May  5 11:46:36 vtl vtltape[24621]: add_lu(): Child anounces 'lu [2:2:4] created'.
May  5 11:46:36 vtl kernel: scsi 4:2:2:4: Sequential-Access HP       Ultrium 5-SCSI   Y5BW PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:2:2:4: Attached scsi tape st24
May  5 11:46:36 vtl kernel: st 4:2:2:4: st24: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:2:2:4: Attached scsi generic sg30 type 1
May  5 11:46:36 vtl vtltape[24625]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24625]: add_lu(): Child PID 24628 starting logical unit [2:8:1]
May  5 11:46:36 vtl vtltape[24624]: CDB (13619) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13619)
May  5 11:46:36 vtl vtltape[24624]: CDB (13621) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13621)
May  5 11:46:36 vtl vtltape[24624]: CDB (13622) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13622)
May  5 11:46:36 vtl vtltape[24624]: CDB (13623) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13623)
May  5 11:46:36 vtl vtltape[24624]: CDB (13624) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13624)
May  5 11:46:36 vtl vtltape[24624]: CDB (13625) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13625)
May  5 11:46:36 vtl vtltape[24624]: CDB (13626) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13626)
May  5 11:46:36 vtl vtltape[24624]: CDB (13627) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24624]: spc_inquiry(): INQUIRY ** (13627)
May  5 11:46:36 vtl vtltape[24625]: main(): Successfully started daemon: PID 24631
May  5 11:46:36 vtl vtltape[24631]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [2:8:1]
May  5 11:46:36 vtl vtltape[24631]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24631]: main(): Cleaning up after add_lu child pid: 24628
May  5 11:46:36 vtl vtltape[24631]: CDB (13620) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13620)
May  5 11:46:36 vtl vtltape[24631]: CDB (13628) (delay 405): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13628)
May  5 11:46:36 vtl kernel: scsi 4:2:8:1: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:2:8:1: Attached scsi tape st25
May  5 11:46:36 vtl kernel: st 4:2:8:1: st25: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:2:8:1: Attached scsi generic sg31 type 1
May  5 11:46:36 vtl vtltape[24628]: add_lu(): Child anounces 'lu [2:8:1] created'.
May  5 11:46:36 vtl vtltape[24632]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24632]: add_lu(): Child PID 24635 starting logical unit [2:8:2]
May  5 11:46:36 vtl vtltape[24631]: CDB (13629) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13629)
May  5 11:46:36 vtl vtltape[24631]: CDB (13631) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13631)
May  5 11:46:36 vtl vtltape[24631]: CDB (13632) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13632)
May  5 11:46:36 vtl vtltape[24631]: CDB (13633) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13633)
May  5 11:46:36 vtl vtltape[24631]: CDB (13634) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13634)
May  5 11:46:36 vtl vtltape[24631]: CDB (13635) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13635)
May  5 11:46:36 vtl vtltape[24631]: CDB (13636) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13636)
May  5 11:46:36 vtl vtltape[24631]: CDB (13637) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24631]: spc_inquiry(): INQUIRY ** (13637)
May  5 11:46:36 vtl vtltape[24632]: main(): Successfully started daemon: PID 24638
May  5 11:46:36 vtl vtltape[24638]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [2:8:2]
May  5 11:46:36 vtl vtltape[24638]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24638]: main(): Cleaning up after add_lu child pid: 24635
May  5 11:46:36 vtl vtltape[24638]: CDB (13630) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13630)
May  5 11:46:36 vtl vtltape[24638]: CDB (13638) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13638)
May  5 11:46:36 vtl vtltape[24639]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24635]: add_lu(): Child anounces 'lu [2:8:2] created'.
May  5 11:46:36 vtl kernel: scsi 4:2:8:2: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:2:8:2: Attached scsi tape st26
May  5 11:46:36 vtl kernel: st 4:2:8:2: st26: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:2:8:2: Attached scsi generic sg32 type 1
May  5 11:46:36 vtl vtltape[24639]: add_lu(): Child PID 24640 starting logical unit [2:8:3]
May  5 11:46:36 vtl vtltape[24639]: main(): Successfully started daemon: PID 24641
May  5 11:46:36 vtl vtltape[24641]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [2:8:3]
May  5 11:46:36 vtl vtltape[24641]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24641]: main(): Cleaning up after add_lu child pid: 24640
May  5 11:46:36 vtl vtltape[24641]: CDB (13639) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13639)
May  5 11:46:36 vtl vtltape[24641]: CDB (13640) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13640)
May  5 11:46:36 vtl kernel: scsi 4:2:8:3: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:2:8:3: Attached scsi tape st27
May  5 11:46:36 vtl kernel: st 4:2:8:3: st27: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:2:8:3: Attached scsi generic sg33 type 1
May  5 11:46:36 vtl vtltape[24640]: add_lu(): Child anounces 'lu [2:8:3] created'.
May  5 11:46:36 vtl vtltape[24641]: CDB (13641) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13641)
May  5 11:46:36 vtl vtltape[24641]: CDB (13642) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13642)
May  5 11:46:36 vtl vtltape[24641]: CDB (13643) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13643)
May  5 11:46:36 vtl vtltape[24641]: CDB (13644) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13644)
May  5 11:46:36 vtl vtltape[24641]: CDB (13645) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13645)
May  5 11:46:36 vtl vtltape[24641]: CDB (13646) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13646)
May  5 11:46:36 vtl vtltape[24642]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24641]: CDB (13647) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13647)
May  5 11:46:36 vtl vtltape[24641]: CDB (13648) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24641]: spc_inquiry(): INQUIRY ** (13648)
May  5 11:46:36 vtl vtltape[24642]: add_lu(): Child PID 24647 starting logical unit [2:8:4]
May  5 11:46:36 vtl vtltape[24638]: CDB (13650) (delay 4005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13650)
May  5 11:46:36 vtl vtltape[24638]: CDB (13651) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13651)
May  5 11:46:36 vtl vtltape[24638]: CDB (13652) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13652)
May  5 11:46:36 vtl vtltape[24638]: CDB (13653) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13653)
May  5 11:46:36 vtl vtltape[24638]: CDB (13654) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13654)
May  5 11:46:36 vtl vtltape[24638]: CDB (13655) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13655)
May  5 11:46:36 vtl vtltape[24638]: CDB (13656) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13656)
May  5 11:46:36 vtl vtltape[24638]: CDB (13657) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24638]: spc_inquiry(): INQUIRY ** (13657)
May  5 11:46:36 vtl vtltape[24642]: main(): Successfully started daemon: PID 24652
May  5 11:46:36 vtl vtltape[24652]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [2:8:4]
May  5 11:46:36 vtl vtltape[24652]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24652]: main(): Cleaning up after add_lu child pid: 24647
May  5 11:46:36 vtl vtltape[24652]: CDB (13649) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13649)
May  5 11:46:36 vtl vtltape[24652]: CDB (13658) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13658)
May  5 11:46:36 vtl vtltape[24647]: add_lu(): Child anounces 'lu [2:8:4] created'.
May  5 11:46:36 vtl kernel: scsi 4:2:8:4: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:2:8:4: Attached scsi tape st28
May  5 11:46:36 vtl kernel: st 4:2:8:4: st28: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:2:8:4: Attached scsi generic sg34 type 1
May  5 11:46:36 vtl vtltape[24653]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24652]: CDB (13659) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13659)
May  5 11:46:36 vtl vtltape[24652]: CDB (13660) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13660)
May  5 11:46:36 vtl vtltape[24652]: CDB (13661) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13661)
May  5 11:46:36 vtl vtltape[24652]: CDB (13662) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13662)
May  5 11:46:36 vtl vtltape[24652]: CDB (13663) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13663)
May  5 11:46:36 vtl vtltape[24652]: CDB (13664) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13664)
May  5 11:46:36 vtl vtltape[24652]: CDB (13665) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13665)
May  5 11:46:36 vtl vtltape[24652]: CDB (13666) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24652]: spc_inquiry(): INQUIRY ** (13666)
May  5 11:46:36 vtl vtltape[24653]: add_lu(): Child PID 24658 starting logical unit [2:8:5]
May  5 11:46:36 vtl vtltape[24653]: main(): Successfully started daemon: PID 24659
May  5 11:46:36 vtl vtltape[24659]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [2:8:5]
May  5 11:46:36 vtl vtltape[24659]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24659]: main(): Cleaning up after add_lu child pid: 24658
May  5 11:46:36 vtl vtltape[24659]: CDB (13667) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13667)
May  5 11:46:36 vtl vtltape[24659]: CDB (13668) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13668)
May  5 11:46:36 vtl kernel: scsi 4:2:8:5: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:2:8:5: Attached scsi tape st29
May  5 11:46:36 vtl kernel: st 4:2:8:5: st29: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl vtltape[24660]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24658]: add_lu(): Child anounces 'lu [2:8:5] created'.
May  5 11:46:36 vtl vtltape[24660]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl kernel: st 4:2:8:5: Attached scsi generic sg35 type 1
May  5 11:46:36 vtl vtltape[24660]: add_lu(): Child PID 24661 starting logical unit [0:9:1]
May  5 11:46:36 vtl vtltape[24660]: main(): Successfully started daemon: PID 24662
May  5 11:46:36 vtl vtltape[24662]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:9:1]
May  5 11:46:36 vtl vtltape[24662]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24662]: main(): Cleaning up after add_lu child pid: 24661
May  5 11:46:36 vtl vtltape[24662]: CDB (13669) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13669)
May  5 11:46:36 vtl vtltape[24662]: CDB (13670) (delay 5): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13670)
May  5 11:46:36 vtl kernel: scsi 4:0:9:1: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24661]: add_lu(): Child anounces 'lu [0:9:1] created'.
May  5 11:46:36 vtl kernel: st 4:0:9:1: Attached scsi tape st30
May  5 11:46:36 vtl kernel: st 4:0:9:1: st30: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:9:1: Attached scsi generic sg36 type 1
May  5 11:46:36 vtl vtltape[24659]: CDB (13671) (delay 3605): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13671)
May  5 11:46:36 vtl vtltape[24659]: CDB (13672) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13672)
May  5 11:46:36 vtl vtltape[24659]: CDB (13674) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24662]: CDB (13673) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13674)
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13673)
May  5 11:46:36 vtl vtltape[24659]: CDB (13675) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13675)
May  5 11:46:36 vtl vtltape[24662]: CDB (13676) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13676)
May  5 11:46:36 vtl vtltape[24662]: CDB (13677) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13677)
May  5 11:46:36 vtl vtltape[24659]: CDB (13678) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13678)
May  5 11:46:36 vtl vtltape[24663]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24662]: CDB (13679) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13679)
May  5 11:46:36 vtl vtltape[24662]: CDB (13680) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13680)
May  5 11:46:36 vtl vtltape[24659]: CDB (13682) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13682)
May  5 11:46:36 vtl vtltape[24662]: CDB (13681) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13681)
May  5 11:46:36 vtl vtltape[24659]: CDB (13683) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13683)
May  5 11:46:36 vtl vtltape[24659]: CDB (13684) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24659]: spc_inquiry(): INQUIRY ** (13684)
May  5 11:46:36 vtl vtltape[24663]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24662]: CDB (13685) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13685)
May  5 11:46:36 vtl vtltape[24663]: add_lu(): Child PID 24671 starting logical unit [0:9:2]
May  5 11:46:36 vtl vtltape[24662]: CDB (13686) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24662]: spc_inquiry(): INQUIRY ** (13686)
May  5 11:46:36 vtl vtltape[24663]: main(): Successfully started daemon: PID 24673
May  5 11:46:36 vtl vtltape[24673]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:9:2]
May  5 11:46:36 vtl vtltape[24673]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24673]: main(): Cleaning up after add_lu child pid: 24671
May  5 11:46:36 vtl vtltape[24673]: CDB (13687) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13687)
May  5 11:46:36 vtl vtltape[24673]: CDB (13688) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13688)
May  5 11:46:36 vtl kernel: scsi 4:0:9:2: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24674]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24671]: add_lu(): Child anounces 'lu [0:9:2] created'.
May  5 11:46:36 vtl kernel: st 4:0:9:2: Attached scsi tape st31
May  5 11:46:36 vtl kernel: st 4:0:9:2: st31: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:9:2: Attached scsi generic sg37 type 1
May  5 11:46:36 vtl vtltape[24674]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24674]: add_lu(): Child PID 24677 starting logical unit [0:9:3]
May  5 11:46:36 vtl vtltape[24673]: CDB (13689) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13689)
May  5 11:46:36 vtl vtltape[24673]: CDB (13690) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13690)
May  5 11:46:36 vtl vtltape[24673]: CDB (13692) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13692)
May  5 11:46:36 vtl vtltape[24673]: CDB (13693) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13693)
May  5 11:46:36 vtl vtltape[24673]: CDB (13694) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13694)
May  5 11:46:36 vtl vtltape[24673]: CDB (13695) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13695)
May  5 11:46:36 vtl vtltape[24673]: CDB (13696) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13696)
May  5 11:46:36 vtl vtltape[24673]: CDB (13697) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24673]: spc_inquiry(): INQUIRY ** (13697)
May  5 11:46:36 vtl vtltape[24674]: main(): Successfully started daemon: PID 24680
May  5 11:46:36 vtl vtltape[24680]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:9:3]
May  5 11:46:36 vtl vtltape[24680]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24680]: main(): Cleaning up after add_lu child pid: 24677
May  5 11:46:36 vtl vtltape[24680]: CDB (13691) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13691)
May  5 11:46:36 vtl vtltape[24680]: CDB (13698) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13698)
May  5 11:46:36 vtl kernel: scsi 4:0:9:3: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:9:3: Attached scsi tape st32
May  5 11:46:36 vtl kernel: st 4:0:9:3: st32: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl vtltape[24677]: add_lu(): Child anounces 'lu [0:9:3] created'.
May  5 11:46:36 vtl kernel: st 4:0:9:3: Attached scsi generic sg38 type 1
May  5 11:46:36 vtl vtltape[24680]: CDB (13699) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13699)
May  5 11:46:36 vtl vtltape[24681]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24681]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24680]: CDB (13700) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13700)
May  5 11:46:36 vtl vtltape[24681]: add_lu(): Child PID 24684 starting logical unit [0:9:4]
May  5 11:46:36 vtl vtltape[24680]: CDB (13701) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13701)
May  5 11:46:36 vtl vtltape[24680]: CDB (13702) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13702)
May  5 11:46:36 vtl vtltape[24680]: CDB (13703) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13703)
May  5 11:46:36 vtl vtltape[24680]: CDB (13705) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13705)
May  5 11:46:36 vtl vtltape[24680]: CDB (13706) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13706)
May  5 11:46:36 vtl vtltape[24680]: CDB (13707) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24680]: spc_inquiry(): INQUIRY ** (13707)
May  5 11:46:36 vtl vtltape[24681]: main(): Successfully started daemon: PID 24687
May  5 11:46:36 vtl vtltape[24687]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:9:4]
May  5 11:46:36 vtl vtltape[24687]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24687]: main(): Cleaning up after add_lu child pid: 24684
May  5 11:46:36 vtl vtltape[24687]: CDB (13704) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13704)
May  5 11:46:36 vtl vtltape[24687]: CDB (13708) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13708)
May  5 11:46:36 vtl kernel: scsi 4:0:9:4: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24684]: add_lu(): Child anounces 'lu [0:9:4] created'.
May  5 11:46:36 vtl kernel: st 4:0:9:4: Attached scsi tape st33
May  5 11:46:36 vtl kernel: st 4:0:9:4: st33: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:9:4: Attached scsi generic sg39 type 1
May  5 11:46:36 vtl vtltape[24687]: CDB (13709) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24688]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13709)
May  5 11:46:36 vtl vtltape[24687]: CDB (13710) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13710)
May  5 11:46:36 vtl vtltape[24688]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24687]: CDB (13711) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13711)
May  5 11:46:36 vtl vtltape[24687]: CDB (13712) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13712)
May  5 11:46:36 vtl vtltape[24688]: add_lu(): Child PID 24691 starting logical unit [0:9:5]
May  5 11:46:36 vtl vtltape[24687]: CDB (13714) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13714)
May  5 11:46:36 vtl vtltape[24687]: CDB (13715) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13715)
May  5 11:46:36 vtl vtltape[24687]: CDB (13716) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13716)
May  5 11:46:36 vtl vtltape[24687]: CDB (13717) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24687]: spc_inquiry(): INQUIRY ** (13717)
May  5 11:46:36 vtl vtltape[24688]: main(): Successfully started daemon: PID 24694
May  5 11:46:36 vtl vtltape[24694]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:9:5]
May  5 11:46:36 vtl vtltape[24694]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24694]: main(): Cleaning up after add_lu child pid: 24691
May  5 11:46:36 vtl vtltape[24694]: CDB (13713) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13713)
May  5 11:46:36 vtl vtltape[24694]: CDB (13718) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13718)
May  5 11:46:36 vtl vtltape[24691]: add_lu(): Child anounces 'lu [0:9:5] created'.
May  5 11:46:36 vtl kernel: scsi 4:0:9:5: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:9:5: Attached scsi tape st34
May  5 11:46:36 vtl kernel: st 4:0:9:5: st34: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:9:5: Attached scsi generic sg40 type 1
May  5 11:46:36 vtl vtltape[24695]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24695]: init_lu(): Adding default vers info: 0105
May  5 11:46:36 vtl vtltape[24694]: CDB (13719) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13719)
May  5 11:46:36 vtl vtltape[24694]: CDB (13720) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13720)
May  5 11:46:36 vtl vtltape[24694]: CDB (13721) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13721)
May  5 11:46:36 vtl vtltape[24694]: CDB (13722) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13722)
May  5 11:46:36 vtl vtltape[24694]: CDB (13723) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13723)
May  5 11:46:36 vtl vtltape[24694]: CDB (13724) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13724)
May  5 11:46:36 vtl vtltape[24695]: add_lu(): Child PID 24698 starting logical unit [0:9:6]
May  5 11:46:36 vtl vtltape[24694]: CDB (13725) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13725)
May  5 11:46:36 vtl vtltape[24694]: CDB (13727) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24694]: spc_inquiry(): INQUIRY ** (13727)
May  5 11:46:36 vtl vtltape[24695]: main(): Successfully started daemon: PID 24701
May  5 11:46:36 vtl vtltape[24701]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [0:9:6]
May  5 11:46:36 vtl vtltape[24701]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24701]: main(): Cleaning up after add_lu child pid: 24698
May  5 11:46:36 vtl vtltape[24701]: CDB (13726) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13726)
May  5 11:46:36 vtl vtltape[24701]: CDB (13728) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13728)
May  5 11:46:36 vtl vtltape[24698]: add_lu(): Child anounces 'lu [0:9:6] created'.
May  5 11:46:36 vtl kernel: scsi 4:0:9:6: Sequential-Access HP       Ultrium 4-SCSI   0105 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:0:9:6: Attached scsi tape st35
May  5 11:46:36 vtl kernel: st 4:0:9:6: st35: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:0:9:6: Attached scsi generic sg41 type 1
May  5 11:46:36 vtl vtltape[24702]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24701]: CDB (13729) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13729)
May  5 11:46:36 vtl vtltape[24701]: CDB (13730) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13730)
May  5 11:46:36 vtl vtltape[24702]: add_lu(): Child PID 24705 starting logical unit [4:0:1]
May  5 11:46:36 vtl vtltape[24701]: CDB (13731) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13731)
May  5 11:46:36 vtl vtltape[24701]: CDB (13733) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13733)
May  5 11:46:36 vtl vtltape[24701]: CDB (13734) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13734)
May  5 11:46:36 vtl vtltape[24701]: CDB (13735) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13735)
May  5 11:46:36 vtl vtltape[24701]: CDB (13736) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13736)
May  5 11:46:36 vtl vtltape[24701]: CDB (13737) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24701]: spc_inquiry(): INQUIRY ** (13737)
May  5 11:46:36 vtl vtltape[24702]: main(): Successfully started daemon: PID 24708
May  5 11:46:36 vtl vtltape[24708]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [4:0:1]
May  5 11:46:36 vtl vtltape[24708]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24708]: main(): Cleaning up after add_lu child pid: 24705
May  5 11:46:36 vtl vtltape[24708]: CDB (13732) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13732)
May  5 11:46:36 vtl vtltape[24708]: CDB (13738) (delay 5): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13738)
May  5 11:46:36 vtl kernel: scsi 4:4:0:1: Sequential-Access HP       Ultrium 4-SCSI   H37Z PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:4:0:1: Attached scsi tape st36
May  5 11:46:36 vtl kernel: st 4:4:0:1: st36: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:4:0:1: Attached scsi generic sg42 type 1
May  5 11:46:36 vtl vtltape[24705]: add_lu(): Child anounces 'lu [4:0:1] created'.
May  5 11:46:36 vtl vtltape[24709]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24708]: CDB (13739) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13739)
May  5 11:46:36 vtl vtltape[24708]: CDB (13740) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13740)
May  5 11:46:36 vtl vtltape[24708]: CDB (13741) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13741)
May  5 11:46:36 vtl vtltape[24708]: CDB (13742) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13742)
May  5 11:46:36 vtl vtltape[24708]: CDB (13743) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13743)
May  5 11:46:36 vtl vtltape[24708]: CDB (13744) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13744)
May  5 11:46:36 vtl vtltape[24708]: CDB (13745) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13745)
May  5 11:46:36 vtl vtltape[24708]: CDB (13746) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24708]: spc_inquiry(): INQUIRY ** (13746)
May  5 11:46:36 vtl vtltape[24709]: add_lu(): Child PID 24712 starting logical unit [4:0:2]
May  5 11:46:36 vtl vtltape[24709]: main(): Successfully started daemon: PID 24715
May  5 11:46:36 vtl vtltape[24715]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [4:0:2]
May  5 11:46:36 vtl vtltape[24715]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24715]: main(): Cleaning up after add_lu child pid: 24712
May  5 11:46:36 vtl vtltape[24715]: CDB (13747) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13747)
May  5 11:46:36 vtl vtltape[24715]: CDB (13748) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13748)
May  5 11:46:36 vtl vtltape[24716]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24716]: add_lu(): Child PID 24718 starting logical unit [4:0:3]
May  5 11:46:36 vtl kernel: scsi 4:4:0:2: Sequential-Access HP       Ultrium 4-SCSI   H37Z PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:4:0:2: Attached scsi tape st37
May  5 11:46:36 vtl kernel: st 4:4:0:2: st37: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:4:0:2: Attached scsi generic sg43 type 1
May  5 11:46:36 vtl vtltape[24712]: add_lu(): Child anounces 'lu [4:0:2] created'.
May  5 11:46:36 vtl vtltape[24715]: CDB (13750) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13750)
May  5 11:46:36 vtl vtltape[24715]: CDB (13751) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13751)
May  5 11:46:36 vtl vtltape[24715]: CDB (13752) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13752)
May  5 11:46:36 vtl vtltape[24715]: CDB (13753) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13753)
May  5 11:46:36 vtl vtltape[24715]: CDB (13754) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13754)
May  5 11:46:36 vtl vtltape[24715]: CDB (13755) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13755)
May  5 11:46:36 vtl vtltape[24715]: CDB (13756) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13756)
May  5 11:46:36 vtl vtltape[24715]: CDB (13757) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24715]: spc_inquiry(): INQUIRY ** (13757)
May  5 11:46:36 vtl vtltape[24716]: main(): Successfully started daemon: PID 24723
May  5 11:46:36 vtl vtltape[24723]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [4:0:3]
May  5 11:46:36 vtl vtltape[24723]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24723]: main(): Cleaning up after add_lu child pid: 24718
May  5 11:46:36 vtl vtltape[24723]: CDB (13749) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13749)
May  5 11:46:36 vtl vtltape[24723]: CDB (13758) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13758)
May  5 11:46:36 vtl kernel: scsi 4:4:0:3: Sequential-Access HP       Ultrium 4-SCSI   H37Z PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:4:0:3: Attached scsi tape st38
May  5 11:46:36 vtl kernel: st 4:4:0:3: st38: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:4:0:3: Attached scsi generic sg44 type 1
May  5 11:46:36 vtl vtltape[24718]: add_lu(): Child anounces 'lu [4:0:3] created'.
May  5 11:46:36 vtl vtltape[24724]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24724]: add_lu(): Child PID 24727 starting logical unit [4:0:4]
May  5 11:46:36 vtl vtltape[24723]: CDB (13759) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13759)
May  5 11:46:36 vtl vtltape[24723]: CDB (13761) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13761)
May  5 11:46:36 vtl vtltape[24723]: CDB (13762) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13762)
May  5 11:46:36 vtl vtltape[24723]: CDB (13763) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13763)
May  5 11:46:36 vtl vtltape[24723]: CDB (13764) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13764)
May  5 11:46:36 vtl vtltape[24723]: CDB (13765) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13765)
May  5 11:46:36 vtl vtltape[24723]: CDB (13766) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13766)
May  5 11:46:36 vtl vtltape[24723]: CDB (13767) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24723]: spc_inquiry(): INQUIRY ** (13767)
May  5 11:46:36 vtl vtltape[24724]: main(): Successfully started daemon: PID 24730
May  5 11:46:36 vtl vtltape[24730]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [4:0:4]
May  5 11:46:36 vtl vtltape[24730]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24730]: main(): Cleaning up after add_lu child pid: 24727
May  5 11:46:36 vtl vtltape[24730]: CDB (13760) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13760)
May  5 11:46:36 vtl vtltape[24730]: CDB (13768) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13768)
May  5 11:46:36 vtl kernel: scsi 4:4:0:4: Sequential-Access HP       Ultrium 4-SCSI   H37Z PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:4:0:4: Attached scsi tape st39
May  5 11:46:36 vtl kernel: st 4:4:0:4: st39: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:4:0:4: Attached scsi generic sg45 type 1
May  5 11:46:36 vtl vtltape[24727]: add_lu(): Child anounces 'lu [4:0:4] created'.
May  5 11:46:36 vtl vtltape[24731]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24730]: CDB (13769) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13769)
May  5 11:46:36 vtl vtltape[24730]: CDB (13770) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13770)
May  5 11:46:36 vtl vtltape[24730]: CDB (13771) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13771)
May  5 11:46:36 vtl vtltape[24730]: CDB (13772) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13772)
May  5 11:46:36 vtl vtltape[24730]: CDB (13773) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13773)
May  5 11:46:36 vtl vtltape[24730]: CDB (13774) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13774)
May  5 11:46:36 vtl vtltape[24730]: CDB (13775) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13775)
May  5 11:46:36 vtl vtltape[24731]: add_lu(): Child PID 24734 starting logical unit [5:0:1]
May  5 11:46:36 vtl vtltape[24730]: CDB (13776) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24730]: spc_inquiry(): INQUIRY ** (13776)
May  5 11:46:36 vtl vtltape[24731]: main(): Successfully started daemon: PID 24737
May  5 11:46:36 vtl vtltape[24737]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [5:0:1]
May  5 11:46:36 vtl vtltape[24737]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24737]: main(): Cleaning up after add_lu child pid: 24734
May  5 11:46:36 vtl vtltape[24737]: CDB (13777) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13777)
May  5 11:46:36 vtl vtltape[24737]: CDB (13778) (delay 5): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13778)
May  5 11:46:36 vtl vtltape[24734]: add_lu(): Child anounces 'lu [5:0:1] created'.
May  5 11:46:36 vtl kernel: scsi 4:5:0:1: Sequential-Access IBM      ULT3580-TD2      4AP0 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:5:0:1: Attached scsi tape st40
May  5 11:46:36 vtl kernel: st 4:5:0:1: st40: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:5:0:1: Attached scsi generic sg46 type 1
May  5 11:46:36 vtl vtltape[24737]: CDB (13779) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13779)
May  5 11:46:36 vtl vtltape[24737]: CDB (13780) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13780)
May  5 11:46:36 vtl vtltape[24738]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24737]: CDB (13781) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13781)
May  5 11:46:36 vtl vtltape[24737]: CDB (13782) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13782)
May  5 11:46:36 vtl vtltape[24737]: CDB (13783) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13783)
May  5 11:46:36 vtl vtltape[24738]: add_lu(): Child PID 24741 starting logical unit [5:0:2]
May  5 11:46:36 vtl vtltape[24737]: CDB (13784) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13784)
May  5 11:46:36 vtl vtltape[24737]: CDB (13786) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13786)
May  5 11:46:36 vtl vtltape[24737]: CDB (13787) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24737]: spc_inquiry(): INQUIRY ** (13787)
May  5 11:46:36 vtl vtltape[24738]: main(): Successfully started daemon: PID 24744
May  5 11:46:36 vtl vtltape[24744]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [5:0:2]
May  5 11:46:36 vtl vtltape[24744]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24744]: main(): Cleaning up after add_lu child pid: 24741
May  5 11:46:36 vtl vtltape[24744]: CDB (13785) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13785)
May  5 11:46:36 vtl vtltape[24744]: CDB (13788) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13788)
May  5 11:46:36 vtl kernel: scsi 4:5:0:2: Sequential-Access IBM      ULT3580-TD2      4AP0 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:5:0:2: Attached scsi tape st41
May  5 11:46:36 vtl kernel: st 4:5:0:2: st41: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:5:0:2: Attached scsi generic sg47 type 1
May  5 11:46:36 vtl vtltape[24741]: add_lu(): Child anounces 'lu [5:0:2] created'.
May  5 11:46:36 vtl vtltape[24745]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24744]: CDB (13789) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13789)
May  5 11:46:36 vtl vtltape[24744]: CDB (13790) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13790)
May  5 11:46:36 vtl vtltape[24744]: CDB (13791) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13791)
May  5 11:46:36 vtl vtltape[24745]: add_lu(): Child PID 24748 starting logical unit [5:0:3]
May  5 11:46:36 vtl vtltape[24744]: CDB (13792) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13792)
May  5 11:46:36 vtl vtltape[24744]: CDB (13793) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13793)
May  5 11:46:36 vtl vtltape[24744]: CDB (13794) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13794)
May  5 11:46:36 vtl vtltape[24744]: CDB (13796) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13796)
May  5 11:46:36 vtl vtltape[24744]: CDB (13797) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24744]: spc_inquiry(): INQUIRY ** (13797)
May  5 11:46:36 vtl vtltape[24745]: main(): Successfully started daemon: PID 24751
May  5 11:46:36 vtl vtltape[24751]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [5:0:3]
May  5 11:46:36 vtl vtltape[24751]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24751]: main(): Cleaning up after add_lu child pid: 24748
May  5 11:46:36 vtl vtltape[24751]: CDB (13795) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13795)
May  5 11:46:36 vtl vtltape[24751]: CDB (13798) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13798)
May  5 11:46:36 vtl vtltape[24748]: add_lu(): Child anounces 'lu [5:0:3] created'.
May  5 11:46:36 vtl vtltape[24752]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl kernel: scsi 4:5:0:3: Sequential-Access IBM      ULT3580-TD2      4AP0 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:5:0:3: Attached scsi tape st42
May  5 11:46:36 vtl kernel: st 4:5:0:3: st42: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:5:0:3: Attached scsi generic sg48 type 1
May  5 11:46:36 vtl vtltape[24752]: add_lu(): Child PID 24755 starting logical unit [5:0:4]
May  5 11:46:36 vtl vtltape[24751]: CDB (13800) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13800)
May  5 11:46:36 vtl vtltape[24751]: CDB (13801) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13801)
May  5 11:46:36 vtl vtltape[24751]: CDB (13802) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13802)
May  5 11:46:36 vtl vtltape[24751]: CDB (13803) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13803)
May  5 11:46:36 vtl vtltape[24751]: CDB (13804) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13804)
May  5 11:46:36 vtl vtltape[24751]: CDB (13805) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13805)
May  5 11:46:36 vtl vtltape[24751]: CDB (13806) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13806)
May  5 11:46:36 vtl vtltape[24751]: CDB (13807) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24751]: spc_inquiry(): INQUIRY ** (13807)
May  5 11:46:36 vtl vtltape[24752]: main(): Successfully started daemon: PID 24758
May  5 11:46:36 vtl vtltape[24758]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [5:0:4]
May  5 11:46:36 vtl vtltape[24758]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24758]: main(): Cleaning up after add_lu child pid: 24755
May  5 11:46:36 vtl vtltape[24758]: CDB (13799) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13799)
May  5 11:46:36 vtl vtltape[24758]: CDB (13808) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13808)
May  5 11:46:36 vtl kernel: scsi 4:5:0:4: Sequential-Access IBM      ULT3580-TD2      4AP0 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:5:0:4: Attached scsi tape st43
May  5 11:46:36 vtl kernel: st 4:5:0:4: st43: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:5:0:4: Attached scsi generic sg49 type 1
May  5 11:46:36 vtl vtltape[24755]: add_lu(): Child anounces 'lu [5:0:4] created'.
May  5 11:46:36 vtl vtltape[24758]: CDB (13809) (delay 405): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13809)
May  5 11:46:36 vtl vtltape[24758]: CDB (13810) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13810)
May  5 11:46:36 vtl vtltape[24758]: CDB (13811) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13811)
May  5 11:46:36 vtl vtltape[24758]: CDB (13812) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13812)
May  5 11:46:36 vtl vtltape[24758]: CDB (13813) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13813)
May  5 11:46:36 vtl vtltape[24758]: CDB (13814) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13814)
May  5 11:46:36 vtl vtltape[24758]: CDB (13815) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13815)
May  5 11:46:36 vtl vtltape[24759]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24758]: CDB (13816) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24758]: spc_inquiry(): INQUIRY ** (13816)
May  5 11:46:36 vtl vtltape[24759]: add_lu(): Child PID 24764 starting logical unit [5:3:1]
May  5 11:46:36 vtl vtltape[24759]: main(): Successfully started daemon: PID 24765
May  5 11:46:36 vtl vtltape[24765]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [5:3:1]
May  5 11:46:36 vtl vtltape[24765]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24765]: main(): Cleaning up after add_lu child pid: 24764
May  5 11:46:36 vtl vtltape[24765]: CDB (13817) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13817)
May  5 11:46:36 vtl vtltape[24765]: CDB (13818) (delay 405): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13818)
May  5 11:46:36 vtl kernel: scsi 4:5:3:1: Sequential-Access HP       Ultrium 3-SCSI   H22S PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:5:3:1: Attached scsi tape st44
May  5 11:46:36 vtl kernel: st 4:5:3:1: st44: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:5:3:1: Attached scsi generic sg50 type 1
May  5 11:46:36 vtl vtltape[24764]: add_lu(): Child anounces 'lu [5:3:1] created'.
May  5 11:46:36 vtl vtltape[24766]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24766]: add_lu(): Child PID 24767 starting logical unit [5:3:2]
May  5 11:46:36 vtl vtltape[24766]: main(): Successfully started daemon: PID 24768
May  5 11:46:36 vtl vtltape[24768]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [5:3:2]
May  5 11:46:36 vtl vtltape[24768]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24768]: main(): Cleaning up after add_lu child pid: 24767
May  5 11:46:36 vtl vtltape[24768]: CDB (13819) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13819)
May  5 11:46:36 vtl vtltape[24768]: CDB (13820) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13820)
May  5 11:46:36 vtl vtltape[24767]: add_lu(): Child anounces 'lu [5:3:2] created'.
May  5 11:46:36 vtl kernel: scsi 4:5:3:2: Sequential-Access HP       Ultrium 3-SCSI   H22S PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:5:3:2: Attached scsi tape st45
May  5 11:46:36 vtl kernel: st 4:5:3:2: st45: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:5:3:2: Attached scsi generic sg51 type 1
May  5 11:46:36 vtl vtltape[24769]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24769]: add_lu(): Child PID 24772 starting logical unit [5:3:3]
May  5 11:46:36 vtl vtltape[24768]: CDB (13821) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13821)
May  5 11:46:36 vtl vtltape[24768]: CDB (13822) (delay 405): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13822)
May  5 11:46:36 vtl vtltape[24768]: CDB (13823) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13823)
May  5 11:46:36 vtl vtltape[24768]: CDB (13825) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13825)
May  5 11:46:36 vtl vtltape[24768]: CDB (13826) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13826)
May  5 11:46:36 vtl vtltape[24768]: CDB (13827) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13827)
May  5 11:46:36 vtl vtltape[24768]: CDB (13828) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13828)
May  5 11:46:36 vtl vtltape[24768]: CDB (13829) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24768]: spc_inquiry(): INQUIRY ** (13829)
May  5 11:46:36 vtl vtltape[24765]: CDB (13830) (delay 4005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13830)
May  5 11:46:36 vtl vtltape[24765]: CDB (13831) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13831)
May  5 11:46:36 vtl vtltape[24765]: CDB (13832) (delay 1605): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13832)
May  5 11:46:36 vtl vtltape[24765]: CDB (13833) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13833)
May  5 11:46:36 vtl vtltape[24765]: CDB (13834) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13834)
May  5 11:46:36 vtl vtltape[24765]: CDB (13835) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13835)
May  5 11:46:36 vtl vtltape[24765]: CDB (13836) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13836)
May  5 11:46:36 vtl vtltape[24765]: CDB (13837) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24765]: spc_inquiry(): INQUIRY ** (13837)
May  5 11:46:36 vtl vtltape[24769]: main(): Successfully started daemon: PID 24777
May  5 11:46:36 vtl vtltape[24777]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [5:3:3]
May  5 11:46:36 vtl vtltape[24777]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24777]: main(): Cleaning up after add_lu child pid: 24772
May  5 11:46:36 vtl vtltape[24777]: CDB (13824) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13824)
May  5 11:46:36 vtl vtltape[24778]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24777]: CDB (13838) (delay 805): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13838)
May  5 11:46:36 vtl kernel: scsi 4:5:3:3: Sequential-Access HP       Ultrium 3-SCSI   H22S PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:5:3:3: Attached scsi tape st46
May  5 11:46:36 vtl kernel: st 4:5:3:3: st46: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:5:3:3: Attached scsi generic sg52 type 1
May  5 11:46:36 vtl vtltape[24772]: add_lu(): Child anounces 'lu [5:3:3] created'.
May  5 11:46:36 vtl vtltape[24778]: add_lu(): Child PID 24781 starting logical unit [5:3:4]
May  5 11:46:36 vtl vtltape[24777]: CDB (13840) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13840)
May  5 11:46:36 vtl vtltape[24777]: CDB (13841) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13841)
May  5 11:46:36 vtl vtltape[24777]: CDB (13842) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13842)
May  5 11:46:36 vtl vtltape[24777]: CDB (13843) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13843)
May  5 11:46:36 vtl vtltape[24777]: CDB (13844) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13844)
May  5 11:46:36 vtl vtltape[24777]: CDB (13845) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13845)
May  5 11:46:36 vtl vtltape[24777]: CDB (13846) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13846)
May  5 11:46:36 vtl vtltape[24777]: CDB (13847) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24777]: spc_inquiry(): INQUIRY ** (13847)
May  5 11:46:36 vtl vtltape[24778]: main(): Successfully started daemon: PID 24786
May  5 11:46:36 vtl vtltape[24786]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [5:3:4]
May  5 11:46:36 vtl vtltape[24786]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24786]: main(): Cleaning up after add_lu child pid: 24781
May  5 11:46:36 vtl vtltape[24786]: CDB (13839) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13839)
May  5 11:46:36 vtl vtltape[24787]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24786]: CDB (13848) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13848)
May  5 11:46:36 vtl vtltape[24787]: add_lu(): Child PID 24788 starting logical unit [8:0:1]
May  5 11:46:36 vtl kernel: scsi 4:5:3:4: Sequential-Access HP       Ultrium 3-SCSI   H22S PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:5:3:4: Attached scsi tape st47
May  5 11:46:36 vtl kernel: st 4:5:3:4: st47: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl vtltape[24781]: add_lu(): Child anounces 'lu [5:3:4] created'.
May  5 11:46:36 vtl kernel: st 4:5:3:4: Attached scsi generic sg53 type 1
May  5 11:46:36 vtl vtltape[24787]: main(): Successfully started daemon: PID 24789
May  5 11:46:36 vtl vtltape[24789]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [8:0:1]
May  5 11:46:36 vtl vtltape[24789]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24789]: main(): Cleaning up after add_lu child pid: 24788
May  5 11:46:36 vtl vtltape[24789]: CDB (13849) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13849)
May  5 11:46:36 vtl vtltape[24789]: CDB (13850) (delay 5): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13850)
May  5 11:46:36 vtl vtltape[24788]: add_lu(): Child anounces 'lu [8:0:1] created'.
May  5 11:46:36 vtl kernel: scsi 4:8:0:1: Sequential-Access IBM      ULT3580-TD2      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:8:0:1: Attached scsi tape st48
May  5 11:46:36 vtl kernel: st 4:8:0:1: st48: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:8:0:1: Attached scsi generic sg54 type 1
May  5 11:46:36 vtl vtltape[24790]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24790]: add_lu(): Child PID 24791 starting logical unit [8:0:2]
May  5 11:46:36 vtl vtltape[24789]: CDB (13851) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13851)
May  5 11:46:36 vtl vtltape[24789]: CDB (13853) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13853)
May  5 11:46:36 vtl vtltape[24789]: CDB (13854) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13854)
May  5 11:46:36 vtl vtltape[24789]: CDB (13855) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13855)
May  5 11:46:36 vtl vtltape[24789]: CDB (13856) (delay 805): 12 01 80 00 fe 00
May  5 11:46:36 vtl kernel: scsi 4:8:0:2: Sequential-Access IBM      ULT3580-TD2      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13856)
May  5 11:46:36 vtl vtltape[24789]: CDB (13857) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13857)
May  5 11:46:36 vtl vtltape[24790]: main(): Successfully started daemon: PID 24796
May  5 11:46:36 vtl vtltape[24796]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [8:0:2]
May  5 11:46:36 vtl vtltape[24796]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24796]: main(): Cleaning up after add_lu child pid: 24791
May  5 11:46:36 vtl vtltape[24796]: CDB (13852) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13852)
May  5 11:46:36 vtl vtltape[24796]: CDB (13858) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl kernel: st 4:8:0:2: Attached scsi tape st49
May  5 11:46:36 vtl kernel: st 4:8:0:2: st49: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:8:0:2: Attached scsi generic sg55 type 1
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13858)
May  5 11:46:36 vtl vtltape[24791]: add_lu(): Child anounces 'lu [8:0:2] created'.
May  5 11:46:36 vtl vtltape[24789]: CDB (13859) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13859)
May  5 11:46:36 vtl vtltape[24789]: CDB (13860) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24789]: spc_inquiry(): INQUIRY ** (13860)
May  5 11:46:36 vtl vtltape[24786]: CDB (13861) (delay 4805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13861)
May  5 11:46:36 vtl vtltape[24796]: CDB (13862) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13862)
May  5 11:46:36 vtl vtltape[24796]: CDB (13863) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13863)
May  5 11:46:36 vtl vtltape[24796]: CDB (13866) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13866)
May  5 11:46:36 vtl vtltape[24796]: CDB (13867) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13867)
May  5 11:46:36 vtl vtltape[24786]: CDB (13864) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13864)
May  5 11:46:36 vtl vtltape[24786]: CDB (13865) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13865)
May  5 11:46:36 vtl vtltape[24796]: CDB (13868) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24786]: CDB (13870) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13868)
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13870)
May  5 11:46:36 vtl vtltape[24796]: CDB (13869) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13869)
May  5 11:46:36 vtl vtltape[24786]: CDB (13871) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24796]: CDB (13873) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13871)
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13873)
May  5 11:46:36 vtl vtltape[24786]: CDB (13872) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24796]: CDB (13874) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13872)
May  5 11:46:36 vtl vtltape[24786]: CDB (13875) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24796]: spc_inquiry(): INQUIRY ** (13874)
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13875)
May  5 11:46:36 vtl vtltape[24797]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24786]: CDB (13876) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24786]: spc_inquiry(): INQUIRY ** (13876)
May  5 11:46:36 vtl vtltape[24797]: add_lu(): Child PID 24806 starting logical unit [8:0:3]
May  5 11:46:36 vtl vtltape[24797]: main(): Successfully started daemon: PID 24807
May  5 11:46:36 vtl vtltape[24807]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [8:0:3]
May  5 11:46:36 vtl vtltape[24807]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24807]: main(): Cleaning up after add_lu child pid: 24806
May  5 11:46:36 vtl vtltape[24807]: CDB (13877) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13877)
May  5 11:46:36 vtl vtltape[24807]: CDB (13878) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13878)
May  5 11:46:36 vtl kernel: scsi 4:8:0:3: Sequential-Access IBM      ULT3580-TD2      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24808]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24808]: add_lu(): Child PID 24809 starting logical unit [8:0:4]
May  5 11:46:36 vtl vtltape[24806]: add_lu(): Child anounces 'lu [8:0:3] created'.
May  5 11:46:36 vtl kernel: st 4:8:0:3: Attached scsi tape st50
May  5 11:46:36 vtl kernel: st 4:8:0:3: st50: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:8:0:3: Attached scsi generic sg56 type 1
May  5 11:46:36 vtl vtltape[24808]: main(): Successfully started daemon: PID 24810
May  5 11:46:36 vtl vtltape[24810]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [8:0:4]
May  5 11:46:36 vtl vtltape[24810]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24810]: main(): Cleaning up after add_lu child pid: 24809
May  5 11:46:36 vtl vtltape[24810]: CDB (13879) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13879)
May  5 11:46:36 vtl vtltape[24810]: CDB (13880) (delay 5): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13880)
May  5 11:46:36 vtl kernel: scsi 4:8:0:4: Sequential-Access IBM      ULT3580-TD2      252D PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:8:0:4: Attached scsi tape st51
May  5 11:46:36 vtl kernel: st 4:8:0:4: st51: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:8:0:4: Attached scsi generic sg57 type 1
May  5 11:46:36 vtl vtltape[24809]: add_lu(): Child anounces 'lu [8:0:4] created'.
May  5 11:46:36 vtl vtltape[24810]: CDB (13881) (delay 805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13881)
May  5 11:46:36 vtl vtltape[24811]: init_lu(): NAA: Incorrect params  NAA: 140:11:22:33:ab:9:00:01 : using defaults
May  5 11:46:36 vtl vtltape[24810]: CDB (13882) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13882)
May  5 11:46:36 vtl vtltape[24811]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24810]: CDB (13883) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13883)
May  5 11:46:36 vtl vtltape[24810]: CDB (13884) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13884)
May  5 11:46:36 vtl vtltape[24810]: CDB (13885) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13885)
May  5 11:46:36 vtl vtltape[24811]: add_lu(): Child PID 24814 starting logical unit [9:0:1]
May  5 11:46:36 vtl vtltape[24810]: CDB (13886) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13886)
May  5 11:46:36 vtl vtltape[24810]: CDB (13887) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13887)
May  5 11:46:36 vtl vtltape[24810]: CDB (13889) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24810]: spc_inquiry(): INQUIRY ** (13889)
May  5 11:46:36 vtl vtltape[24811]: main(): Successfully started daemon: PID 24819
May  5 11:46:36 vtl vtltape[24819]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [9:0:1]
May  5 11:46:36 vtl vtltape[24819]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24819]: main(): Cleaning up after add_lu child pid: 24814
May  5 11:46:36 vtl vtltape[24819]: CDB (13888) (delay 50000): 12 20 00 00 24 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13888)
May  5 11:46:36 vtl vtltape[24819]: CDB (13892) (delay 405): 12 20 00 00 40 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13892)
May  5 11:46:36 vtl kernel: scsi 4:9:0:1: Sequential-Access HP       Ultrium 3-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:9:0:1: Attached scsi tape st52
May  5 11:46:36 vtl kernel: st 4:9:0:1: st52: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:9:0:1: Attached scsi generic sg58 type 1
May  5 11:46:36 vtl vtltape[24807]: CDB (13890) (delay 4405): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13890)
May  5 11:46:36 vtl vtltape[24807]: CDB (13891) (delay 5): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13891)
May  5 11:46:36 vtl vtltape[24814]: add_lu(): Child anounces 'lu [9:0:1] created'.
May  5 11:46:36 vtl vtltape[24820]: init_lu(): NAA: Incorrect params  NAA: 140:11:22:33:ab:9:00:2 : using defaults
May  5 11:46:36 vtl vtltape[24820]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24807]: CDB (13893) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13893)
May  5 11:46:36 vtl vtltape[24807]: CDB (13894) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13894)
May  5 11:46:36 vtl vtltape[24807]: CDB (13895) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13895)
May  5 11:46:36 vtl vtltape[24820]: add_lu(): Child PID 24821 starting logical unit [9:0:2]
May  5 11:46:36 vtl vtltape[24807]: CDB (13896) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13896)
May  5 11:46:36 vtl vtltape[24807]: CDB (13897) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13897)
May  5 11:46:36 vtl vtltape[24807]: CDB (13899) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24807]: spc_inquiry(): INQUIRY ** (13899)
May  5 11:46:36 vtl vtltape[24820]: main(): Successfully started daemon: PID 24824
May  5 11:46:36 vtl vtltape[24824]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [9:0:2]
May  5 11:46:36 vtl vtltape[24824]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24824]: main(): Cleaning up after add_lu child pid: 24821
May  5 11:46:36 vtl vtltape[24824]: CDB (13898) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13898)
May  5 11:46:36 vtl vtltape[24824]: CDB (13900) (delay 805): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13900)
May  5 11:46:36 vtl vtltape[24821]: add_lu(): Child anounces 'lu [9:0:2] created'.
May  5 11:46:36 vtl kernel: scsi 4:9:0:2: Sequential-Access HP       Ultrium 3-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:36 vtl kernel: st 4:9:0:2: Attached scsi tape st53
May  5 11:46:36 vtl kernel: st 4:9:0:2: st53: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:9:0:2: Attached scsi generic sg59 type 1
May  5 11:46:36 vtl vtltape[24826]: init_lu(): NAA: Incorrect params  NAA: 140:11:22:33:ab:9:00:3 : using defaults
May  5 11:46:36 vtl vtltape[24826]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24819]: CDB (13901) (delay 2805): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13901)
May  5 11:46:36 vtl vtltape[24819]: CDB (13902) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13902)
May  5 11:46:36 vtl vtltape[24819]: CDB (13903) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13903)
May  5 11:46:36 vtl vtltape[24819]: CDB (13904) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13904)
May  5 11:46:36 vtl vtltape[24824]: CDB (13905) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13905)
May  5 11:46:36 vtl vtltape[24826]: add_lu(): Child PID 24831 starting logical unit [9:0:3]
May  5 11:46:36 vtl vtltape[24824]: CDB (13906) (delay 405): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13906)
May  5 11:46:36 vtl vtltape[24824]: CDB (13907) (delay 405): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24819]: CDB (13909) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13909)
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13907)
May  5 11:46:36 vtl vtltape[24824]: CDB (13910) (delay 5): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13910)
May  5 11:46:36 vtl vtltape[24824]: CDB (13911) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13911)
May  5 11:46:36 vtl vtltape[24824]: CDB (13912) (delay 5): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13912)
May  5 11:46:36 vtl vtltape[24824]: CDB (13913) (delay 5): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13913)
May  5 11:46:36 vtl vtltape[24819]: CDB (13914) (delay 805): 12 01 00 00 fe 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13914)
May  5 11:46:36 vtl vtltape[24824]: CDB (13915) (delay 405): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24824]: spc_inquiry(): INQUIRY ** (13915)
May  5 11:46:36 vtl vtltape[24819]: CDB (13916) (delay 405): 12 01 80 00 fe 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13916)
May  5 11:46:36 vtl vtltape[24819]: CDB (13917) (delay 805): 12 01 83 00 fe 00
May  5 11:46:36 vtl vtltape[24819]: spc_inquiry(): INQUIRY ** (13917)
May  5 11:46:36 vtl vtltape[24826]: main(): Successfully started daemon: PID 24835
May  5 11:46:36 vtl vtltape[24835]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [9:0:3]
May  5 11:46:36 vtl vtltape[24835]: main(): Size of buffer is 2097152
May  5 11:46:36 vtl vtltape[24835]: main(): Cleaning up after add_lu child pid: 24831
May  5 11:46:36 vtl vtltape[24835]: CDB (13908) (delay 50000): 12 00 00 00 24 00
May  5 11:46:36 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13908)
May  5 11:46:36 vtl vtltape[24835]: CDB (13918) (delay 405): 12 00 00 00 40 00
May  5 11:46:36 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13918)
May  5 11:46:36 vtl kernel: scsi 4:9:0:3: Sequential-Access HP       Ultrium 3-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:36 vtl vtltape[24831]: add_lu(): Child anounces 'lu [9:0:3] created'.
May  5 11:46:36 vtl kernel: st 4:9:0:3: Attached scsi tape st54
May  5 11:46:36 vtl kernel: st 4:9:0:3: st54: try direct i/o: yes (alignment 4 B)
May  5 11:46:36 vtl kernel: st 4:9:0:3: Attached scsi generic sg60 type 1
May  5 11:46:36 vtl vtltape[24836]: init_lu(): NAA: Incorrect params  NAA: 140:11:22:33:ab:9:00:4 : using defaults
May  5 11:46:36 vtl vtltape[24836]: init_lu(): Backoff value: 400
May  5 11:46:36 vtl vtltape[24836]: add_lu(): Child PID 24839 starting logical unit [9:0:4]
May  5 11:46:37 vtl vtltape[24835]: CDB (13919) (delay 2405): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13919)
May  5 11:46:37 vtl vtltape[24835]: CDB (13920) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13920)
May  5 11:46:37 vtl vtltape[24835]: CDB (13922) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13922)
May  5 11:46:37 vtl vtltape[24835]: CDB (13923) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13923)
May  5 11:46:37 vtl vtltape[24835]: CDB (13924) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13924)
May  5 11:46:37 vtl vtltape[24835]: CDB (13925) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13925)
May  5 11:46:37 vtl vtltape[24835]: CDB (13926) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13926)
May  5 11:46:37 vtl vtltape[24835]: CDB (13927) (delay 805): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24835]: spc_inquiry(): INQUIRY ** (13927)
May  5 11:46:37 vtl vtltape[24836]: main(): Successfully started daemon: PID 24843
May  5 11:46:37 vtl vtltape[24843]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [9:0:4]
May  5 11:46:37 vtl vtltape[24843]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24843]: main(): Cleaning up after add_lu child pid: 24839
May  5 11:46:37 vtl vtltape[24843]: CDB (13921) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13921)
May  5 11:46:37 vtl vtltape[24843]: CDB (13928) (delay 5): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13928)
May  5 11:46:37 vtl kernel: scsi 4:9:0:4: Sequential-Access HP       Ultrium 3-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:9:0:4: Attached scsi tape st55
May  5 11:46:37 vtl kernel: st 4:9:0:4: st55: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:9:0:4: Attached scsi generic sg61 type 1
May  5 11:46:37 vtl vtltape[24839]: add_lu(): Child anounces 'lu [9:0:4] created'.
May  5 11:46:37 vtl vtltape[24843]: CDB (13929) (delay 805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13929)
May  5 11:46:37 vtl vtltape[24844]: init_lu(): NAA: Incorrect params  NAA: 140:11:22:33:ab:9:00:5 : using defaults
May  5 11:46:37 vtl vtltape[24843]: CDB (13930) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24844]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13930)
May  5 11:46:37 vtl vtltape[24843]: CDB (13931) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13931)
May  5 11:46:37 vtl vtltape[24843]: CDB (13932) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13932)
May  5 11:46:37 vtl vtltape[24843]: CDB (13933) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13933)
May  5 11:46:37 vtl vtltape[24844]: add_lu(): Child PID 24847 starting logical unit [9:0:5]
May  5 11:46:37 vtl vtltape[24843]: CDB (13934) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13934)
May  5 11:46:37 vtl vtltape[24843]: CDB (13935) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13935)
May  5 11:46:37 vtl vtltape[24843]: CDB (13937) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24843]: spc_inquiry(): INQUIRY ** (13937)
May  5 11:46:37 vtl vtltape[24844]: main(): Successfully started daemon: PID 24850
May  5 11:46:37 vtl vtltape[24850]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [9:0:5]
May  5 11:46:37 vtl vtltape[24850]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24850]: main(): Cleaning up after add_lu child pid: 24847
May  5 11:46:37 vtl vtltape[24850]: CDB (13936) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13936)
May  5 11:46:37 vtl vtltape[24850]: CDB (13938) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13938)
May  5 11:46:37 vtl kernel: scsi 4:9:0:5: Sequential-Access HP       Ultrium 3-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:37 vtl vtltape[24851]: init_lu(): NAA: Incorrect params  NAA: 140:11:22:33:ab:9:00:6 : using defaults
May  5 11:46:37 vtl vtltape[24851]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24847]: add_lu(): Child anounces 'lu [9:0:5] created'.
May  5 11:46:37 vtl kernel: st 4:9:0:5: Attached scsi tape st56
May  5 11:46:37 vtl kernel: st 4:9:0:5: st56: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:9:0:5: Attached scsi generic sg62 type 1
May  5 11:46:37 vtl vtltape[24851]: add_lu(): Child PID 24852 starting logical unit [9:0:6]
May  5 11:46:37 vtl vtltape[24853]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [9:0:6]
May  5 11:46:37 vtl vtltape[24851]: main(): Successfully started daemon: PID 24853
May  5 11:46:37 vtl vtltape[24853]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24853]: main(): Cleaning up after add_lu child pid: 24852
May  5 11:46:37 vtl vtltape[24853]: CDB (13939) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13939)
May  5 11:46:37 vtl vtltape[24853]: CDB (13940) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13940)
May  5 11:46:37 vtl kernel: scsi 4:9:0:6: Sequential-Access HP       Ultrium 3-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:9:0:6: Attached scsi tape st57
May  5 11:46:37 vtl vtltape[24854]: init_lu(): NAA: Incorrect params  NAA: 180:11:22:33:ab:11:00:01 : using defaults
May  5 11:46:37 vtl kernel: st 4:9:0:6: st57: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:9:0:6: Attached scsi generic sg63 type 1
May  5 11:46:37 vtl vtltape[24854]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24852]: add_lu(): Child anounces 'lu [9:0:6] created'.
May  5 11:46:37 vtl vtltape[24854]: add_lu(): Child PID 24855 starting logical unit [11:0:1]
May  5 11:46:37 vtl vtltape[24850]: CDB (13942) (delay 4005): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13942)
May  5 11:46:37 vtl vtltape[24850]: CDB (13943) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13943)
May  5 11:46:37 vtl vtltape[24850]: CDB (13944) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13944)
May  5 11:46:37 vtl vtltape[24850]: CDB (13945) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13945)
May  5 11:46:37 vtl vtltape[24850]: CDB (13946) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13946)
May  5 11:46:37 vtl vtltape[24850]: CDB (13947) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13947)
May  5 11:46:37 vtl vtltape[24850]: CDB (13948) (delay 805): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13948)
May  5 11:46:37 vtl vtltape[24850]: CDB (13949) (delay 805): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24850]: spc_inquiry(): INQUIRY ** (13949)
May  5 11:46:37 vtl vtltape[24854]: main(): Successfully started daemon: PID 24859
May  5 11:46:37 vtl vtltape[24859]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [11:0:1]
May  5 11:46:37 vtl vtltape[24859]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24859]: main(): Cleaning up after add_lu child pid: 24855
May  5 11:46:37 vtl vtltape[24859]: CDB (13941) (delay 50000): 12 20 00 00 24 00
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13941)
May  5 11:46:37 vtl vtltape[24859]: CDB (13950) (delay 405): 12 20 00 00 40 00
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13950)
May  5 11:46:37 vtl vtltape[24855]: add_lu(): Child anounces 'lu [11:0:1] created'.
May  5 11:46:37 vtl kernel: scsi 4:11:0:1: Sequential-Access HP       Ultrium 3-SCSI   N11G PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:11:0:1: Attached scsi tape st58
May  5 11:46:37 vtl kernel: st 4:11:0:1: st58: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:11:0:1: Attached scsi generic sg64 type 1
May  5 11:46:37 vtl vtltape[24861]: init_lu(): NAA: Incorrect params  NAA: 180:11:22:33:ab:11:00:2 : using defaults
May  5 11:46:37 vtl vtltape[24861]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24861]: add_lu(): Child PID 24862 starting logical unit [11:0:2]
May  5 11:46:37 vtl vtltape[24853]: CDB (13952) (delay 4405): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13952)
May  5 11:46:37 vtl vtltape[24853]: CDB (13953) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13953)
May  5 11:46:37 vtl vtltape[24853]: CDB (13954) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13954)
May  5 11:46:37 vtl vtltape[24853]: CDB (13955) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13955)
May  5 11:46:37 vtl vtltape[24853]: CDB (13956) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13956)
May  5 11:46:37 vtl vtltape[24853]: CDB (13957) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13957)
May  5 11:46:37 vtl vtltape[24853]: CDB (13958) (delay 805): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13958)
May  5 11:46:37 vtl vtltape[24853]: CDB (13959) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24853]: spc_inquiry(): INQUIRY ** (13959)
May  5 11:46:37 vtl vtltape[24861]: main(): Successfully started daemon: PID 24865
May  5 11:46:37 vtl vtltape[24865]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [11:0:2]
May  5 11:46:37 vtl vtltape[24865]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24865]: main(): Cleaning up after add_lu child pid: 24862
May  5 11:46:37 vtl vtltape[24865]: CDB (13951) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13951)
May  5 11:46:37 vtl vtltape[24865]: CDB (13960) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13960)
May  5 11:46:37 vtl kernel: scsi 4:11:0:2: Sequential-Access HP       Ultrium 3-SCSI   N11G PQ: 0 ANSI: 5
May  5 11:46:37 vtl vtltape[24862]: add_lu(): Child anounces 'lu [11:0:2] created'.
May  5 11:46:37 vtl vtltape[24868]: init_lu(): NAA: Incorrect params  NAA: 180:11:22:33:ab:11:00:3 : using defaults
May  5 11:46:37 vtl vtltape[24868]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl kernel: st 4:11:0:2: Attached scsi tape st59
May  5 11:46:37 vtl kernel: st 4:11:0:2: st59: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:11:0:2: Attached scsi generic sg65 type 1
May  5 11:46:37 vtl vtltape[24868]: add_lu(): Child PID 24870 starting logical unit [11:0:3]
May  5 11:46:37 vtl vtltape[24865]: CDB (13962) (delay 2405): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13962)
May  5 11:46:37 vtl vtltape[24865]: CDB (13963) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13963)
May  5 11:46:37 vtl vtltape[24859]: CDB (13964) (delay 4005): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13964)
May  5 11:46:37 vtl vtltape[24865]: CDB (13965) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13965)
May  5 11:46:37 vtl vtltape[24859]: CDB (13967) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13967)
May  5 11:46:37 vtl vtltape[24865]: CDB (13966) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13966)
May  5 11:46:37 vtl vtltape[24865]: CDB (13968) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13968)
May  5 11:46:37 vtl vtltape[24859]: CDB (13970) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24865]: CDB (13969) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13970)
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13969)
May  5 11:46:37 vtl vtltape[24865]: CDB (13972) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24859]: CDB (13971) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13972)
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13971)
May  5 11:46:37 vtl vtltape[24865]: CDB (13973) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24865]: spc_inquiry(): INQUIRY ** (13973)
May  5 11:46:37 vtl vtltape[24859]: CDB (13974) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13974)
May  5 11:46:37 vtl vtltape[24859]: CDB (13975) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13975)
May  5 11:46:37 vtl vtltape[24859]: CDB (13976) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13976)
May  5 11:46:37 vtl vtltape[24859]: CDB (13977) (delay 805): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24859]: spc_inquiry(): INQUIRY ** (13977)
May  5 11:46:37 vtl vtltape[24868]: main(): Successfully started daemon: PID 24879
May  5 11:46:37 vtl vtltape[24879]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [11:0:3]
May  5 11:46:37 vtl vtltape[24879]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24879]: main(): Cleaning up after add_lu child pid: 24870
May  5 11:46:37 vtl vtltape[24879]: CDB (13961) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13961)
May  5 11:46:37 vtl vtltape[24879]: CDB (13978) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13978)
May  5 11:46:37 vtl kernel: scsi 4:11:0:3: Sequential-Access HP       Ultrium 3-SCSI   N11G PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:11:0:3: Attached scsi tape st60
May  5 11:46:37 vtl kernel: st 4:11:0:3: st60: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:11:0:3: Attached scsi generic sg66 type 1
May  5 11:46:37 vtl vtltape[24870]: add_lu(): Child anounces 'lu [11:0:3] created'.
May  5 11:46:37 vtl vtltape[24880]: init_lu(): NAA: Incorrect params  NAA: 180:11:22:33:ab:11:00:4 : using defaults
May  5 11:46:37 vtl vtltape[24880]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24879]: CDB (13979) (delay 805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13979)
May  5 11:46:37 vtl vtltape[24879]: CDB (13980) (delay 405): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13980)
May  5 11:46:37 vtl vtltape[24879]: CDB (13981) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13981)
May  5 11:46:37 vtl vtltape[24880]: add_lu(): Child PID 24883 starting logical unit [11:0:4]
May  5 11:46:37 vtl vtltape[24879]: CDB (13982) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13982)
May  5 11:46:37 vtl vtltape[24879]: CDB (13984) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13984)
May  5 11:46:37 vtl vtltape[24879]: CDB (13985) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13985)
May  5 11:46:37 vtl vtltape[24879]: CDB (13986) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13986)
May  5 11:46:37 vtl vtltape[24879]: CDB (13987) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24879]: spc_inquiry(): INQUIRY ** (13987)
May  5 11:46:37 vtl vtltape[24880]: main(): Successfully started daemon: PID 24886
May  5 11:46:37 vtl vtltape[24886]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [11:0:4]
May  5 11:46:37 vtl vtltape[24886]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24886]: main(): Cleaning up after add_lu child pid: 24883
May  5 11:46:37 vtl vtltape[24886]: CDB (13983) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13983)
May  5 11:46:37 vtl vtltape[24886]: CDB (13988) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13988)
May  5 11:46:37 vtl vtltape[24883]: add_lu(): Child anounces 'lu [11:0:4] created'.
May  5 11:46:37 vtl kernel: scsi 4:11:0:4: Sequential-Access HP       Ultrium 3-SCSI   N11G PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:11:0:4: Attached scsi tape st61
May  5 11:46:37 vtl kernel: st 4:11:0:4: st61: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:11:0:4: Attached scsi generic sg67 type 1
May  5 11:46:37 vtl vtltape[24886]: CDB (13989) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13989)
May  5 11:46:37 vtl vtltape[24887]: init_lu(): NAA: Incorrect params  NAA: 200:11:22:33:ab:12:00:01 : using defaults
May  5 11:46:37 vtl vtltape[24886]: CDB (13990) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13990)
May  5 11:46:37 vtl vtltape[24887]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24886]: CDB (13991) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13991)
May  5 11:46:37 vtl vtltape[24886]: CDB (13992) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13992)
May  5 11:46:37 vtl vtltape[24886]: CDB (13993) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13993)
May  5 11:46:37 vtl vtltape[24886]: CDB (13994) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13994)
May  5 11:46:37 vtl vtltape[24886]: CDB (13995) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13995)
May  5 11:46:37 vtl vtltape[24886]: CDB (13996) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24886]: spc_inquiry(): INQUIRY ** (13996)
May  5 11:46:37 vtl vtltape[24887]: add_lu(): Child PID 24891 starting logical unit [12:0:1]
May  5 11:46:37 vtl vtltape[24887]: main(): Successfully started daemon: PID 24893
May  5 11:46:37 vtl vtltape[24893]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [12:0:1]
May  5 11:46:37 vtl vtltape[24893]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24893]: main(): Cleaning up after add_lu child pid: 24891
May  5 11:46:37 vtl vtltape[24893]: CDB (13997) (delay 50000): 12 20 00 00 24 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (13997)
May  5 11:46:37 vtl vtltape[24893]: CDB (13998) (delay 5): 12 20 00 00 40 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (13998)
May  5 11:46:37 vtl vtltape[24891]: add_lu(): Child anounces 'lu [12:0:1] created'.
May  5 11:46:37 vtl kernel: scsi 4:12:0:1: Sequential-Access IBM      ULT3580-TD5      252D PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:12:0:1: Attached scsi tape st62
May  5 11:46:37 vtl kernel: st 4:12:0:1: st62: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:12:0:1: Attached scsi generic sg68 type 1
May  5 11:46:37 vtl vtltape[24894]: init_lu(): NAA: Incorrect params  NAA: 200:11:22:33:ab:12:00:2 : using defaults
May  5 11:46:37 vtl vtltape[24894]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24893]: CDB (13999) (delay 805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (13999)
May  5 11:46:37 vtl vtltape[24893]: CDB (14000) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (14000)
May  5 11:46:37 vtl vtltape[24893]: CDB (14001) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (14001)
May  5 11:46:37 vtl vtltape[24893]: CDB (14002) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (14002)
May  5 11:46:37 vtl vtltape[24894]: add_lu(): Child PID 24897 starting logical unit [12:0:2]
May  5 11:46:37 vtl vtltape[24893]: CDB (14003) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (14003)
May  5 11:46:37 vtl vtltape[24893]: CDB (14004) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (14004)
May  5 11:46:37 vtl vtltape[24893]: CDB (14005) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (14005)
May  5 11:46:37 vtl vtltape[24893]: CDB (14006) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24893]: spc_inquiry(): INQUIRY ** (14006)
May  5 11:46:37 vtl vtltape[24894]: main(): Successfully started daemon: PID 24900
May  5 11:46:37 vtl vtltape[24900]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [12:0:2]
May  5 11:46:37 vtl vtltape[24900]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24900]: main(): Cleaning up after add_lu child pid: 24897
May  5 11:46:37 vtl vtltape[24900]: CDB (14007) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14007)
May  5 11:46:37 vtl vtltape[24900]: CDB (14008) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14008)
May  5 11:46:37 vtl kernel: scsi 4:12:0:2: Sequential-Access IBM      ULT3580-TD5      252D PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:12:0:2: Attached scsi tape st63
May  5 11:46:37 vtl kernel: st 4:12:0:2: st63: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl vtltape[24901]: init_lu(): NAA: Incorrect params  NAA: 200:11:22:33:ab:12:00:3 : using defaults
May  5 11:46:37 vtl vtltape[24901]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24897]: add_lu(): Child anounces 'lu [12:0:2] created'.
May  5 11:46:37 vtl kernel: st 4:12:0:2: Attached scsi generic sg69 type 1
May  5 11:46:37 vtl vtltape[24901]: add_lu(): Child PID 24902 starting logical unit [12:0:3]
May  5 11:46:37 vtl vtltape[24901]: main(): Successfully started daemon: PID 24903
May  5 11:46:37 vtl vtltape[24903]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [12:0:3]
May  5 11:46:37 vtl vtltape[24903]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24903]: main(): Cleaning up after add_lu child pid: 24902
May  5 11:46:37 vtl vtltape[24903]: CDB (14009) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14009)
May  5 11:46:37 vtl vtltape[24903]: CDB (14010) (delay 805): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14010)
May  5 11:46:37 vtl vtltape[24904]: init_lu(): NAA: Incorrect params  NAA: 200:11:22:33:ab:12:00:4 : using defaults
May  5 11:46:37 vtl kernel: scsi 4:12:0:3: Sequential-Access IBM      ULT3580-TD5      252D PQ: 0 ANSI: 5
May  5 11:46:37 vtl vtltape[24904]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24904]: add_lu(): Child PID 24906 starting logical unit [12:0:4]
May  5 11:46:37 vtl vtltape[24902]: add_lu(): Child anounces 'lu [12:0:3] created'.
May  5 11:46:37 vtl kernel: st 4:12:0:3: Attached scsi tape st64
May  5 11:46:37 vtl kernel: st 4:12:0:3: st64: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:12:0:3: Attached scsi generic sg70 type 1
May  5 11:46:37 vtl vtltape[24900]: CDB (14012) (delay 4005): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14012)
May  5 11:46:37 vtl vtltape[24900]: CDB (14013) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14013)
May  5 11:46:37 vtl vtltape[24900]: CDB (14014) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14014)
May  5 11:46:37 vtl vtltape[24900]: CDB (14015) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14015)
May  5 11:46:37 vtl vtltape[24900]: CDB (14016) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14016)
May  5 11:46:37 vtl vtltape[24900]: CDB (14017) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14017)
May  5 11:46:37 vtl vtltape[24900]: CDB (14018) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14018)
May  5 11:46:37 vtl vtltape[24900]: CDB (14019) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24900]: spc_inquiry(): INQUIRY ** (14019)
May  5 11:46:37 vtl vtltape[24904]: main(): Successfully started daemon: PID 24911
May  5 11:46:37 vtl vtltape[24911]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [12:0:4]
May  5 11:46:37 vtl vtltape[24911]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24911]: main(): Cleaning up after add_lu child pid: 24906
May  5 11:46:37 vtl vtltape[24911]: CDB (14011) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14011)
May  5 11:46:37 vtl vtltape[24911]: CDB (14020) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14020)
May  5 11:46:37 vtl kernel: scsi 4:12:0:4: Sequential-Access IBM      ULT3580-TD5      252D PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:12:0:4: Attached scsi tape st65
May  5 11:46:37 vtl kernel: st 4:12:0:4: st65: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl vtltape[24906]: add_lu(): Child anounces 'lu [12:0:4] created'.
May  5 11:46:37 vtl kernel: st 4:12:0:4: Attached scsi generic sg71 type 1
May  5 11:46:37 vtl vtltape[24912]: init_lu(): NAA: Incorrect params  NAA: 220:11:22:33:ab:13:00:01 : using defaults
May  5 11:46:37 vtl vtltape[24912]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24912]: add_lu(): Child PID 24915 starting logical unit [13:0:1]
May  5 11:46:37 vtl vtltape[24911]: CDB (14021) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14021)
May  5 11:46:37 vtl vtltape[24911]: CDB (14022) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14022)
May  5 11:46:37 vtl vtltape[24911]: CDB (14024) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14024)
May  5 11:46:37 vtl vtltape[24911]: CDB (14025) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14025)
May  5 11:46:37 vtl vtltape[24911]: CDB (14026) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14026)
May  5 11:46:37 vtl vtltape[24911]: CDB (14027) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14027)
May  5 11:46:37 vtl vtltape[24911]: CDB (14028) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14028)
May  5 11:46:37 vtl vtltape[24911]: CDB (14029) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24911]: spc_inquiry(): INQUIRY ** (14029)
May  5 11:46:37 vtl vtltape[24903]: CDB (14030) (delay 4805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14030)
May  5 11:46:37 vtl vtltape[24903]: CDB (14031) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14031)
May  5 11:46:37 vtl vtltape[24903]: CDB (14032) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14032)
May  5 11:46:37 vtl vtltape[24903]: CDB (14033) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14033)
May  5 11:46:37 vtl vtltape[24903]: CDB (14034) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14034)
May  5 11:46:37 vtl vtltape[24903]: CDB (14035) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14035)
May  5 11:46:37 vtl vtltape[24903]: CDB (14036) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14036)
May  5 11:46:37 vtl vtltape[24903]: CDB (14037) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24903]: spc_inquiry(): INQUIRY ** (14037)
May  5 11:46:37 vtl vtltape[24912]: main(): Successfully started daemon: PID 24922
May  5 11:46:37 vtl vtltape[24922]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [13:0:1]
May  5 11:46:37 vtl vtltape[24922]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24922]: main(): Cleaning up after add_lu child pid: 24915
May  5 11:46:37 vtl vtltape[24922]: CDB (14023) (delay 50000): 12 20 00 00 24 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14023)
May  5 11:46:37 vtl vtltape[24922]: CDB (14038) (delay 5): 12 20 00 00 40 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14038)
May  5 11:46:37 vtl kernel: scsi 4:13:0:1: Sequential-Access HP       Ultrium 4-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:37 vtl vtltape[24915]: add_lu(): Child anounces 'lu [13:0:1] created'.
May  5 11:46:37 vtl vtltape[24923]: init_lu(): NAA: Incorrect params  NAA: 220:11:22:33:ab:13:00:2 : using defaults
May  5 11:46:37 vtl vtltape[24923]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24922]: CDB (14039) (delay 405): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14039)
May  5 11:46:37 vtl kernel: st 4:13:0:1: Attached scsi tape st66
May  5 11:46:37 vtl kernel: st 4:13:0:1: st66: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:13:0:1: Attached scsi generic sg72 type 1
May  5 11:46:37 vtl vtltape[24922]: CDB (14040) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14040)
May  5 11:46:37 vtl vtltape[24923]: add_lu(): Child PID 24926 starting logical unit [13:0:2]
May  5 11:46:37 vtl vtltape[24922]: CDB (14042) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14042)
May  5 11:46:37 vtl vtltape[24922]: CDB (14043) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14043)
May  5 11:46:37 vtl vtltape[24922]: CDB (14044) (delay 405): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14044)
May  5 11:46:37 vtl vtltape[24922]: CDB (14045) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14045)
May  5 11:46:37 vtl vtltape[24922]: CDB (14046) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14046)
May  5 11:46:37 vtl vtltape[24922]: CDB (14047) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24922]: spc_inquiry(): INQUIRY ** (14047)
May  5 11:46:37 vtl vtltape[24923]: main(): Successfully started daemon: PID 24929
May  5 11:46:37 vtl vtltape[24929]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [13:0:2]
May  5 11:46:37 vtl vtltape[24929]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24929]: main(): Cleaning up after add_lu child pid: 24926
May  5 11:46:37 vtl vtltape[24929]: CDB (14041) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14041)
May  5 11:46:37 vtl vtltape[24929]: CDB (14048) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14048)
May  5 11:46:37 vtl kernel: scsi 4:13:0:2: Sequential-Access HP       Ultrium 4-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:13:0:2: Attached scsi tape st67
May  5 11:46:37 vtl kernel: st 4:13:0:2: st67: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:13:0:2: Attached scsi generic sg73 type 1
May  5 11:46:37 vtl vtltape[24926]: add_lu(): Child anounces 'lu [13:0:2] created'.
May  5 11:46:37 vtl vtltape[24929]: CDB (14049) (delay 805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24930]: init_lu(): NAA: Incorrect params  NAA: 220:11:22:33:ab:13:00:3 : using defaults
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14049)
May  5 11:46:37 vtl vtltape[24930]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24929]: CDB (14050) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14050)
May  5 11:46:37 vtl vtltape[24929]: CDB (14051) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14051)
May  5 11:46:37 vtl vtltape[24929]: CDB (14052) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14052)
May  5 11:46:37 vtl vtltape[24930]: add_lu(): Child PID 24934 starting logical unit [13:0:3]
May  5 11:46:37 vtl vtltape[24929]: CDB (14054) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14054)
May  5 11:46:37 vtl vtltape[24929]: CDB (14055) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14055)
May  5 11:46:37 vtl vtltape[24929]: CDB (14056) (delay 805): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14056)
May  5 11:46:37 vtl vtltape[24929]: CDB (14057) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24929]: spc_inquiry(): INQUIRY ** (14057)
May  5 11:46:37 vtl vtltape[24930]: main(): Successfully started daemon: PID 24936
May  5 11:46:37 vtl vtltape[24936]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [13:0:3]
May  5 11:46:37 vtl vtltape[24936]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24936]: main(): Cleaning up after add_lu child pid: 24934
May  5 11:46:37 vtl vtltape[24936]: CDB (14053) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14053)
May  5 11:46:37 vtl vtltape[24936]: CDB (14058) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14058)
May  5 11:46:37 vtl kernel: scsi 4:13:0:3: Sequential-Access HP       Ultrium 4-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:13:0:3: Attached scsi tape st68
May  5 11:46:37 vtl kernel: st 4:13:0:3: st68: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl vtltape[24937]: init_lu(): NAA: Incorrect params  NAA: 220:11:22:33:ab:13:00:4 : using defaults
May  5 11:46:37 vtl vtltape[24937]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24934]: add_lu(): Child anounces 'lu [13:0:3] created'.
May  5 11:46:37 vtl kernel: st 4:13:0:3: Attached scsi generic sg74 type 1
May  5 11:46:37 vtl vtltape[24937]: add_lu(): Child PID 24938 starting logical unit [13:0:4]
May  5 11:46:37 vtl vtltape[24939]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [13:0:4]
May  5 11:46:37 vtl vtltape[24939]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24937]: main(): Successfully started daemon: PID 24939
May  5 11:46:37 vtl vtltape[24939]: main(): Cleaning up after add_lu child pid: 24938
May  5 11:46:37 vtl vtltape[24939]: CDB (14059) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14059)
May  5 11:46:37 vtl vtltape[24939]: CDB (14060) (delay 5): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14060)
May  5 11:46:37 vtl kernel: scsi 4:13:0:4: Sequential-Access HP       Ultrium 4-SCSI   1.27 PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:13:0:4: Attached scsi tape st69
May  5 11:46:37 vtl kernel: st 4:13:0:4: st69: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:13:0:4: Attached scsi generic sg75 type 1
May  5 11:46:37 vtl vtltape[24938]: add_lu(): Child anounces 'lu [13:0:4] created'.
May  5 11:46:37 vtl vtltape[24939]: CDB (14061) (delay 805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14061)
May  5 11:46:37 vtl vtltape[24939]: CDB (14062) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14062)
May  5 11:46:37 vtl vtltape[24939]: CDB (14063) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14063)
May  5 11:46:37 vtl vtltape[24939]: CDB (14064) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14064)
May  5 11:46:37 vtl vtltape[24939]: CDB (14065) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14065)
May  5 11:46:37 vtl vtltape[24940]: init_lu(): NAA: Incorrect params  NAA: 240:11:22:33:ab:14:00:01 : using defaults
May  5 11:46:37 vtl vtltape[24940]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24939]: CDB (14066) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14066)
May  5 11:46:37 vtl vtltape[24940]: add_lu(): Child PID 24944 starting logical unit [14:0:1]
May  5 11:46:37 vtl vtltape[24939]: CDB (14068) (delay 805): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14068)
May  5 11:46:37 vtl vtltape[24939]: CDB (14069) (delay 805): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24939]: spc_inquiry(): INQUIRY ** (14069)
May  5 11:46:37 vtl vtltape[24936]: CDB (14070) (delay 4405): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14070)
May  5 11:46:37 vtl vtltape[24936]: CDB (14071) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14071)
May  5 11:46:37 vtl vtltape[24936]: CDB (14072) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14072)
May  5 11:46:37 vtl vtltape[24936]: CDB (14073) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14073)
May  5 11:46:37 vtl vtltape[24936]: CDB (14074) (delay 805): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14074)
May  5 11:46:37 vtl vtltape[24936]: CDB (14075) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14075)
May  5 11:46:37 vtl vtltape[24936]: CDB (14076) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14076)
May  5 11:46:37 vtl vtltape[24936]: CDB (14077) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24936]: spc_inquiry(): INQUIRY ** (14077)
May  5 11:46:37 vtl vtltape[24950]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [14:0:1]
May  5 11:46:37 vtl vtltape[24940]: main(): Successfully started daemon: PID 24950
May  5 11:46:37 vtl vtltape[24950]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24950]: main(): Cleaning up after add_lu child pid: 24944
May  5 11:46:37 vtl vtltape[24950]: CDB (14067) (delay 50000): 12 20 00 00 24 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14067)
May  5 11:46:37 vtl vtltape[24950]: CDB (14078) (delay 405): 12 20 00 00 40 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14078)
May  5 11:46:37 vtl vtltape[24944]: add_lu(): Child anounces 'lu [14:0:1] created'.
May  5 11:46:37 vtl kernel: scsi 4:14:0:1: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:14:0:1: Attached scsi tape st70
May  5 11:46:37 vtl kernel: st 4:14:0:1: st70: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:14:0:1: Attached scsi generic sg76 type 1
May  5 11:46:37 vtl vtltape[24951]: init_lu(): NAA: Incorrect params  NAA: 240:11:22:33:ab:14:00:2 : using defaults
May  5 11:46:37 vtl vtltape[24951]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24951]: add_lu(): Child PID 24954 starting logical unit [14:0:2]
May  5 11:46:37 vtl vtltape[24950]: CDB (14079) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14079)
May  5 11:46:37 vtl vtltape[24950]: CDB (14080) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14080)
May  5 11:46:37 vtl vtltape[24950]: CDB (14081) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14081)
May  5 11:46:37 vtl vtltape[24950]: CDB (14082) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14082)
May  5 11:46:37 vtl vtltape[24950]: CDB (14084) (delay 805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14084)
May  5 11:46:37 vtl vtltape[24950]: CDB (14085) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14085)
May  5 11:46:37 vtl vtltape[24950]: CDB (14086) (delay 805): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14086)
May  5 11:46:37 vtl vtltape[24950]: CDB (14087) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24950]: spc_inquiry(): INQUIRY ** (14087)
May  5 11:46:37 vtl vtltape[24951]: main(): Successfully started daemon: PID 24957
May  5 11:46:37 vtl vtltape[24957]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [14:0:2]
May  5 11:46:37 vtl vtltape[24957]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24957]: main(): Cleaning up after add_lu child pid: 24954
May  5 11:46:37 vtl vtltape[24957]: CDB (14083) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14083)
May  5 11:46:37 vtl vtltape[24957]: CDB (14088) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14088)
May  5 11:46:37 vtl kernel: scsi 4:14:0:2: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:14:0:2: Attached scsi tape st71
May  5 11:46:37 vtl kernel: st 4:14:0:2: st71: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:14:0:2: Attached scsi generic sg77 type 1
May  5 11:46:37 vtl vtltape[24954]: add_lu(): Child anounces 'lu [14:0:2] created'.
May  5 11:46:37 vtl vtltape[24958]: init_lu(): NAA: Incorrect params  NAA: 240:11:22:33:ab:14:00:3 : using defaults
May  5 11:46:37 vtl vtltape[24958]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24957]: CDB (14089) (delay 805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14089)
May  5 11:46:37 vtl vtltape[24957]: CDB (14090) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14090)
May  5 11:46:37 vtl vtltape[24957]: CDB (14091) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14091)
May  5 11:46:37 vtl vtltape[24957]: CDB (14092) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14092)
May  5 11:46:37 vtl vtltape[24958]: add_lu(): Child PID 24961 starting logical unit [14:0:3]
May  5 11:46:37 vtl vtltape[24957]: CDB (14093) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14093)
May  5 11:46:37 vtl vtltape[24957]: CDB (14094) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14094)
May  5 11:46:37 vtl vtltape[24957]: CDB (14096) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14096)
May  5 11:46:37 vtl vtltape[24957]: CDB (14097) (delay 805): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24957]: spc_inquiry(): INQUIRY ** (14097)
May  5 11:46:37 vtl vtltape[24958]: main(): Successfully started daemon: PID 24964
May  5 11:46:37 vtl vtltape[24964]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [14:0:3]
May  5 11:46:37 vtl vtltape[24964]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24964]: main(): Cleaning up after add_lu child pid: 24961
May  5 11:46:37 vtl vtltape[24964]: CDB (14095) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14095)
May  5 11:46:37 vtl vtltape[24964]: CDB (14098) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14098)
May  5 11:46:37 vtl kernel: scsi 4:14:0:3: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:14:0:3: Attached scsi tape st72
May  5 11:46:37 vtl kernel: st 4:14:0:3: st72: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:14:0:3: Attached scsi generic sg78 type 1
May  5 11:46:37 vtl vtltape[24961]: add_lu(): Child anounces 'lu [14:0:3] created'.
May  5 11:46:37 vtl vtltape[24965]: init_lu(): NAA: Incorrect params  NAA: 240:11:22:33:ab:14:00:4 : using defaults
May  5 11:46:37 vtl vtltape[24965]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24965]: add_lu(): Child PID 24966 starting logical unit [14:0:4]
May  5 11:46:37 vtl vtltape[24965]: main(): Successfully started daemon: PID 24967
May  5 11:46:37 vtl vtltape[24967]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [14:0:4]
May  5 11:46:37 vtl vtltape[24967]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24967]: main(): Cleaning up after add_lu child pid: 24966
May  5 11:46:37 vtl vtltape[24967]: CDB (14099) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14099)
May  5 11:46:37 vtl vtltape[24967]: CDB (14100) (delay 5): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14100)
May  5 11:46:37 vtl kernel: scsi 4:14:0:4: Sequential-Access IBM      ULT3580-TD4      252D PQ: 0 ANSI: 5
May  5 11:46:37 vtl vtltape[24966]: add_lu(): Child anounces 'lu [14:0:4] created'.
May  5 11:46:37 vtl kernel: st 4:14:0:4: Attached scsi tape st73
May  5 11:46:37 vtl kernel: st 4:14:0:4: st73: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:14:0:4: Attached scsi generic sg79 type 1
May  5 11:46:37 vtl vtltape[24968]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24967]: CDB (14101) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14101)
May  5 11:46:37 vtl vtltape[24967]: CDB (14102) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14102)
May  5 11:46:37 vtl vtltape[24968]: add_lu(): Child PID 24971 starting logical unit [14:2:1]
May  5 11:46:37 vtl vtltape[24967]: CDB (14103) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14103)
May  5 11:46:37 vtl vtltape[24967]: CDB (14104) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14104)
May  5 11:46:37 vtl vtltape[24967]: CDB (14106) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14106)
May  5 11:46:37 vtl vtltape[24967]: CDB (14107) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14107)
May  5 11:46:37 vtl vtltape[24967]: CDB (14108) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14108)
May  5 11:46:37 vtl vtltape[24967]: CDB (14109) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24967]: spc_inquiry(): INQUIRY ** (14109)
May  5 11:46:37 vtl vtltape[24964]: CDB (14110) (delay 4405): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14110)
May  5 11:46:37 vtl vtltape[24964]: CDB (14111) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14111)
May  5 11:46:37 vtl vtltape[24964]: CDB (14112) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14112)
May  5 11:46:37 vtl vtltape[24964]: CDB (14113) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14113)
May  5 11:46:37 vtl vtltape[24964]: CDB (14114) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14114)
May  5 11:46:37 vtl vtltape[24964]: CDB (14115) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14115)
May  5 11:46:37 vtl vtltape[24964]: CDB (14116) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14116)
May  5 11:46:37 vtl vtltape[24964]: CDB (14117) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24964]: spc_inquiry(): INQUIRY ** (14117)
May  5 11:46:37 vtl vtltape[24968]: main(): Successfully started daemon: PID 24978
May  5 11:46:37 vtl vtltape[24978]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [14:2:1]
May  5 11:46:37 vtl vtltape[24978]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24978]: main(): Cleaning up after add_lu child pid: 24971
May  5 11:46:37 vtl vtltape[24978]: CDB (14105) (delay 50000): 12 20 00 00 24 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14105)
May  5 11:46:37 vtl vtltape[24978]: CDB (14118) (delay 405): 12 20 00 00 40 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14118)
May  5 11:46:37 vtl kernel: scsi 4:14:2:1: Sequential-Access HP       Ultrium 5-SCSI   Y34W PQ: 0 ANSI: 5
May  5 11:46:37 vtl vtltape[24971]: add_lu(): Child anounces 'lu [14:2:1] created'.
May  5 11:46:37 vtl kernel: st 4:14:2:1: Attached scsi tape st74
May  5 11:46:37 vtl kernel: st 4:14:2:1: st74: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:14:2:1: Attached scsi generic sg80 type 1
May  5 11:46:37 vtl vtltape[24979]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24979]: add_lu(): Child PID 24981 starting logical unit [14:2:2]
May  5 11:46:37 vtl vtltape[24978]: CDB (14120) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14120)
May  5 11:46:37 vtl vtltape[24978]: CDB (14121) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14121)
May  5 11:46:37 vtl vtltape[24978]: CDB (14122) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14122)
May  5 11:46:37 vtl vtltape[24978]: CDB (14123) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14123)
May  5 11:46:37 vtl vtltape[24978]: CDB (14124) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14124)
May  5 11:46:37 vtl vtltape[24978]: CDB (14125) (delay 5): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14125)
May  5 11:46:37 vtl vtltape[24978]: CDB (14126) (delay 5): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14126)
May  5 11:46:37 vtl vtltape[24978]: CDB (14127) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24978]: spc_inquiry(): INQUIRY ** (14127)
May  5 11:46:37 vtl vtltape[24979]: main(): Successfully started daemon: PID 24985
May  5 11:46:37 vtl vtltape[24985]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [14:2:2]
May  5 11:46:37 vtl vtltape[24985]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24985]: main(): Cleaning up after add_lu child pid: 24981
May  5 11:46:37 vtl vtltape[24985]: CDB (14119) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14119)
May  5 11:46:37 vtl vtltape[24985]: CDB (14128) (delay 5): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14128)
May  5 11:46:37 vtl kernel: scsi 4:14:2:2: Sequential-Access HP       Ultrium 5-SCSI   Y5BW PQ: 0 ANSI: 5
May  5 11:46:37 vtl kernel: st 4:14:2:2: Attached scsi tape st75
May  5 11:46:37 vtl kernel: st 4:14:2:2: st75: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:14:2:2: Attached scsi generic sg81 type 1
May  5 11:46:37 vtl vtltape[24981]: add_lu(): Child anounces 'lu [14:2:2] created'.
May  5 11:46:37 vtl vtltape[24985]: CDB (14129) (delay 805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14129)
May  5 11:46:37 vtl vtltape[24985]: CDB (14130) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14130)
May  5 11:46:37 vtl vtltape[24986]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24986]: add_lu(): Child PID 24989 starting logical unit [14:2:3]
May  5 11:46:37 vtl vtltape[24985]: CDB (14131) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14131)
May  5 11:46:37 vtl vtltape[24985]: CDB (14132) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14132)
May  5 11:46:37 vtl vtltape[24985]: CDB (14133) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14133)
May  5 11:46:37 vtl vtltape[24985]: CDB (14134) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14134)
May  5 11:46:37 vtl vtltape[24985]: CDB (14136) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14136)
May  5 11:46:37 vtl vtltape[24985]: CDB (14137) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24985]: spc_inquiry(): INQUIRY ** (14137)
May  5 11:46:37 vtl vtltape[24986]: main(): Successfully started daemon: PID 24992
May  5 11:46:37 vtl vtltape[24992]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [14:2:3]
May  5 11:46:37 vtl vtltape[24992]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24992]: main(): Cleaning up after add_lu child pid: 24989
May  5 11:46:37 vtl vtltape[24992]: CDB (14135) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14135)
May  5 11:46:37 vtl vtltape[24992]: CDB (14138) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14138)
May  5 11:46:37 vtl kernel: scsi 4:14:2:3: Sequential-Access HP       Ultrium 5-SCSI   Y34W PQ: 0 ANSI: 5
May  5 11:46:37 vtl vtltape[24993]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl kernel: st 4:14:2:3: Attached scsi tape st76
May  5 11:46:37 vtl kernel: st 4:14:2:3: st76: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:14:2:3: Attached scsi generic sg82 type 1
May  5 11:46:37 vtl vtltape[24989]: add_lu(): Child anounces 'lu [14:2:3] created'.
May  5 11:46:37 vtl vtltape[24993]: add_lu(): Child PID 24994 starting logical unit [14:2:4]
May  5 11:46:37 vtl vtltape[24993]: main(): Successfully started daemon: PID 24995
May  5 11:46:37 vtl vtltape[24995]: main(): Started vtltape: version 1.5.0, verbose log lvl: 1, lu [14:2:4]
May  5 11:46:37 vtl vtltape[24995]: main(): Size of buffer is 2097152
May  5 11:46:37 vtl vtltape[24995]: main(): Cleaning up after add_lu child pid: 24994
May  5 11:46:37 vtl vtltape[24995]: CDB (14139) (delay 50000): 12 00 00 00 24 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14139)
May  5 11:46:37 vtl vtltape[24995]: CDB (14140) (delay 5): 12 00 00 00 40 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14140)
May  5 11:46:37 vtl kernel: scsi 4:14:2:4: Sequential-Access HP       Ultrium 5-SCSI   Y5BW PQ: 0 ANSI: 5
May  5 11:46:37 vtl vtltape[24994]: add_lu(): Child anounces 'lu [14:2:4] created'.
May  5 11:46:37 vtl kernel: st 4:14:2:4: Attached scsi tape st77
May  5 11:46:37 vtl kernel: st 4:14:2:4: st77: try direct i/o: yes (alignment 4 B)
May  5 11:46:37 vtl kernel: st 4:14:2:4: Attached scsi generic sg83 type 1
May  5 11:46:37 vtl vtltape[24995]: CDB (14141) (delay 805): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14141)
May  5 11:46:37 vtl vtltape[24995]: CDB (14142) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14142)
May  5 11:46:37 vtl vtltape[24995]: CDB (14143) (delay 5): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14143)
May  5 11:46:37 vtl vtltape[24995]: CDB (14144) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14144)
May  5 11:46:37 vtl vtltape[24995]: CDB (14145) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14145)
May  5 11:46:37 vtl vtltape[24995]: CDB (14146) (delay 5): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14146)
May  5 11:46:37 vtl vtllibrary[24999]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[24999]: init_lu(): Adding default vers info: 0105
May  5 11:46:37 vtl vtltape[24992]: CDB (14147) (delay 4405): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14147)
May  5 11:46:37 vtl vtltape[24992]: CDB (14148) (delay 405): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14148)
May  5 11:46:37 vtl vtltape[24992]: CDB (14149) (delay 805): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14149)
May  5 11:46:37 vtl vtltape[24992]: CDB (14151) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14151)
May  5 11:46:37 vtl vtllibrary[24999]: add_lu(): Child PID 25003 starting logical unit [0:8:0]
May  5 11:46:37 vtl vtllibrary[24999]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24995]: CDB (14150) (delay 2405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14150)
May  5 11:46:37 vtl vtltape[24995]: CDB (14152) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24995]: spc_inquiry(): INQUIRY ** (14152)
May  5 11:46:37 vtl vtltape[24992]: CDB (14153) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14153)
May  5 11:46:37 vtl vtltape[24992]: CDB (14155) (delay 805): 12 01 00 00 fe 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14155)
May  5 11:46:37 vtl vtltape[24992]: CDB (14156) (delay 405): 12 01 80 00 fe 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14156)
May  5 11:46:37 vtl vtltape[24992]: CDB (14157) (delay 405): 12 01 83 00 fe 00
May  5 11:46:37 vtl vtltape[24992]: spc_inquiry(): INQUIRY ** (14157)
May  5 11:46:37 vtl vtllibrary[25007]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [0:8:0]
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14154) (delay 0): 12 00 00 00 24 00
May  5 11:46:37 vtl vtllibrary[25007]: spc_inquiry(): INQUIRY ** (14154)
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14158) (delay 405): 12 00 00 00 40 00
May  5 11:46:37 vtl vtllibrary[25007]: spc_inquiry(): INQUIRY ** (14158)
May  5 11:46:37 vtl vtllibrary[25008]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl kernel: scsi 4:0:8:0: Medium Changer    STK      L700             0105 PQ: 0 ANSI: 5
May  5 11:46:37 vtl vtllibrary[25008]: init_ibm3584(): 03584L22         library should contain 03592 drives
May  5 11:46:37 vtl kernel: ch0: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:37 vtl kernel: ch0: type #2 (st): 0x400+39 [storage]
May  5 11:46:37 vtl kernel: ch0: type #3 (ie): 0x10+4 [import/export]
May  5 11:46:37 vtl kernel: ch0: type #4 (dt): 0x1f0+6 [data transfer]
May  5 11:46:37 vtl kernel: ch0: dt 0x1f0: ID/LUN unknown
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14159) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:37 vtl vtllibrary[25007]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14160) (delay 5): 1a 00 1d 00 ff 00
May  5 11:46:37 vtl vtllibrary[25007]: spc_mode_sense(): MODE SENSE 6 (14160) **
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14161) (delay 5): b8 04 01 f0 00 01 00 00 00 ff 00 00
May  5 11:46:37 vtl vtllibrary[25007]: smc_read_element_status(): READ ELEMENT STATUS (14161) **
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14162) (delay 5): b8 04 01 f1 00 01 00 00 00 ff 00 00
May  5 11:46:37 vtl vtllibrary[25007]: smc_read_element_status(): READ ELEMENT STATUS (14162) **
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14163) (delay 5): b8 04 01 f2 00 01 00 00 00 ff 00 00
May  5 11:46:37 vtl vtllibrary[25007]: smc_read_element_status(): READ ELEMENT STATUS (14163) **
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14164) (delay 5): b8 04 01 f3 00 01 00 00 00 ff 00 00
May  5 11:46:37 vtl vtllibrary[25007]: smc_read_element_status(): READ ELEMENT STATUS (14164) **
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14165) (delay 5): b8 04 01 f4 00 01 00 00 00 ff 00 00
May  5 11:46:37 vtl vtllibrary[25007]: smc_read_element_status(): READ ELEMENT STATUS (14165) **
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14166) (delay 5): b8 04 01 f5 00 01 00 00 00 ff 00 00
May  5 11:46:37 vtl vtllibrary[25007]: smc_read_element_status(): READ ELEMENT STATUS (14166) **
May  5 11:46:37 vtl vtllibrary[25008]: add_lu(): Child PID 25009 starting logical unit [0:5:0]
May  5 11:46:37 vtl kernel: ch0: dt 0x1f1: ID/LUN unknown
May  5 11:46:37 vtl vtllibrary[25008]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl kernel: ch0: dt 0x1f2: ID/LUN unknown
May  5 11:46:37 vtl kernel: ch0: dt 0x1f3: ID/LUN unknown
May  5 11:46:37 vtl kernel: ch0: dt 0x1f4: ID/LUN unknown
May  5 11:46:37 vtl vtltape[24457]: processMessageQ(): Sender id: 10, msg : Register
May  5 11:46:37 vtl vtltape[24457]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25007]: CDB (14167) (delay 5): 07 00 00 00 00 00
May  5 11:46:37 vtl vtllibrary[25007]: smc_initialize_element_status(): INITIALIZE ELEMENT (14167) **
May  5 11:46:37 vtl kernel: ch0: dt 0x1f5: ID/LUN unknown
May  5 11:46:37 vtl kernel: ch0: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:37 vtl vtllibrary[25010]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [0:5:0]
May  5 11:46:37 vtl vtllibrary[25011]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24478]: processMessageQ(): Sender id: 10, msg : Register
May  5 11:46:37 vtl vtltape[24481]: processMessageQ(): Sender id: 10, msg : Register
May  5 11:46:37 vtl vtltape[24481]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24478]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24513]: processMessageQ(): Sender id: 40, msg : Register
May  5 11:46:37 vtl vtltape[24513]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25011]: init_ibm3584(): 03584L22         library should contain 03592 drives
May  5 11:46:37 vtl vtllibrary[25011]: add_lu(): Child PID 25012 starting logical unit [1:0:0]
May  5 11:46:37 vtl vtllibrary[25011]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24441]: processMessageQ(): Sender id: 10, msg : Register
May  5 11:46:37 vtl vtltape[24441]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25013]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [1:0:0]
May  5 11:46:37 vtl vtllibrary[25014]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[25014]: init_ibm3584(): 03584L22         library should contain 03592 drives
May  5 11:46:37 vtl vtltape[24538]: processMessageQ(): Sender id: 50, msg : Register
May  5 11:46:37 vtl vtltape[24538]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24531]: processMessageQ(): Sender id: 50, msg : Register
May  5 11:46:37 vtl vtltape[24531]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25014]: add_lu(): Child PID 25015 starting logical unit [1:2:0]
May  5 11:46:37 vtl vtllibrary[25014]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24486]: processMessageQ(): Sender id: 40, msg : Register
May  5 11:46:37 vtl vtltape[24486]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24508]: processMessageQ(): Sender id: 40, msg : Register
May  5 11:46:37 vtl vtltape[24508]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24559]: processMessageQ(): Sender id: 50, msg : Register
May  5 11:46:37 vtl vtltape[24559]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24464]: processMessageQ(): Sender id: 10, msg : Register
May  5 11:46:37 vtl vtltape[24464]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24471]: processMessageQ(): Sender id: 10, msg : Register
May  5 11:46:37 vtl vtltape[24471]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25016]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [1:2:0]
May  5 11:46:37 vtl vtllibrary[25017]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[25017]: add_lu(): Child PID 25018 starting logical unit [2:2:0]
May  5 11:46:37 vtl vtllibrary[25017]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24588]: processMessageQ(): Sender id: 60, msg : Register
May  5 11:46:37 vtl vtltape[24588]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24503]: processMessageQ(): Sender id: 40, msg : Register
May  5 11:46:37 vtl vtltape[24503]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24522]: processMessageQ(): Sender id: 40, msg : Register
May  5 11:46:37 vtl vtltape[24522]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24574]: processMessageQ(): Sender id: 60, msg : Register
May  5 11:46:37 vtl vtltape[24574]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24581]: processMessageQ(): Sender id: 60, msg : Register
May  5 11:46:37 vtl vtltape[24581]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24552]: processMessageQ(): Sender id: 50, msg : Register
May  5 11:46:37 vtl vtltape[24552]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25019]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [2:2:0]
May  5 11:46:37 vtl vtltape[24545]: processMessageQ(): Sender id: 50, msg : Register
May  5 11:46:37 vtl vtltape[24545]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25020]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[25020]: init_ibm3584(): 03584L22         library should contain 03592 drives
May  5 11:46:37 vtl vtltape[24603]: processMessageQ(): Sender id: 70, msg : Register
May  5 11:46:37 vtl vtltape[24603]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24610]: processMessageQ(): Sender id: 70, msg : Register
May  5 11:46:37 vtl vtltape[24610]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25020]: add_lu(): Child PID 25021 starting logical unit [2:3:0]
May  5 11:46:37 vtl vtllibrary[25020]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24566]: processMessageQ(): Sender id: 60, msg : Register
May  5 11:46:37 vtl vtltape[24566]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25022]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [2:3:0]
May  5 11:46:37 vtl vtltape[24659]: processMessageQ(): Sender id: 80, msg : Register
May  5 11:46:37 vtl vtltape[24659]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25023]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[25023]: init_lu(): Adding default vers info: 0105
May  5 11:46:37 vtl vtltape[24595]: processMessageQ(): Sender id: 60, msg : Register
May  5 11:46:37 vtl vtltape[24595]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24638]: processMessageQ(): Sender id: 80, msg : Register
May  5 11:46:37 vtl vtltape[24638]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25023]: add_lu(): Child PID 25024 starting logical unit [0:9:0]
May  5 11:46:37 vtl vtltape[24624]: processMessageQ(): Sender id: 70, msg : Register
May  5 11:46:37 vtl vtltape[24624]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25023]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtllibrary[25025]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [0:9:0]
May  5 11:46:37 vtl vtltape[24701]: processMessageQ(): Sender id: 90, msg : Register
May  5 11:46:37 vtl vtltape[24701]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24617]: processMessageQ(): Sender id: 70, msg : Register
May  5 11:46:37 vtl vtltape[24617]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24641]: processMessageQ(): Sender id: 80, msg : Register
May  5 11:46:37 vtl vtltape[24641]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25026]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[25026]: add_lu(): Child PID 25027 starting logical unit [4:0:0]
May  5 11:46:37 vtl vtllibrary[25026]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24680]: processMessageQ(): Sender id: 90, msg : Register
May  5 11:46:37 vtl vtltape[24680]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24631]: processMessageQ(): Sender id: 80, msg : Register
May  5 11:46:37 vtl vtltape[24631]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24652]: processMessageQ(): Sender id: 80, msg : Register
May  5 11:46:37 vtl vtltape[24652]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25028]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [4:0:0]
May  5 11:46:37 vtl vtllibrary[25029]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[25029]: init_ibm3584(): 03584L32         library should contain LTO drives
May  5 11:46:37 vtl vtllibrary[25029]: add_lu(): Child PID 25030 starting logical unit [5:0:0]
May  5 11:46:37 vtl vtllibrary[25029]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24662]: processMessageQ(): Sender id: 90, msg : Register
May  5 11:46:37 vtl vtltape[24662]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24715]: processMessageQ(): Sender id: 110, msg : Register
May  5 11:46:37 vtl vtltape[24715]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24708]: processMessageQ(): Sender id: 110, msg : Register
May  5 11:46:37 vtl vtltape[24708]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24730]: processMessageQ(): Sender id: 110, msg : Register
May  5 11:46:37 vtl vtltape[24730]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24694]: processMessageQ(): Sender id: 90, msg : Register
May  5 11:46:37 vtl vtltape[24694]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24687]: processMessageQ(): Sender id: 90, msg : Register
May  5 11:46:37 vtl vtllibrary[25031]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [5:0:0]
May  5 11:46:37 vtl vtltape[24687]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24737]: processMessageQ(): Sender id: 20, msg : Register
May  5 11:46:37 vtl vtltape[24737]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24673]: processMessageQ(): Sender id: 90, msg : Register
May  5 11:46:37 vtl vtltape[24673]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24723]: processMessageQ(): Sender id: 110, msg : Register
May  5 11:46:37 vtl vtltape[24723]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25032]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[25032]: add_lu(): Child PID 25033 starting logical unit [5:3:0]
May  5 11:46:37 vtl vtllibrary[25032]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24744]: processMessageQ(): Sender id: 20, msg : Register
May  5 11:46:37 vtl vtltape[24744]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25034]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [5:3:0]
May  5 11:46:37 vtl vtllibrary[25035]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24765]: processMessageQ(): Sender id: 30, msg : Register
May  5 11:46:37 vtl vtltape[24765]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25035]: add_lu(): Child PID 25036 starting logical unit [8:0:0]
May  5 11:46:37 vtl vtllibrary[25035]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24758]: processMessageQ(): Sender id: 20, msg : Register
May  5 11:46:37 vtl vtltape[24758]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24751]: processMessageQ(): Sender id: 20, msg : Register
May  5 11:46:37 vtl vtltape[24751]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25037]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [8:0:0]
May  5 11:46:37 vtl vtllibrary[25038]: init_lu(): NAA: Incorrect params:  NAA: 140:11:22:33:ab:9:00:00, Using defaults
May  5 11:46:37 vtl vtllibrary[25038]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[25038]: add_lu(): Child PID 25039 starting logical unit [9:0:0]
May  5 11:46:37 vtl vtltape[24768]: processMessageQ(): Sender id: 30, msg : Register
May  5 11:46:37 vtl vtltape[24768]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25038]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24796]: processMessageQ(): Sender id: 120, msg : Register
May  5 11:46:37 vtl vtltape[24796]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24789]: processMessageQ(): Sender id: 120, msg : Register
May  5 11:46:37 vtl vtltape[24789]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24786]: processMessageQ(): Sender id: 30, msg : Register
May  5 11:46:37 vtl vtltape[24786]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24777]: processMessageQ(): Sender id: 30, msg : Register
May  5 11:46:37 vtl vtltape[24777]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25040]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [9:0:0]
May  5 11:46:37 vtl vtltape[24853]: processMessageQ(): Sender id: 140, msg : Register
May  5 11:46:37 vtl vtltape[24853]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24819]: processMessageQ(): Sender id: 140, msg : Register
May  5 11:46:37 vtl vtllibrary[25041]: init_lu(): NAA: Incorrect params:  NAA: 180:11:22:33:ab:11:00:00, Using defaults
May  5 11:46:37 vtl vtltape[24819]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25041]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24850]: processMessageQ(): Sender id: 140, msg : Register
May  5 11:46:37 vtl vtltape[24850]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25041]: add_lu(): Child PID 25042 starting logical unit [11:0:0]
May  5 11:46:37 vtl vtltape[24824]: processMessageQ(): Sender id: 140, msg : Register
May  5 11:46:37 vtl vtltape[24824]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25041]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24843]: processMessageQ(): Sender id: 140, msg : Register
May  5 11:46:37 vtl vtltape[24843]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24810]: processMessageQ(): Sender id: 120, msg : Register
May  5 11:46:37 vtl vtltape[24810]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24807]: processMessageQ(): Sender id: 120, msg : Register
May  5 11:46:37 vtl vtltape[24807]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25043]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [11:0:0]
May  5 11:46:37 vtl vtllibrary[25044]: init_lu(): NAA: Incorrect params:  NAA: 200:11:22:33:ab:12:00:00, Using defaults
May  5 11:46:37 vtl vtllibrary[25044]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtllibrary[25044]: init_ibm3584(): 03584L32         library should contain LTO drives
May  5 11:46:37 vtl vtltape[24879]: processMessageQ(): Sender id: 180, msg : Register
May  5 11:46:37 vtl vtltape[24879]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25044]: add_lu(): Child PID 25045 starting logical unit [12:0:0]
May  5 11:46:37 vtl vtllibrary[25044]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24835]: processMessageQ(): Sender id: 140, msg : Register
May  5 11:46:37 vtl vtltape[24835]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24859]: processMessageQ(): Sender id: 180, msg : Register
May  5 11:46:37 vtl vtltape[24859]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25046]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [12:0:0]
May  5 11:46:37 vtl vtltape[24911]: processMessageQ(): Sender id: 200, msg : Register
May  5 11:46:37 vtl vtltape[24911]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25047]: init_lu(): NAA: Incorrect params:  NAA: 220:11:22:33:ab:13:00:00, Using defaults
May  5 11:46:37 vtl vtllibrary[25047]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24903]: processMessageQ(): Sender id: 200, msg : Register
May  5 11:46:37 vtl vtltape[24903]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24865]: processMessageQ(): Sender id: 180, msg : Register
May  5 11:46:37 vtl vtltape[24865]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25047]: add_lu(): Child PID 25048 starting logical unit [13:0:0]
May  5 11:46:37 vtl vtllibrary[25047]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24886]: processMessageQ(): Sender id: 180, msg : Register
May  5 11:46:37 vtl vtltape[24886]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25049]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [13:0:0]
May  5 11:46:37 vtl vtltape[24939]: processMessageQ(): Sender id: 220, msg : Register
May  5 11:46:37 vtl vtltape[24893]: processMessageQ(): Sender id: 200, msg : Register
May  5 11:46:37 vtl vtltape[24893]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24939]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25050]: init_lu(): NAA: Incorrect params:  NAA: 240:11:22:33:ab:14:00:00, Using defaults
May  5 11:46:37 vtl vtllibrary[25050]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24900]: processMessageQ(): Sender id: 200, msg : Register
May  5 11:46:37 vtl vtltape[24900]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25050]: add_lu(): Child PID 25051 starting logical unit [14:0:0]
May  5 11:46:37 vtl vtllibrary[25050]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24929]: processMessageQ(): Sender id: 220, msg : Register
May  5 11:46:37 vtl vtltape[24929]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25052]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [14:0:0]
May  5 11:46:37 vtl vtltape[24936]: processMessageQ(): Sender id: 220, msg : Register
May  5 11:46:37 vtl vtltape[24936]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24967]: processMessageQ(): Sender id: 240, msg : Register
May  5 11:46:37 vtl vtltape[24967]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25053]: init_lu(): Backoff value: 400
May  5 11:46:37 vtl vtltape[24950]: processMessageQ(): Sender id: 240, msg : Register
May  5 11:46:37 vtl vtltape[24950]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24922]: processMessageQ(): Sender id: 220, msg : Register
May  5 11:46:37 vtl vtltape[24922]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25053]: add_lu(): Child PID 25054 starting logical unit [14:2:0]
May  5 11:46:37 vtl vtllibrary[25053]: main(): Setting buffer size to 1048576
May  5 11:46:37 vtl vtltape[24964]: processMessageQ(): Sender id: 240, msg : Register
May  5 11:46:37 vtl vtltape[24964]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtllibrary[25055]: main(): Started vtllibrary: version 1.5.0, verbose log lvl: 1, lu [14:2:0]
May  5 11:46:37 vtl vtltape[24985]: processMessageQ(): Sender id: 100, msg : Register
May  5 11:46:37 vtl vtltape[24985]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24957]: processMessageQ(): Sender id: 240, msg : Register
May  5 11:46:37 vtl vtltape[24957]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24992]: processMessageQ(): Sender id: 100, msg : Register
May  5 11:46:37 vtl vtltape[24992]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24995]: processMessageQ(): Sender id: 100, msg : Register
May  5 11:46:37 vtl vtltape[24995]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:37 vtl vtltape[24978]: processMessageQ(): Sender id: 100, msg : Register
May  5 11:46:37 vtl vtltape[24978]: processMessageQ(): Notice from Library controller : Register
May  5 11:46:38 vtl vtllibrary[25003]: add_lu(): Child anounces 'lu [0:8:0] created'.
May  5 11:46:38 vtl kernel: ch0: ... finished
May  5 11:46:38 vtl kernel: ch 4:0:8:0: Attached scsi changer ch0
May  5 11:46:38 vtl kernel: ch 4:0:8:0: Attached scsi generic sg84 type 8
May  5 11:46:38 vtl vtllibrary[25007]: CDB (14169) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:38 vtl vtllibrary[25007]: spc_inquiry(): INQUIRY ** (14169)
May  5 11:46:38 vtl vtllibrary[25007]: CDB (14170) (delay 805): 12 01 00 00 fe 00
May  5 11:46:38 vtl vtllibrary[25007]: spc_inquiry(): INQUIRY ** (14170)
May  5 11:46:38 vtl vtllibrary[25007]: CDB (14171) (delay 405): 12 01 80 00 fe 00
May  5 11:46:38 vtl vtllibrary[25007]: spc_inquiry(): INQUIRY ** (14171)
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14168) (delay 28400): 12 00 00 00 24 00
May  5 11:46:38 vtl vtllibrary[25010]: spc_inquiry(): INQUIRY ** (14168)
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14172) (delay 405): 12 00 00 00 40 00
May  5 11:46:38 vtl kernel: scsi 4:0:5:0: Medium Changer    IBM      03584L22         4.02 PQ: 0 ANSI: 5
May  5 11:46:38 vtl vtllibrary[25010]: spc_inquiry(): INQUIRY ** (14172)
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14173) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:38 vtl vtllibrary[25010]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14174) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:38 vtl vtllibrary[25010]: spc_mode_sense(): MODE SENSE 6 (14174) **
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14175) (delay 405): b8 04 01 01 00 01 00 00 00 ff 00 00
May  5 11:46:38 vtl vtllibrary[25010]: smc_read_element_status(): READ ELEMENT STATUS (14175) **
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14176) (delay 405): b8 04 01 02 00 01 00 00 00 ff 00 00
May  5 11:46:38 vtl vtllibrary[25010]: smc_read_element_status(): READ ELEMENT STATUS (14176) **
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14177) (delay 405): b8 04 01 03 00 01 00 00 00 ff 00 00
May  5 11:46:38 vtl vtllibrary[25010]: smc_read_element_status(): READ ELEMENT STATUS (14177) **
May  5 11:46:38 vtl kernel: ch1: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:38 vtl kernel: ch1: type #2 (st): 0x400+39 [storage]
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14178) (delay 405): b8 04 01 04 00 01 00 00 00 ff 00 00
May  5 11:46:38 vtl vtllibrary[25010]: smc_read_element_status(): READ ELEMENT STATUS (14178) **
May  5 11:46:38 vtl kernel: ch1: type #3 (ie): 0x300+4 [import/export]
May  5 11:46:38 vtl kernel: ch1: type #4 (dt): 0x101+5 [data transfer]
May  5 11:46:38 vtl kernel: ch1: dt 0x101: ID/LUN unknown
May  5 11:46:38 vtl kernel: ch1: dt 0x102: ID/LUN unknown
May  5 11:46:38 vtl kernel: ch1: dt 0x103: ID/LUN unknown
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14179) (delay 405): b8 04 01 05 00 01 00 00 00 ff 00 00
May  5 11:46:38 vtl vtllibrary[25010]: smc_read_element_status(): READ ELEMENT STATUS (14179) **
May  5 11:46:38 vtl kernel: ch1: dt 0x104: ID/LUN unknown
May  5 11:46:38 vtl kernel: ch1: dt 0x105: ID/LUN unknown
May  5 11:46:38 vtl kernel: ch1: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:38 vtl vtllibrary[25010]: CDB (14180) (delay 405): 07 00 00 00 00 00
May  5 11:46:38 vtl vtllibrary[25010]: smc_initialize_element_status(): INITIALIZE ELEMENT (14180) **
May  5 11:46:39 vtl vtllibrary[25009]: add_lu(): Child anounces 'lu [0:5:0] created'.
May  5 11:46:39 vtl kernel: ch1: ... finished
May  5 11:46:39 vtl kernel: ch 4:0:5:0: Attached scsi changer ch1
May  5 11:46:39 vtl kernel: ch 4:0:5:0: Attached scsi generic sg85 type 8
May  5 11:46:39 vtl vtllibrary[25010]: CDB (14182) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:39 vtl vtllibrary[25010]: spc_inquiry(): INQUIRY ** (14182)
May  5 11:46:39 vtl vtllibrary[25010]: CDB (14183) (delay 805): 12 01 00 00 fe 00
May  5 11:46:39 vtl vtllibrary[25010]: spc_inquiry(): INQUIRY ** (14183)
May  5 11:46:39 vtl vtllibrary[25010]: CDB (14184) (delay 405): 12 01 80 00 fe 00
May  5 11:46:39 vtl vtllibrary[25010]: spc_inquiry(): INQUIRY ** (14184)
May  5 11:46:39 vtl vtllibrary[25010]: CDB (14185) (delay 405): 12 01 83 00 fe 00
May  5 11:46:39 vtl vtllibrary[25010]: spc_inquiry(): INQUIRY ** (14185)
May  5 11:46:39 vtl vtllibrary[25010]: CDB (14186) (delay 805): 12 01 80 00 fe 00
May  5 11:46:39 vtl vtllibrary[25010]: spc_inquiry(): INQUIRY ** (14186)
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14181) (delay 40000): 12 00 00 00 24 00
May  5 11:46:39 vtl vtllibrary[25013]: spc_inquiry(): INQUIRY ** (14181)
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14187) (delay 405): 12 00 00 00 40 00
May  5 11:46:39 vtl vtllibrary[25013]: spc_inquiry(): INQUIRY ** (14187)
May  5 11:46:39 vtl kernel: scsi 4:1:0:0: Medium Changer    IBM      03584L22         4.02 PQ: 0 ANSI: 5
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14188) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:39 vtl vtllibrary[25013]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14189) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:39 vtl vtllibrary[25013]: spc_mode_sense(): MODE SENSE 6 (14189) **
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14190) (delay 405): b8 04 01 01 00 01 00 00 00 ff 00 00
May  5 11:46:39 vtl vtllibrary[25013]: smc_read_element_status(): READ ELEMENT STATUS (14190) **
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14191) (delay 405): b8 04 01 02 00 01 00 00 00 ff 00 00
May  5 11:46:39 vtl vtllibrary[25013]: smc_read_element_status(): READ ELEMENT STATUS (14191) **
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14192) (delay 405): b8 04 01 03 00 01 00 00 00 ff 00 00
May  5 11:46:39 vtl vtllibrary[25013]: smc_read_element_status(): READ ELEMENT STATUS (14192) **
May  5 11:46:39 vtl kernel: ch2: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:39 vtl kernel: ch2: type #2 (st): 0x400+100 [storage]
May  5 11:46:39 vtl kernel: ch2: type #3 (ie): 0x300+4 [import/export]
May  5 11:46:39 vtl kernel: ch2: type #4 (dt): 0x101+5 [data transfer]
May  5 11:46:39 vtl kernel: ch2: dt 0x101: ID/LUN unknown
May  5 11:46:39 vtl kernel: ch2: dt 0x102: ID/LUN unknown
May  5 11:46:39 vtl kernel: ch2: dt 0x103: ID/LUN unknown
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14193) (delay 405): b8 04 01 04 00 01 00 00 00 ff 00 00
May  5 11:46:39 vtl vtllibrary[25013]: smc_read_element_status(): READ ELEMENT STATUS (14193) **
May  5 11:46:39 vtl kernel: ch2: dt 0x104: ID/LUN unknown
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14194) (delay 805): b8 04 01 05 00 01 00 00 00 ff 00 00
May  5 11:46:39 vtl vtllibrary[25013]: smc_read_element_status(): READ ELEMENT STATUS (14194) **
May  5 11:46:39 vtl vtllibrary[25013]: CDB (14195) (delay 405): 07 00 00 00 00 00
May  5 11:46:39 vtl vtllibrary[25013]: smc_initialize_element_status(): INITIALIZE ELEMENT (14195) **
May  5 11:46:39 vtl kernel: ch2: dt 0x105: ID/LUN unknown
May  5 11:46:39 vtl kernel: ch2: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:40 vtl kernel: ch2: ... finished
May  5 11:46:40 vtl kernel: ch 4:1:0:0: Attached scsi changer ch2
May  5 11:46:40 vtl kernel: ch 4:1:0:0: Attached scsi generic sg86 type 8
May  5 11:46:40 vtl vtllibrary[25012]: add_lu(): Child anounces 'lu [1:0:0] created'.
May  5 11:46:40 vtl vtllibrary[25013]: CDB (14197) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:40 vtl vtllibrary[25013]: spc_inquiry(): INQUIRY ** (14197)
May  5 11:46:40 vtl vtllibrary[25013]: CDB (14198) (delay 805): 12 01 00 00 fe 00
May  5 11:46:40 vtl vtllibrary[25013]: spc_inquiry(): INQUIRY ** (14198)
May  5 11:46:40 vtl vtllibrary[25013]: CDB (14199) (delay 805): 12 01 80 00 fe 00
May  5 11:46:40 vtl vtllibrary[25013]: spc_inquiry(): INQUIRY ** (14199)
May  5 11:46:40 vtl vtllibrary[25013]: CDB (14200) (delay 405): 12 01 83 00 fe 00
May  5 11:46:40 vtl vtllibrary[25013]: spc_inquiry(): INQUIRY ** (14200)
May  5 11:46:40 vtl vtllibrary[25013]: CDB (14201) (delay 405): 12 01 80 00 fe 00
May  5 11:46:40 vtl vtllibrary[25013]: spc_inquiry(): INQUIRY ** (14201)
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14196) (delay 49200): 12 00 00 00 24 00
May  5 11:46:40 vtl vtllibrary[25016]: spc_inquiry(): INQUIRY ** (14196)
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14202) (delay 405): 12 00 00 00 40 00
May  5 11:46:40 vtl vtllibrary[25016]: spc_inquiry(): INQUIRY ** (14202)
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14203) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:40 vtl vtllibrary[25016]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:40 vtl kernel: scsi 4:1:2:0: Medium Changer    IBM      03584L22         4.02 PQ: 0 ANSI: 5
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14204) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:40 vtl kernel: ch3: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:40 vtl kernel: ch3: type #2 (st): 0x400+100 [storage]
May  5 11:46:40 vtl vtllibrary[25016]: spc_mode_sense(): MODE SENSE 6 (14204) **
May  5 11:46:40 vtl kernel: ch3: type #3 (ie): 0x300+5 [import/export]
May  5 11:46:40 vtl kernel: ch3: type #4 (dt): 0x101+5 [data transfer]
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14205) (delay 405): b8 04 01 01 00 01 00 00 00 ff 00 00
May  5 11:46:40 vtl vtllibrary[25016]: smc_read_element_status(): READ ELEMENT STATUS (14205) **
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14206) (delay 405): b8 04 01 02 00 01 00 00 00 ff 00 00
May  5 11:46:40 vtl vtllibrary[25016]: smc_read_element_status(): READ ELEMENT STATUS (14206) **
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14207) (delay 405): b8 04 01 03 00 01 00 00 00 ff 00 00
May  5 11:46:40 vtl vtllibrary[25016]: smc_read_element_status(): READ ELEMENT STATUS (14207) **
May  5 11:46:40 vtl kernel: ch3: dt 0x101: ID/LUN unknown
May  5 11:46:40 vtl kernel: ch3: dt 0x102: ID/LUN unknown
May  5 11:46:40 vtl kernel: ch3: dt 0x103: ID/LUN unknown
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14208) (delay 805): b8 04 01 04 00 01 00 00 00 ff 00 00
May  5 11:46:40 vtl vtllibrary[25016]: smc_read_element_status(): READ ELEMENT STATUS (14208) **
May  5 11:46:40 vtl kernel: ch3: dt 0x104: ID/LUN unknown
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14209) (delay 805): b8 04 01 05 00 01 00 00 00 ff 00 00
May  5 11:46:40 vtl vtllibrary[25016]: smc_read_element_status(): READ ELEMENT STATUS (14209) **
May  5 11:46:40 vtl vtllibrary[25016]: CDB (14210) (delay 805): 07 00 00 00 00 00
May  5 11:46:40 vtl vtllibrary[25016]: smc_initialize_element_status(): INITIALIZE ELEMENT (14210) **
May  5 11:46:40 vtl kernel: ch3: dt 0x105: ID/LUN unknown
May  5 11:46:40 vtl kernel: ch3: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:41 vtl kernel: ch3: ... finished
May  5 11:46:41 vtl kernel: ch 4:1:2:0: Attached scsi changer ch3
May  5 11:46:41 vtl kernel: ch 4:1:2:0: Attached scsi generic sg87 type 8
May  5 11:46:41 vtl vtllibrary[25015]: add_lu(): Child anounces 'lu [1:2:0] created'.
May  5 11:46:41 vtl vtllibrary[25016]: CDB (14212) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:41 vtl vtllibrary[25016]: spc_inquiry(): INQUIRY ** (14212)
May  5 11:46:41 vtl vtllibrary[25016]: CDB (14213) (delay 805): 12 01 00 00 fe 00
May  5 11:46:41 vtl vtllibrary[25016]: spc_inquiry(): INQUIRY ** (14213)
May  5 11:46:41 vtl vtllibrary[25016]: CDB (14214) (delay 405): 12 01 80 00 fe 00
May  5 11:46:41 vtl vtllibrary[25016]: spc_inquiry(): INQUIRY ** (14214)
May  5 11:46:41 vtl vtllibrary[25016]: CDB (14215) (delay 405): 12 01 83 00 fe 00
May  5 11:46:41 vtl vtllibrary[25016]: spc_inquiry(): INQUIRY ** (14215)
May  5 11:46:41 vtl vtllibrary[25016]: CDB (14216) (delay 405): 12 01 80 00 fe 00
May  5 11:46:41 vtl vtllibrary[25016]: spc_inquiry(): INQUIRY ** (14216)
May  5 11:46:41 vtl vtllibrary[25019]: CDB (14211) (delay 57200): 12 00 00 00 24 00
May  5 11:46:41 vtl vtllibrary[25019]: spc_inquiry(): INQUIRY ** (14211)
May  5 11:46:41 vtl vtllibrary[25019]: CDB (14217) (delay 405): 12 00 00 00 40 00
May  5 11:46:41 vtl vtllibrary[25019]: spc_inquiry(): INQUIRY ** (14217)
May  5 11:46:41 vtl kernel: scsi 4:2:2:0: Medium Changer    HP       MSL G3 Series    7.80 PQ: 0 ANSI: 5
May  5 11:46:41 vtl vtllibrary[25019]: CDB (14218) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:41 vtl vtllibrary[25019]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:41 vtl vtllibrary[25019]: CDB (14219) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:41 vtl vtllibrary[25019]: spc_mode_sense(): MODE SENSE 6 (14219) **
May  5 11:46:41 vtl vtllibrary[25019]: CDB (14220) (delay 805): b8 04 01 e0 00 01 00 00 00 ff 00 00
May  5 11:46:41 vtl vtllibrary[25019]: smc_read_element_status(): READ ELEMENT STATUS (14220) **
May  5 11:46:41 vtl kernel: ch4: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:41 vtl kernel: ch4: type #2 (st): 0x20+39 [storage]
May  5 11:46:41 vtl kernel: ch4: type #3 (ie): 0x1c0+4 [import/export]
May  5 11:46:41 vtl kernel: ch4: type #4 (dt): 0x1e0+4 [data transfer]
May  5 11:46:41 vtl kernel: ch4: dt 0x1e0: ID/LUN unknown
May  5 11:46:41 vtl vtllibrary[25019]: CDB (14221) (delay 805): b8 04 01 e1 00 01 00 00 00 ff 00 00
May  5 11:46:41 vtl vtllibrary[25019]: smc_read_element_status(): READ ELEMENT STATUS (14221) **
May  5 11:46:41 vtl kernel: ch4: dt 0x1e1: ID/LUN unknown
May  5 11:46:41 vtl kernel: ch4: dt 0x1e2: ID/LUN unknown
May  5 11:46:41 vtl vtllibrary[25019]: CDB (14222) (delay 405): b8 04 01 e2 00 01 00 00 00 ff 00 00
May  5 11:46:41 vtl vtllibrary[25019]: smc_read_element_status(): READ ELEMENT STATUS (14222) **
May  5 11:46:41 vtl vtllibrary[25019]: CDB (14223) (delay 405): b8 04 01 e3 00 01 00 00 00 ff 00 00
May  5 11:46:41 vtl vtllibrary[25019]: smc_read_element_status(): READ ELEMENT STATUS (14223) **
May  5 11:46:41 vtl vtllibrary[25019]: CDB (14224) (delay 405): 07 00 00 00 00 00
May  5 11:46:41 vtl vtllibrary[25019]: smc_initialize_element_status(): INITIALIZE ELEMENT (14224) **
May  5 11:46:41 vtl kernel: ch4: dt 0x1e3: ID/LUN unknown
May  5 11:46:41 vtl kernel: ch4: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:42 vtl vtllibrary[25018]: add_lu(): Child anounces 'lu [2:2:0] created'.
May  5 11:46:42 vtl kernel: ch4: ... finished
May  5 11:46:42 vtl kernel: ch 4:2:2:0: Attached scsi changer ch4
May  5 11:46:42 vtl kernel: ch 4:2:2:0: Attached scsi generic sg88 type 8
May  5 11:46:42 vtl vtllibrary[25019]: CDB (14226) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:42 vtl vtllibrary[25019]: spc_inquiry(): INQUIRY ** (14226)
May  5 11:46:42 vtl vtllibrary[25019]: CDB (14227) (delay 805): 12 01 00 00 fe 00
May  5 11:46:42 vtl vtllibrary[25019]: spc_inquiry(): INQUIRY ** (14227)
May  5 11:46:42 vtl vtllibrary[25019]: CDB (14228) (delay 805): 12 01 80 00 fe 00
May  5 11:46:42 vtl vtllibrary[25019]: spc_inquiry(): INQUIRY ** (14228)
May  5 11:46:42 vtl vtllibrary[25019]: CDB (14229) (delay 805): 12 01 83 00 fe 00
May  5 11:46:42 vtl vtllibrary[25019]: spc_inquiry(): INQUIRY ** (14229)
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14225) (delay 64000): 12 00 00 00 24 00
May  5 11:46:42 vtl vtllibrary[25022]: spc_inquiry(): INQUIRY ** (14225)
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14230) (delay 805): 12 00 00 00 40 00
May  5 11:46:42 vtl vtllibrary[25022]: spc_inquiry(): INQUIRY ** (14230)
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14231) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:42 vtl vtllibrary[25022]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14232) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:42 vtl vtllibrary[25022]: spc_mode_sense(): MODE SENSE 6 (14232) **
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14233) (delay 405): b8 04 01 01 00 01 00 00 00 ff 00 00
May  5 11:46:42 vtl vtllibrary[25022]: smc_read_element_status(): READ ELEMENT STATUS (14233) **
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14234) (delay 405): b8 04 01 02 00 01 00 00 00 ff 00 00
May  5 11:46:42 vtl vtllibrary[25022]: smc_read_element_status(): READ ELEMENT STATUS (14234) **
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14235) (delay 405): b8 04 01 03 00 01 00 00 00 ff 00 00
May  5 11:46:42 vtl vtllibrary[25022]: smc_read_element_status(): READ ELEMENT STATUS (14235) **
May  5 11:46:42 vtl kernel: scsi 4:2:3:0: Medium Changer    IBM      03584L22         4.02 PQ: 0 ANSI: 5
May  5 11:46:42 vtl kernel: ch5: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:42 vtl kernel: ch5: type #2 (st): 0x400+49 [storage]
May  5 11:46:42 vtl kernel: ch5: type #3 (ie): 0x300+4 [import/export]
May  5 11:46:42 vtl kernel: ch5: type #4 (dt): 0x101+5 [data transfer]
May  5 11:46:42 vtl kernel: ch5: dt 0x101: ID/LUN unknown
May  5 11:46:42 vtl kernel: ch5: dt 0x102: ID/LUN unknown
May  5 11:46:42 vtl kernel: ch5: dt 0x103: ID/LUN unknown
May  5 11:46:42 vtl kernel: ch5: dt 0x104: ID/LUN unknown
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14236) (delay 405): b8 04 01 04 00 01 00 00 00 ff 00 00
May  5 11:46:42 vtl vtllibrary[25022]: smc_read_element_status(): READ ELEMENT STATUS (14236) **
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14237) (delay 405): b8 04 01 05 00 01 00 00 00 ff 00 00
May  5 11:46:42 vtl vtllibrary[25022]: smc_read_element_status(): READ ELEMENT STATUS (14237) **
May  5 11:46:42 vtl vtllibrary[25022]: CDB (14238) (delay 405): 07 00 00 00 00 00
May  5 11:46:42 vtl vtllibrary[25022]: smc_initialize_element_status(): INITIALIZE ELEMENT (14238) **
May  5 11:46:42 vtl kernel: ch5: dt 0x105: ID/LUN unknown
May  5 11:46:42 vtl kernel: ch5: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:43 vtl kernel: ch5: ... finished
May  5 11:46:43 vtl kernel: ch 4:2:3:0: Attached scsi changer ch5
May  5 11:46:43 vtl kernel: ch 4:2:3:0: Attached scsi generic sg89 type 8
May  5 11:46:43 vtl vtllibrary[25021]: add_lu(): Child anounces 'lu [2:3:0] created'.
May  5 11:46:43 vtl vtllibrary[25022]: CDB (14240) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:43 vtl vtllibrary[25022]: spc_inquiry(): INQUIRY ** (14240)
May  5 11:46:43 vtl vtllibrary[25022]: CDB (14241) (delay 805): 12 01 00 00 fe 00
May  5 11:46:43 vtl vtllibrary[25022]: spc_inquiry(): INQUIRY ** (14241)
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14239) (delay 70000): 12 00 00 00 24 00
May  5 11:46:43 vtl vtllibrary[25025]: spc_inquiry(): INQUIRY ** (14239)
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14243) (delay 405): 12 00 00 00 40 00
May  5 11:46:43 vtl vtllibrary[25022]: CDB (14242) (delay 405): 12 01 80 00 fe 00
May  5 11:46:43 vtl vtllibrary[25025]: spc_inquiry(): INQUIRY ** (14243)
May  5 11:46:43 vtl vtllibrary[25022]: spc_inquiry(): INQUIRY ** (14242)
May  5 11:46:43 vtl kernel: scsi 4:0:9:0: Medium Changer    STK      L700             0105 PQ: 0 ANSI: 5
May  5 11:46:43 vtl vtllibrary[25022]: CDB (14244) (delay 805): 12 01 83 00 fe 00
May  5 11:46:43 vtl vtllibrary[25022]: spc_inquiry(): INQUIRY ** (14244)
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14245) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:43 vtl vtllibrary[25025]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14247) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:43 vtl vtllibrary[25025]: spc_mode_sense(): MODE SENSE 6 (14247) **
May  5 11:46:43 vtl vtllibrary[25022]: CDB (14246) (delay 805): 12 01 80 00 fe 00
May  5 11:46:43 vtl vtllibrary[25022]: spc_inquiry(): INQUIRY ** (14246)
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14248) (delay 405): b8 04 01 f0 00 01 00 00 00 ff 00 00
May  5 11:46:43 vtl vtllibrary[25025]: smc_read_element_status(): READ ELEMENT STATUS (14248) **
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14249) (delay 405): b8 04 01 f1 00 01 00 00 00 ff 00 00
May  5 11:46:43 vtl vtllibrary[25025]: smc_read_element_status(): READ ELEMENT STATUS (14249) **
May  5 11:46:43 vtl kernel: ch6: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:43 vtl kernel: ch6: type #2 (st): 0x400+39 [storage]
May  5 11:46:43 vtl kernel: ch6: type #3 (ie): 0x10+4 [import/export]
May  5 11:46:43 vtl kernel: ch6: type #4 (dt): 0x1f0+6 [data transfer]
May  5 11:46:43 vtl kernel: ch6: dt 0x1f0: ID/LUN unknown
May  5 11:46:43 vtl kernel: ch6: dt 0x1f1: ID/LUN unknown
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14250) (delay 405): b8 04 01 f2 00 01 00 00 00 ff 00 00
May  5 11:46:43 vtl vtllibrary[25025]: smc_read_element_status(): READ ELEMENT STATUS (14250) **
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14251) (delay 405): b8 04 01 f3 00 01 00 00 00 ff 00 00
May  5 11:46:43 vtl vtllibrary[25025]: smc_read_element_status(): READ ELEMENT STATUS (14251) **
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14252) (delay 405): b8 04 01 f4 00 01 00 00 00 ff 00 00
May  5 11:46:43 vtl vtllibrary[25025]: smc_read_element_status(): READ ELEMENT STATUS (14252) **
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14253) (delay 405): b8 04 01 f5 00 01 00 00 00 ff 00 00
May  5 11:46:43 vtl vtllibrary[25025]: smc_read_element_status(): READ ELEMENT STATUS (14253) **
May  5 11:46:43 vtl vtllibrary[25025]: CDB (14254) (delay 405): 07 00 00 00 00 00
May  5 11:46:43 vtl vtllibrary[25025]: smc_initialize_element_status(): INITIALIZE ELEMENT (14254) **
May  5 11:46:43 vtl kernel: ch6: dt 0x1f2: ID/LUN unknown
May  5 11:46:43 vtl kernel: ch6: dt 0x1f3: ID/LUN unknown
May  5 11:46:43 vtl kernel: ch6: dt 0x1f4: ID/LUN unknown
May  5 11:46:43 vtl kernel: ch6: dt 0x1f5: ID/LUN unknown
May  5 11:46:43 vtl kernel: ch6: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:44 vtl kernel: ch6: ... finished
May  5 11:46:44 vtl kernel: ch 4:0:9:0: Attached scsi changer ch6
May  5 11:46:44 vtl kernel: ch 4:0:9:0: Attached scsi generic sg90 type 8
May  5 11:46:44 vtl vtllibrary[25024]: add_lu(): Child anounces 'lu [0:9:0] created'.
May  5 11:46:44 vtl vtllibrary[25025]: CDB (14256) (delay 805): 12 00 00 00 fe 00
May  5 11:46:44 vtl vtllibrary[25025]: spc_inquiry(): INQUIRY ** (14256)
May  5 11:46:44 vtl vtllibrary[25025]: CDB (14257) (delay 805): 12 01 00 00 fe 00
May  5 11:46:44 vtl vtllibrary[25025]: spc_inquiry(): INQUIRY ** (14257)
May  5 11:46:44 vtl vtllibrary[25025]: CDB (14258) (delay 805): 12 01 80 00 fe 00
May  5 11:46:44 vtl vtllibrary[25025]: spc_inquiry(): INQUIRY ** (14258)
May  5 11:46:44 vtl vtllibrary[25028]: CDB (14255) (delay 75600): 12 00 00 00 24 00
May  5 11:46:44 vtl vtllibrary[25028]: spc_inquiry(): INQUIRY ** (14255)
May  5 11:46:44 vtl vtllibrary[25028]: CDB (14259) (delay 405): 12 00 00 00 40 00
May  5 11:46:44 vtl vtllibrary[25028]: spc_inquiry(): INQUIRY ** (14259)
May  5 11:46:44 vtl vtllibrary[25028]: CDB (14260) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:44 vtl vtllibrary[25028]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:44 vtl kernel: scsi 4:4:0:0: Medium Changer    QUANTUM  Scalar i6000     601A PQ: 0 ANSI: 5
May  5 11:46:44 vtl vtllibrary[25028]: CDB (14261) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:44 vtl vtllibrary[25028]: spc_mode_sense(): MODE SENSE 6 (14261) **
May  5 11:46:44 vtl kernel: ch7: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:44 vtl kernel: ch7: type #2 (st): 0x1000+39 [storage]
May  5 11:46:44 vtl kernel: ch7: type #3 (ie): 0x10+4 [import/export]
May  5 11:46:44 vtl kernel: ch7: type #4 (dt): 0x100+4 [data transfer]
May  5 11:46:44 vtl vtllibrary[25028]: CDB (14262) (delay 805): b8 04 01 00 00 01 00 00 00 ff 00 00
May  5 11:46:44 vtl vtllibrary[25028]: smc_read_element_status(): READ ELEMENT STATUS (14262) **
May  5 11:46:44 vtl kernel: ch7: dt 0x100: ID/LUN unknown
May  5 11:46:44 vtl kernel: ch7: dt 0x101: ID/LUN unknown
May  5 11:46:44 vtl vtllibrary[25028]: CDB (14263) (delay 405): b8 04 01 01 00 01 00 00 00 ff 00 00
May  5 11:46:44 vtl vtllibrary[25028]: smc_read_element_status(): READ ELEMENT STATUS (14263) **
May  5 11:46:44 vtl vtllibrary[25028]: CDB (14264) (delay 405): b8 04 01 02 00 01 00 00 00 ff 00 00
May  5 11:46:44 vtl vtllibrary[25028]: smc_read_element_status(): READ ELEMENT STATUS (14264) **
May  5 11:46:44 vtl vtllibrary[25028]: CDB (14265) (delay 405): b8 04 01 03 00 01 00 00 00 ff 00 00
May  5 11:46:44 vtl vtllibrary[25028]: smc_read_element_status(): READ ELEMENT STATUS (14265) **
May  5 11:46:44 vtl vtllibrary[25028]: CDB (14266) (delay 405): 07 00 00 00 00 00
May  5 11:46:44 vtl vtllibrary[25028]: smc_initialize_element_status(): INITIALIZE ELEMENT (14266) **
May  5 11:46:44 vtl kernel: ch7: dt 0x102: ID/LUN unknown
May  5 11:46:44 vtl kernel: ch7: dt 0x103: ID/LUN unknown
May  5 11:46:44 vtl kernel: ch7: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:45 vtl vtllibrary[25027]: add_lu(): Child anounces 'lu [4:0:0] created'.
May  5 11:46:45 vtl kernel: ch7: ... finished
May  5 11:46:45 vtl kernel: ch 4:4:0:0: Attached scsi changer ch7
May  5 11:46:45 vtl kernel: ch 4:4:0:0: Attached scsi generic sg91 type 8
May  5 11:46:45 vtl vtllibrary[25028]: CDB (14268) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:45 vtl vtllibrary[25028]: spc_inquiry(): INQUIRY ** (14268)
May  5 11:46:45 vtl vtllibrary[25028]: CDB (14269) (delay 405): 12 01 00 00 fe 00
May  5 11:46:45 vtl vtllibrary[25028]: spc_inquiry(): INQUIRY ** (14269)
May  5 11:46:45 vtl vtllibrary[25028]: CDB (14270) (delay 405): 12 01 80 00 fe 00
May  5 11:46:45 vtl vtllibrary[25028]: spc_inquiry(): INQUIRY ** (14270)
May  5 11:46:45 vtl vtllibrary[25028]: CDB (14271) (delay 405): 12 01 83 00 fe 00
May  5 11:46:45 vtl vtllibrary[25028]: spc_inquiry(): INQUIRY ** (14271)
May  5 11:46:45 vtl vtllibrary[25031]: CDB (14267) (delay 80800): 12 00 00 00 24 00
May  5 11:46:45 vtl vtllibrary[25031]: spc_inquiry(): INQUIRY ** (14267)
May  5 11:46:45 vtl vtllibrary[25031]: CDB (14272) (delay 405): 12 00 00 00 40 00
May  5 11:46:45 vtl vtllibrary[25031]: spc_inquiry(): INQUIRY ** (14272)
May  5 11:46:45 vtl kernel: scsi 4:5:0:0: Medium Changer    IBM      03584L32         4.02 PQ: 0 ANSI: 5
May  5 11:46:45 vtl vtllibrary[25031]: CDB (14273) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:45 vtl vtllibrary[25031]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:45 vtl vtllibrary[25031]: CDB (14274) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:45 vtl vtllibrary[25031]: spc_mode_sense(): MODE SENSE 6 (14274) **
May  5 11:46:45 vtl kernel: ch8: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:45 vtl kernel: ch8: type #2 (st): 0x400+39 [storage]
May  5 11:46:45 vtl kernel: ch8: type #3 (ie): 0x300+4 [import/export]
May  5 11:46:45 vtl kernel: ch8: type #4 (dt): 0x101+4 [data transfer]
May  5 11:46:45 vtl vtllibrary[25031]: CDB (14275) (delay 405): b8 04 01 01 00 01 00 00 00 ff 00 00
May  5 11:46:45 vtl vtllibrary[25031]: smc_read_element_status(): READ ELEMENT STATUS (14275) **
May  5 11:46:45 vtl vtllibrary[25031]: CDB (14276) (delay 405): b8 04 01 02 00 01 00 00 00 ff 00 00
May  5 11:46:45 vtl vtllibrary[25031]: smc_read_element_status(): READ ELEMENT STATUS (14276) **
May  5 11:46:45 vtl vtllibrary[25031]: CDB (14277) (delay 405): b8 04 01 03 00 01 00 00 00 ff 00 00
May  5 11:46:45 vtl vtllibrary[25031]: smc_read_element_status(): READ ELEMENT STATUS (14277) **
May  5 11:46:45 vtl vtllibrary[25031]: CDB (14278) (delay 405): b8 04 01 04 00 01 00 00 00 ff 00 00
May  5 11:46:45 vtl vtllibrary[25031]: smc_read_element_status(): READ ELEMENT STATUS (14278) **
May  5 11:46:45 vtl vtllibrary[25031]: CDB (14279) (delay 405): 07 00 00 00 00 00
May  5 11:46:45 vtl vtllibrary[25031]: smc_initialize_element_status(): INITIALIZE ELEMENT (14279) **
May  5 11:46:45 vtl kernel: ch8: dt 0x101: ID/LUN unknown
May  5 11:46:45 vtl kernel: ch8: dt 0x102: ID/LUN unknown
May  5 11:46:45 vtl kernel: ch8: dt 0x103: ID/LUN unknown
May  5 11:46:45 vtl kernel: ch8: dt 0x104: ID/LUN unknown
May  5 11:46:45 vtl kernel: ch8: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:46 vtl kernel: ch8: ... finished
May  5 11:46:46 vtl kernel: ch 4:5:0:0: Attached scsi changer ch8
May  5 11:46:46 vtl kernel: ch 4:5:0:0: Attached scsi generic sg92 type 8
May  5 11:46:46 vtl vtllibrary[25030]: add_lu(): Child anounces 'lu [5:0:0] created'.
May  5 11:46:46 vtl vtllibrary[25031]: CDB (14281) (delay 805): 12 00 00 00 fe 00
May  5 11:46:46 vtl vtllibrary[25031]: spc_inquiry(): INQUIRY ** (14281)
May  5 11:46:46 vtl vtllibrary[25031]: CDB (14282) (delay 405): 12 01 00 00 fe 00
May  5 11:46:46 vtl vtllibrary[25031]: spc_inquiry(): INQUIRY ** (14282)
May  5 11:46:46 vtl vtllibrary[25031]: CDB (14283) (delay 405): 12 01 80 00 fe 00
May  5 11:46:46 vtl vtllibrary[25031]: spc_inquiry(): INQUIRY ** (14283)
May  5 11:46:46 vtl vtllibrary[25031]: CDB (14284) (delay 405): 12 01 83 00 fe 00
May  5 11:46:46 vtl vtllibrary[25031]: spc_inquiry(): INQUIRY ** (14284)
May  5 11:46:46 vtl vtllibrary[25031]: CDB (14285) (delay 405): 12 01 80 00 fe 00
May  5 11:46:46 vtl vtllibrary[25031]: spc_inquiry(): INQUIRY ** (14285)
May  5 11:46:46 vtl vtllibrary[25034]: CDB (14280) (delay 86000): 12 00 00 00 24 00
May  5 11:46:46 vtl vtllibrary[25034]: spc_inquiry(): INQUIRY ** (14280)
May  5 11:46:46 vtl vtllibrary[25034]: CDB (14286) (delay 405): 12 00 00 00 40 00
May  5 11:46:46 vtl vtllibrary[25034]: spc_inquiry(): INQUIRY ** (14286)
May  5 11:46:46 vtl kernel: scsi 4:5:3:0: Medium Changer    HP       MSL6000 Series   2.00 PQ: 0 ANSI: 5
May  5 11:46:46 vtl vtllibrary[25034]: CDB (14287) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:46 vtl vtllibrary[25034]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:46 vtl vtllibrary[25034]: CDB (14288) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:46 vtl vtllibrary[25034]: spc_mode_sense(): MODE SENSE 6 (14288) **
May  5 11:46:46 vtl vtllibrary[25034]: CDB (14289) (delay 405): b8 04 01 e0 00 01 00 00 00 ff 00 00
May  5 11:46:46 vtl vtllibrary[25034]: smc_read_element_status(): READ ELEMENT STATUS (14289) **
May  5 11:46:46 vtl kernel: ch9: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:46 vtl kernel: ch9: type #2 (st): 0x20+40 [storage]
May  5 11:46:46 vtl kernel: ch9: type #3 (ie): 0x1c0+4 [import/export]
May  5 11:46:46 vtl kernel: ch9: type #4 (dt): 0x1e0+4 [data transfer]
May  5 11:46:46 vtl kernel: ch9: dt 0x1e0: ID/LUN unknown
May  5 11:46:46 vtl kernel: ch9: dt 0x1e1: ID/LUN unknown
May  5 11:46:46 vtl vtllibrary[25034]: CDB (14290) (delay 805): b8 04 01 e1 00 01 00 00 00 ff 00 00
May  5 11:46:46 vtl kernel: ch9: dt 0x1e2: ID/LUN unknown
May  5 11:46:46 vtl vtllibrary[25034]: smc_read_element_status(): READ ELEMENT STATUS (14290) **
May  5 11:46:46 vtl vtllibrary[25034]: CDB (14291) (delay 405): b8 04 01 e2 00 01 00 00 00 ff 00 00
May  5 11:46:46 vtl vtllibrary[25034]: smc_read_element_status(): READ ELEMENT STATUS (14291) **
May  5 11:46:46 vtl vtllibrary[25034]: CDB (14292) (delay 405): b8 04 01 e3 00 01 00 00 00 ff 00 00
May  5 11:46:46 vtl vtllibrary[25034]: smc_read_element_status(): READ ELEMENT STATUS (14292) **
May  5 11:46:46 vtl vtllibrary[25034]: CDB (14293) (delay 405): 07 00 00 00 00 00
May  5 11:46:46 vtl vtllibrary[25034]: smc_initialize_element_status(): INITIALIZE ELEMENT (14293) **
May  5 11:46:46 vtl kernel: ch9: dt 0x1e3: ID/LUN unknown
May  5 11:46:46 vtl kernel: ch9: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:47 vtl kernel: ch9: ... finished
May  5 11:46:47 vtl kernel: ch 4:5:3:0: Attached scsi changer ch9
May  5 11:46:47 vtl kernel: ch 4:5:3:0: Attached scsi generic sg93 type 8
May  5 11:46:47 vtl vtllibrary[25033]: add_lu(): Child anounces 'lu [5:3:0] created'.
May  5 11:46:47 vtl vtllibrary[25034]: CDB (14295) (delay 805): 12 00 00 00 fe 00
May  5 11:46:47 vtl vtllibrary[25034]: spc_inquiry(): INQUIRY ** (14295)
May  5 11:46:47 vtl vtllibrary[25034]: CDB (14296) (delay 805): 12 01 00 00 fe 00
May  5 11:46:47 vtl vtllibrary[25034]: spc_inquiry(): INQUIRY ** (14296)
May  5 11:46:47 vtl vtllibrary[25034]: CDB (14297) (delay 405): 12 01 80 00 fe 00
May  5 11:46:47 vtl vtllibrary[25034]: spc_inquiry(): INQUIRY ** (14297)
May  5 11:46:47 vtl vtllibrary[25034]: CDB (14298) (delay 405): 12 01 83 00 fe 00
May  5 11:46:47 vtl vtllibrary[25034]: spc_inquiry(): INQUIRY ** (14298)
May  5 11:46:47 vtl vtllibrary[25037]: CDB (14294) (delay 90800): 12 00 00 00 24 00
May  5 11:46:47 vtl vtllibrary[25037]: spc_inquiry(): INQUIRY ** (14294)
May  5 11:46:47 vtl vtllibrary[25037]: CDB (14299) (delay 805): 12 00 00 00 40 00
May  5 11:46:47 vtl vtllibrary[25037]: spc_inquiry(): INQUIRY ** (14299)
May  5 11:46:47 vtl vtllibrary[25037]: CDB (14300) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:47 vtl vtllibrary[25037]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:47 vtl kernel: scsi 4:8:0:0: Medium Changer    ADIC     Scalar i2000     500A PQ: 0 ANSI: 5
May  5 11:46:47 vtl vtllibrary[25037]: CDB (14301) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:47 vtl vtllibrary[25037]: spc_mode_sense(): MODE SENSE 6 (14301) **
May  5 11:46:47 vtl vtllibrary[25037]: CDB (14302) (delay 405): b8 04 01 00 00 01 00 00 00 ff 00 00
May  5 11:46:47 vtl vtllibrary[25037]: smc_read_element_status(): READ ELEMENT STATUS (14302) **
May  5 11:46:47 vtl vtllibrary[25037]: CDB (14303) (delay 405): b8 04 01 01 00 01 00 00 00 ff 00 00
May  5 11:46:47 vtl vtllibrary[25037]: smc_read_element_status(): READ ELEMENT STATUS (14303) **
May  5 11:46:47 vtl vtllibrary[25037]: CDB (14304) (delay 405): b8 04 01 02 00 01 00 00 00 ff 00 00
May  5 11:46:47 vtl vtllibrary[25037]: smc_read_element_status(): READ ELEMENT STATUS (14304) **
May  5 11:46:47 vtl kernel: ch10: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:47 vtl kernel: ch10: type #2 (st): 0x1000+100 [storage]
May  5 11:46:47 vtl kernel: ch10: type #3 (ie): 0x10+4 [import/export]
May  5 11:46:47 vtl kernel: ch10: type #4 (dt): 0x100+4 [data transfer]
May  5 11:46:47 vtl kernel: ch10: dt 0x100: ID/LUN unknown
May  5 11:46:47 vtl kernel: ch10: dt 0x101: ID/LUN unknown
May  5 11:46:47 vtl kernel: ch10: dt 0x102: ID/LUN unknown
May  5 11:46:47 vtl vtllibrary[25037]: CDB (14305) (delay 805): b8 04 01 03 00 01 00 00 00 ff 00 00
May  5 11:46:47 vtl vtllibrary[25037]: smc_read_element_status(): READ ELEMENT STATUS (14305) **
May  5 11:46:47 vtl kernel: ch10: dt 0x103: ID/LUN unknown
May  5 11:46:47 vtl kernel: ch10: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:47 vtl vtllibrary[25037]: CDB (14306) (delay 805): 07 00 00 00 00 00
May  5 11:46:47 vtl vtllibrary[25037]: smc_initialize_element_status(): INITIALIZE ELEMENT (14306) **
May  5 11:46:48 vtl kernel: ch10: ... finished
May  5 11:46:48 vtl kernel: ch 4:8:0:0: Attached scsi changer ch10
May  5 11:46:48 vtl kernel: ch 4:8:0:0: Attached scsi generic sg94 type 8
May  5 11:46:48 vtl vtllibrary[25036]: add_lu(): Child anounces 'lu [8:0:0] created'.
May  5 11:46:48 vtl vtllibrary[25037]: CDB (14308) (delay 1605): 12 00 00 00 fe 00
May  5 11:46:48 vtl vtllibrary[25037]: spc_inquiry(): INQUIRY ** (14308)
May  5 11:46:48 vtl vtllibrary[25037]: CDB (14309) (delay 805): 12 01 00 00 fe 00
May  5 11:46:48 vtl vtllibrary[25037]: spc_inquiry(): INQUIRY ** (14309)
May  5 11:46:48 vtl vtllibrary[25037]: CDB (14310) (delay 805): 12 01 80 00 fe 00
May  5 11:46:48 vtl vtllibrary[25037]: spc_inquiry(): INQUIRY ** (14310)
May  5 11:46:48 vtl vtllibrary[25037]: CDB (14311) (delay 805): 12 01 83 00 fe 00
May  5 11:46:48 vtl vtllibrary[25037]: spc_inquiry(): INQUIRY ** (14311)
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14307) (delay 95200): 12 00 00 00 24 00
May  5 11:46:48 vtl vtllibrary[25040]: spc_inquiry(): INQUIRY ** (14307)
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14312) (delay 405): 12 00 00 00 40 00
May  5 11:46:48 vtl vtllibrary[25040]: spc_inquiry(): INQUIRY ** (14312)
May  5 11:46:48 vtl kernel: scsi 4:9:0:0: Medium Changer    STK      L180             0016 PQ: 0 ANSI: 5
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14313) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:48 vtl vtllibrary[25040]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14314) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:48 vtl vtllibrary[25040]: spc_mode_sense(): MODE SENSE 6 (14314) **
May  5 11:46:48 vtl kernel: ch11: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:48 vtl kernel: ch11: type #2 (st): 0x400+100 [storage]
May  5 11:46:48 vtl kernel: ch11: type #3 (ie): 0x10+6 [import/export]
May  5 11:46:48 vtl kernel: ch11: type #4 (dt): 0x1f0+6 [data transfer]
May  5 11:46:48 vtl kernel: ch11: dt 0x1f0: ID/LUN unknown
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14315) (delay 405): b8 04 01 f0 00 01 00 00 00 ff 00 00
May  5 11:46:48 vtl vtllibrary[25040]: smc_read_element_status(): READ ELEMENT STATUS (14315) **
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14316) (delay 405): b8 04 01 f1 00 01 00 00 00 ff 00 00
May  5 11:46:48 vtl vtllibrary[25040]: smc_read_element_status(): READ ELEMENT STATUS (14316) **
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14317) (delay 405): b8 04 01 f2 00 01 00 00 00 ff 00 00
May  5 11:46:48 vtl vtllibrary[25040]: smc_read_element_status(): READ ELEMENT STATUS (14317) **
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14318) (delay 405): b8 04 01 f3 00 01 00 00 00 ff 00 00
May  5 11:46:48 vtl vtllibrary[25040]: smc_read_element_status(): READ ELEMENT STATUS (14318) **
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14319) (delay 405): b8 04 01 f4 00 01 00 00 00 ff 00 00
May  5 11:46:48 vtl vtllibrary[25040]: smc_read_element_status(): READ ELEMENT STATUS (14319) **
May  5 11:46:48 vtl kernel: ch11: dt 0x1f1: ID/LUN unknown
May  5 11:46:48 vtl kernel: ch11: dt 0x1f2: ID/LUN unknown
May  5 11:46:48 vtl kernel: ch11: dt 0x1f3: ID/LUN unknown
May  5 11:46:48 vtl kernel: ch11: dt 0x1f4: ID/LUN unknown
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14320) (delay 405): b8 04 01 f5 00 01 00 00 00 ff 00 00
May  5 11:46:48 vtl vtllibrary[25040]: smc_read_element_status(): READ ELEMENT STATUS (14320) **
May  5 11:46:48 vtl vtllibrary[25040]: CDB (14321) (delay 405): 07 00 00 00 00 00
May  5 11:46:48 vtl vtllibrary[25040]: smc_initialize_element_status(): INITIALIZE ELEMENT (14321) **
May  5 11:46:48 vtl kernel: ch11: dt 0x1f5: ID/LUN unknown
May  5 11:46:48 vtl kernel: ch11: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:49 vtl vtllibrary[25039]: add_lu(): Child anounces 'lu [9:0:0] created'.
May  5 11:46:49 vtl kernel: ch11: ... finished
May  5 11:46:49 vtl kernel: ch 4:9:0:0: Attached scsi changer ch11
May  5 11:46:49 vtl kernel: ch 4:9:0:0: Attached scsi generic sg95 type 8
May  5 11:46:49 vtl vtllibrary[25040]: CDB (14323) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:49 vtl vtllibrary[25040]: spc_inquiry(): INQUIRY ** (14323)
May  5 11:46:49 vtl vtllibrary[25040]: CDB (14324) (delay 805): 12 01 00 00 fe 00
May  5 11:46:49 vtl vtllibrary[25040]: spc_inquiry(): INQUIRY ** (14324)
May  5 11:46:49 vtl vtllibrary[25040]: CDB (14325) (delay 405): 12 01 80 00 fe 00
May  5 11:46:49 vtl vtllibrary[25040]: spc_inquiry(): INQUIRY ** (14325)
May  5 11:46:49 vtl vtllibrary[25043]: CDB (14322) (delay 99600): 12 00 00 00 24 00
May  5 11:46:49 vtl vtllibrary[25043]: spc_inquiry(): INQUIRY ** (14322)
May  5 11:46:49 vtl vtllibrary[25043]: CDB (14326) (delay 1205): 12 00 00 00 40 00
May  5 11:46:49 vtl vtllibrary[25043]: spc_inquiry(): INQUIRY ** (14326)
May  5 11:46:49 vtl kernel: scsi 4:11:0:0: Medium Changer    HP       EML E-Series     1068 PQ: 0 ANSI: 5
May  5 11:46:49 vtl vtllibrary[25043]: CDB (14327) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:49 vtl vtllibrary[25043]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:49 vtl vtllibrary[25043]: CDB (14328) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:49 vtl vtllibrary[25043]: spc_mode_sense(): MODE SENSE 6 (14328) **
May  5 11:46:49 vtl vtllibrary[25043]: CDB (14329) (delay 805): b8 04 01 f4 00 01 00 00 00 ff 00 00
May  5 11:46:49 vtl vtllibrary[25043]: smc_read_element_status(): READ ELEMENT STATUS (14329) **
May  5 11:46:49 vtl vtllibrary[25043]: CDB (14330) (delay 405): b8 04 01 f5 00 01 00 00 00 ff 00 00
May  5 11:46:49 vtl kernel: ch12: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:49 vtl vtllibrary[25043]: smc_read_element_status(): READ ELEMENT STATUS (14330) **
May  5 11:46:49 vtl kernel: ch12: type #2 (st): 0x3e8+99 [storage]
May  5 11:46:49 vtl kernel: ch12: type #3 (ie): 0xa+4 [import/export]
May  5 11:46:49 vtl kernel: ch12: type #4 (dt): 0x1f4+4 [data transfer]
May  5 11:46:49 vtl kernel: ch12: dt 0x1f4: ID/LUN unknown
May  5 11:46:49 vtl kernel: ch12: dt 0x1f5: ID/LUN unknown
May  5 11:46:49 vtl vtllibrary[25043]: CDB (14331) (delay 405): b8 04 01 f6 00 01 00 00 00 ff 00 00
May  5 11:46:49 vtl vtllibrary[25043]: smc_read_element_status(): READ ELEMENT STATUS (14331) **
May  5 11:46:49 vtl vtllibrary[25043]: CDB (14332) (delay 805): b8 04 01 f7 00 01 00 00 00 ff 00 00
May  5 11:46:49 vtl vtllibrary[25043]: smc_read_element_status(): READ ELEMENT STATUS (14332) **
May  5 11:46:49 vtl kernel: ch12: dt 0x1f6: ID/LUN unknown
May  5 11:46:49 vtl kernel: ch12: dt 0x1f7: ID/LUN unknown
May  5 11:46:49 vtl kernel: ch12: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:49 vtl vtllibrary[25043]: CDB (14333) (delay 1205): 07 00 00 00 00 00
May  5 11:46:49 vtl vtllibrary[25043]: smc_initialize_element_status(): INITIALIZE ELEMENT (14333) **
May  5 11:46:50 vtl kernel: ch12: ... finished
May  5 11:46:50 vtl kernel: ch 4:11:0:0: Attached scsi changer ch12
May  5 11:46:50 vtl kernel: ch 4:11:0:0: Attached scsi generic sg96 type 8
May  5 11:46:50 vtl vtllibrary[25042]: add_lu(): Child anounces 'lu [11:0:0] created'.
May  5 11:46:50 vtl vtllibrary[25043]: CDB (14335) (delay 2005): 12 00 00 00 fe 00
May  5 11:46:50 vtl vtllibrary[25043]: spc_inquiry(): INQUIRY ** (14335)
May  5 11:46:50 vtl vtllibrary[25043]: CDB (14336) (delay 805): 12 01 00 00 fe 00
May  5 11:46:50 vtl vtllibrary[25043]: spc_inquiry(): INQUIRY ** (14336)
May  5 11:46:50 vtl vtllibrary[25043]: CDB (14337) (delay 405): 12 01 80 00 fe 00
May  5 11:46:50 vtl vtllibrary[25043]: spc_inquiry(): INQUIRY ** (14337)
May  5 11:46:50 vtl vtllibrary[25043]: CDB (14338) (delay 405): 12 01 83 00 fe 00
May  5 11:46:50 vtl vtllibrary[25043]: spc_inquiry(): INQUIRY ** (14338)
May  5 11:46:51 vtl vtllibrary[25046]: CDB (14334) (delay 104000): 12 00 00 00 24 00
May  5 11:46:51 vtl vtllibrary[25046]: spc_inquiry(): INQUIRY ** (14334)
May  5 11:46:51 vtl vtllibrary[25046]: CDB (14339) (delay 805): 12 00 00 00 40 00
May  5 11:46:51 vtl vtllibrary[25046]: spc_inquiry(): INQUIRY ** (14339)
May  5 11:46:51 vtl vtllibrary[25046]: CDB (14340) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:51 vtl vtllibrary[25046]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:51 vtl kernel: scsi 4:12:0:0: Medium Changer    IBM      03584L32         4.02 PQ: 0 ANSI: 5
May  5 11:46:51 vtl vtllibrary[25046]: CDB (14341) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:51 vtl vtllibrary[25046]: spc_mode_sense(): MODE SENSE 6 (14341) **
May  5 11:46:51 vtl vtllibrary[25046]: CDB (14342) (delay 405): b8 04 01 01 00 01 00 00 00 ff 00 00
May  5 11:46:51 vtl vtllibrary[25046]: smc_read_element_status(): READ ELEMENT STATUS (14342) **
May  5 11:46:51 vtl kernel: ch13: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:51 vtl kernel: ch13: type #2 (st): 0x400+100 [storage]
May  5 11:46:51 vtl kernel: ch13: type #3 (ie): 0x300+4 [import/export]
May  5 11:46:51 vtl kernel: ch13: type #4 (dt): 0x101+4 [data transfer]
May  5 11:46:51 vtl kernel: ch13: dt 0x101: ID/LUN unknown
May  5 11:46:51 vtl vtllibrary[25046]: CDB (14343) (delay 805): b8 04 01 02 00 01 00 00 00 ff 00 00
May  5 11:46:51 vtl vtllibrary[25046]: smc_read_element_status(): READ ELEMENT STATUS (14343) **
May  5 11:46:51 vtl vtllibrary[25046]: CDB (14344) (delay 405): b8 04 01 03 00 01 00 00 00 ff 00 00
May  5 11:46:51 vtl vtllibrary[25046]: smc_read_element_status(): READ ELEMENT STATUS (14344) **
May  5 11:46:51 vtl vtllibrary[25046]: CDB (14345) (delay 405): b8 04 01 04 00 01 00 00 00 ff 00 00
May  5 11:46:51 vtl vtllibrary[25046]: smc_read_element_status(): READ ELEMENT STATUS (14345) **
May  5 11:46:51 vtl vtllibrary[25046]: CDB (14346) (delay 405): 07 00 00 00 00 00
May  5 11:46:51 vtl vtllibrary[25046]: smc_initialize_element_status(): INITIALIZE ELEMENT (14346) **
May  5 11:46:51 vtl kernel: ch13: dt 0x102: ID/LUN unknown
May  5 11:46:51 vtl kernel: ch13: dt 0x103: ID/LUN unknown
May  5 11:46:51 vtl kernel: ch13: dt 0x104: ID/LUN unknown
May  5 11:46:51 vtl kernel: ch13: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:52 vtl kernel: ch13: ... finished
May  5 11:46:52 vtl kernel: ch 4:12:0:0: Attached scsi changer ch13
May  5 11:46:52 vtl kernel: ch 4:12:0:0: Attached scsi generic sg97 type 8
May  5 11:46:52 vtl vtllibrary[25045]: add_lu(): Child anounces 'lu [12:0:0] created'.
May  5 11:46:52 vtl vtllibrary[25046]: CDB (14348) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:52 vtl vtllibrary[25046]: spc_inquiry(): INQUIRY ** (14348)
May  5 11:46:52 vtl vtllibrary[25046]: CDB (14349) (delay 805): 12 01 00 00 fe 00
May  5 11:46:52 vtl vtllibrary[25046]: spc_inquiry(): INQUIRY ** (14349)
May  5 11:46:52 vtl vtllibrary[25046]: CDB (14350) (delay 805): 12 01 80 00 fe 00
May  5 11:46:52 vtl vtllibrary[25046]: spc_inquiry(): INQUIRY ** (14350)
May  5 11:46:52 vtl vtllibrary[25046]: CDB (14351) (delay 805): 12 01 83 00 fe 00
May  5 11:46:52 vtl vtllibrary[25046]: spc_inquiry(): INQUIRY ** (14351)
May  5 11:46:52 vtl vtllibrary[25046]: CDB (14352) (delay 405): 12 01 80 00 fe 00
May  5 11:46:52 vtl vtllibrary[25046]: spc_inquiry(): INQUIRY ** (14352)
May  5 11:46:52 vtl vtllibrary[25049]: CDB (14347) (delay 108000): 12 00 00 00 24 00
May  5 11:46:52 vtl vtllibrary[25049]: spc_inquiry(): INQUIRY ** (14347)
May  5 11:46:52 vtl vtllibrary[25049]: CDB (14353) (delay 805): 12 00 00 00 40 00
May  5 11:46:52 vtl vtllibrary[25049]: spc_inquiry(): INQUIRY ** (14353)
May  5 11:46:52 vtl kernel: scsi 4:13:0:0: Medium Changer    STK      L700             0016 PQ: 0 ANSI: 5
May  5 11:46:52 vtl vtllibrary[25049]: CDB (14354) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:52 vtl vtllibrary[25049]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:52 vtl vtllibrary[25049]: CDB (14355) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:52 vtl vtllibrary[25049]: spc_mode_sense(): MODE SENSE 6 (14355) **
May  5 11:46:52 vtl vtllibrary[25049]: CDB (14356) (delay 405): b8 04 01 f0 00 01 00 00 00 ff 00 00
May  5 11:46:52 vtl vtllibrary[25049]: smc_read_element_status(): READ ELEMENT STATUS (14356) **
May  5 11:46:52 vtl vtllibrary[25049]: CDB (14357) (delay 405): b8 04 01 f1 00 01 00 00 00 ff 00 00
May  5 11:46:52 vtl vtllibrary[25049]: smc_read_element_status(): READ ELEMENT STATUS (14357) **
May  5 11:46:52 vtl vtllibrary[25049]: CDB (14358) (delay 405): b8 04 01 f2 00 01 00 00 00 ff 00 00
May  5 11:46:52 vtl kernel: ch14: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:52 vtl kernel: ch14: type #2 (st): 0x400+99 [storage]
May  5 11:46:52 vtl kernel: ch14: type #3 (ie): 0x10+4 [import/export]
May  5 11:46:52 vtl kernel: ch14: type #4 (dt): 0x1f0+4 [data transfer]
May  5 11:46:52 vtl kernel: ch14: dt 0x1f0: ID/LUN unknown
May  5 11:46:52 vtl kernel: ch14: dt 0x1f1: ID/LUN unknown
May  5 11:46:52 vtl vtllibrary[25049]: smc_read_element_status(): READ ELEMENT STATUS (14358) **
May  5 11:46:52 vtl kernel: ch14: dt 0x1f2: ID/LUN unknown
May  5 11:46:52 vtl vtllibrary[25049]: CDB (14359) (delay 805): b8 04 01 f3 00 01 00 00 00 ff 00 00
May  5 11:46:52 vtl vtllibrary[25049]: smc_read_element_status(): READ ELEMENT STATUS (14359) **
May  5 11:46:52 vtl kernel: ch14: dt 0x1f3: ID/LUN unknown
May  5 11:46:52 vtl kernel: ch14: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:52 vtl vtllibrary[25049]: CDB (14360) (delay 805): 07 00 00 00 00 00
May  5 11:46:52 vtl vtllibrary[25049]: smc_initialize_element_status(): INITIALIZE ELEMENT (14360) **
May  5 11:46:53 vtl vtllibrary[25048]: add_lu(): Child anounces 'lu [13:0:0] created'.
May  5 11:46:53 vtl kernel: ch14: ... finished
May  5 11:46:53 vtl kernel: ch 4:13:0:0: Attached scsi changer ch14
May  5 11:46:53 vtl kernel: ch 4:13:0:0: Attached scsi generic sg98 type 8
May  5 11:46:53 vtl vtllibrary[25049]: CDB (14362) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:53 vtl vtllibrary[25049]: spc_inquiry(): INQUIRY ** (14362)
May  5 11:46:53 vtl vtllibrary[25049]: CDB (14363) (delay 805): 12 01 00 00 fe 00
May  5 11:46:53 vtl vtllibrary[25049]: spc_inquiry(): INQUIRY ** (14363)
May  5 11:46:53 vtl vtllibrary[25049]: CDB (14364) (delay 805): 12 01 80 00 fe 00
May  5 11:46:53 vtl vtllibrary[25049]: spc_inquiry(): INQUIRY ** (14364)
May  5 11:46:53 vtl vtllibrary[25052]: CDB (14361) (delay 112000): 12 00 00 00 24 00
May  5 11:46:53 vtl vtllibrary[25052]: spc_inquiry(): INQUIRY ** (14361)
May  5 11:46:53 vtl vtllibrary[25052]: CDB (14365) (delay 405): 12 00 00 00 40 00
May  5 11:46:53 vtl vtllibrary[25052]: spc_inquiry(): INQUIRY ** (14365)
May  5 11:46:53 vtl kernel: scsi 4:14:0:0: Medium Changer    ADIC     Scalar 1000      500A PQ: 0 ANSI: 5
May  5 11:46:53 vtl vtllibrary[25052]: CDB (14366) (delay 805): 1a 00 1d 00 ff 00
May  5 11:46:53 vtl vtllibrary[25052]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:53 vtl vtllibrary[25052]: CDB (14367) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:53 vtl vtllibrary[25052]: spc_mode_sense(): MODE SENSE 6 (14367) **
May  5 11:46:53 vtl kernel: ch15: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:53 vtl kernel: ch15: type #2 (st): 0x1000+99 [storage]
May  5 11:46:53 vtl kernel: ch15: type #3 (ie): 0x10+4 [import/export]
May  5 11:46:53 vtl kernel: ch15: type #4 (dt): 0x100+4 [data transfer]
May  5 11:46:53 vtl vtllibrary[25052]: CDB (14368) (delay 805): b8 04 01 00 00 01 00 00 00 ff 00 00
May  5 11:46:53 vtl vtllibrary[25052]: smc_read_element_status(): READ ELEMENT STATUS (14368) **
May  5 11:46:53 vtl kernel: ch15: dt 0x100: ID/LUN unknown
May  5 11:46:53 vtl kernel: ch15: dt 0x101: ID/LUN unknown
May  5 11:46:53 vtl kernel: ch15: dt 0x102: ID/LUN unknown
May  5 11:46:53 vtl vtllibrary[25052]: CDB (14369) (delay 405): b8 04 01 01 00 01 00 00 00 ff 00 00
May  5 11:46:53 vtl vtllibrary[25052]: smc_read_element_status(): READ ELEMENT STATUS (14369) **
May  5 11:46:53 vtl vtllibrary[25052]: CDB (14370) (delay 405): b8 04 01 02 00 01 00 00 00 ff 00 00
May  5 11:46:53 vtl vtllibrary[25052]: smc_read_element_status(): READ ELEMENT STATUS (14370) **
May  5 11:46:53 vtl vtllibrary[25052]: CDB (14371) (delay 405): b8 04 01 03 00 01 00 00 00 ff 00 00
May  5 11:46:53 vtl vtllibrary[25052]: smc_read_element_status(): READ ELEMENT STATUS (14371) **
May  5 11:46:53 vtl kernel: ch15: dt 0x103: ID/LUN unknown
May  5 11:46:53 vtl kernel: ch15: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:53 vtl vtllibrary[25052]: CDB (14372) (delay 805): 07 00 00 00 00 00
May  5 11:46:53 vtl vtllibrary[25052]: smc_initialize_element_status(): INITIALIZE ELEMENT (14372) **
May  5 11:46:54 vtl kernel: ch15: ... finished
May  5 11:46:54 vtl kernel: ch 4:14:0:0: Attached scsi changer ch15
May  5 11:46:54 vtl kernel: ch 4:14:0:0: Attached scsi generic sg99 type 8
May  5 11:46:54 vtl vtllibrary[25051]: add_lu(): Child anounces 'lu [14:0:0] created'.
May  5 11:46:54 vtl vtllibrary[25052]: CDB (14374) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:54 vtl vtllibrary[25052]: spc_inquiry(): INQUIRY ** (14374)
May  5 11:46:54 vtl vtllibrary[25052]: CDB (14375) (delay 805): 12 01 00 00 fe 00
May  5 11:46:54 vtl vtllibrary[25052]: spc_inquiry(): INQUIRY ** (14375)
May  5 11:46:54 vtl vtllibrary[25052]: CDB (14376) (delay 405): 12 01 80 00 fe 00
May  5 11:46:54 vtl vtllibrary[25052]: spc_inquiry(): INQUIRY ** (14376)
May  5 11:46:54 vtl vtllibrary[25052]: CDB (14377) (delay 405): 12 01 83 00 fe 00
May  5 11:46:54 vtl vtllibrary[25052]: spc_inquiry(): INQUIRY ** (14377)
May  5 11:46:54 vtl vtllibrary[25055]: CDB (14373) (delay 115600): 12 00 00 00 24 00
May  5 11:46:54 vtl vtllibrary[25055]: spc_inquiry(): INQUIRY ** (14373)
May  5 11:46:54 vtl kernel: scsi 4:14:2:0: Medium Changer    HP       MSL G3 Series    7.80 PQ: 0 ANSI: 5
May  5 11:46:54 vtl kernel: ch16: type #1 (mt): 0x1+1 [medium transport]
May  5 11:46:54 vtl kernel: ch16: type #2 (st): 0x20+39 [storage]
May  5 11:46:54 vtl kernel: ch16: type #3 (ie): 0x1c0+4 [import/export]
May  5 11:46:54 vtl kernel: ch16: type #4 (dt): 0x1e0+4 [data transfer]
May  5 11:46:54 vtl vtllibrary[25055]: CDB (14378) (delay 405): 12 00 00 00 40 00
May  5 11:46:54 vtl vtllibrary[25055]: spc_inquiry(): INQUIRY ** (14378)
May  5 11:46:54 vtl vtllibrary[25055]: CDB (14379) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:54 vtl vtllibrary[25055]: return_sense(): [Key/ASC/ASCQ] [06 29 00]
May  5 11:46:54 vtl vtllibrary[25055]: CDB (14380) (delay 405): 1a 00 1d 00 ff 00
May  5 11:46:54 vtl vtllibrary[25055]: spc_mode_sense(): MODE SENSE 6 (14380) **
May  5 11:46:54 vtl vtllibrary[25055]: CDB (14381) (delay 405): b8 04 01 e0 00 01 00 00 00 ff 00 00
May  5 11:46:54 vtl vtllibrary[25055]: smc_read_element_status(): READ ELEMENT STATUS (14381) **
May  5 11:46:54 vtl vtllibrary[25055]: CDB (14382) (delay 405): b8 04 01 e1 00 01 00 00 00 ff 00 00
May  5 11:46:54 vtl vtllibrary[25055]: smc_read_element_status(): READ ELEMENT STATUS (14382) **
May  5 11:46:54 vtl vtllibrary[25055]: CDB (14383) (delay 405): b8 04 01 e2 00 01 00 00 00 ff 00 00
May  5 11:46:54 vtl vtllibrary[25055]: smc_read_element_status(): READ ELEMENT STATUS (14383) **
May  5 11:46:54 vtl kernel: ch16: dt 0x1e0: ID/LUN unknown
May  5 11:46:54 vtl kernel: ch16: dt 0x1e1: ID/LUN unknown
May  5 11:46:54 vtl kernel: ch16: dt 0x1e2: ID/LUN unknown
May  5 11:46:54 vtl kernel: ch16: dt 0x1e3: ID/LUN unknown
May  5 11:46:54 vtl kernel: ch16: INITIALIZE ELEMENT STATUS, may take some time ...
May  5 11:46:54 vtl vtllibrary[25055]: CDB (14384) (delay 405): b8 04 01 e3 00 01 00 00 00 ff 00 00
May  5 11:46:54 vtl vtllibrary[25055]: smc_read_element_status(): READ ELEMENT STATUS (14384) **
May  5 11:46:54 vtl vtllibrary[25055]: CDB (14385) (delay 405): 07 00 00 00 00 00
May  5 11:46:54 vtl vtllibrary[25055]: smc_initialize_element_status(): INITIALIZE ELEMENT (14385) **
May  5 11:46:55 vtl kernel: ch16: ... finished
May  5 11:46:55 vtl kernel: ch 4:14:2:0: Attached scsi changer ch16
May  5 11:46:55 vtl kernel: ch 4:14:2:0: Attached scsi generic sg100 type 8
May  5 11:46:55 vtl vtllibrary[25054]: add_lu(): Child anounces 'lu [14:2:0] created'.
May  5 11:46:55 vtl vtllibrary[25055]: CDB (14386) (delay 1205): 12 00 00 00 fe 00
May  5 11:46:55 vtl vtllibrary[25055]: spc_inquiry(): INQUIRY ** (14386)
May  5 11:46:55 vtl vtllibrary[25055]: CDB (14387) (delay 405): 12 01 00 00 fe 00
May  5 11:46:55 vtl vtllibrary[25055]: spc_inquiry(): INQUIRY ** (14387)
May  5 11:46:55 vtl vtllibrary[25055]: CDB (14388) (delay 405): 12 01 80 00 fe 00
May  5 11:46:55 vtl vtllibrary[25055]: spc_inquiry(): INQUIRY ** (14388)
May  5 11:46:55 vtl vtllibrary[25055]: CDB (14389) (delay 405): 12 01 83 00 fe 00
May  5 11:46:55 vtl vtllibrary[25055]: spc_inquiry(): INQUIRY ** (14389)
Reply | Threaded
Open this post in threaded view
|

Re: can't find serial on hp msl g3(tsm 6.3 with hp msl g3)

Mark Harvey
Administrator
In reply to this post by redliquid
Please see recent replies by myself with a patch to fix this bug. While you haven't specified the version, I'm assuming its 1.5-0

Sent from my iPhone

On 5 May 2014, at 13:45, "redliquid [via mhVTL - A Linux Virtual Tape Library]" <[hidden email]> wrote:

my config :
mhvtl:
Library: 100 CHANNEL: 14 TARGET: 02 LUN: 00
 Vendor identification: HP
 Product identification: MSL G3 Series
 Product revision level: 7.80
 Unit serial number: 31001030
 NAA: 28:11:22:33:ab:1:00:00
 Home directory: /opt/mhvtl/100
 Backoff: 400

Drive: 101 CHANNEL: 14 TARGET: 02 LUN: 01
 Library ID: 100 Slot: 01
 Vendor identification: HP
 Product identification: Ultrium 5-SCSI
 Product revision level: Y34W
 Unit serial number: HU1008GA29
 NAA: 28:11:22:33:ab:1:00:01
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 102 CHANNEL: 14 TARGET: 02 LUN: 2
 Library ID: 100 Slot: 2
 Vendor identification: HP
 Product identification: Ultrium 5-SCSI
 Product revision level: Y5BW
 Unit serial number: HU1007H7R6
 NAA: 28:11:22:33:ab:1:00:2
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 103 CHANNEL: 14 TARGET: 02 LUN: 03
 Library ID: 100 Slot: 03
 Vendor identification: HP
 Product identification: Ultrium 5-SCSI
 Product revision level: Y34W
 Unit serial number: HU1008GA30
 NAA: 28:11:22:33:ab:1:00:03
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 104 CHANNEL: 14 TARGET: 02 LUN: 4
 Library ID: 100 Slot: 04
 Vendor identification: HP
 Product identification: Ultrium 5-SCSI
 Product revision level: Y5BW
 Unit serial number: HU1007H7R8
 NAA: 28:11:22:33:ab:1:00:4
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

[4:14:2:0]   mediumx HP       MSL G3 Series    7.80  /dev/sch16  /dev/sg100
[4:14:2:1]   tape    HP       Ultrium 5-SCSI   Y34W  /dev/st74  /dev/sg80
[4:14:2:2]   tape    HP       Ultrium 5-SCSI   Y5BW  /dev/st75  /dev/sg81
[4:14:2:3]   tape    HP       Ultrium 5-SCSI   Y34W  /dev/st76  /dev/sg82
[4:14:2:4]   tape    HP       Ultrium 5-SCSI   Y5BW  /dev/st77  /dev/sg83

tgtadm --lld iscsi --mode target --op new --tid=1 -T mslg3
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 --bstype=sg --device-type=pt -b /dev/sg100
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 2 --bstype=sg --device-type=pt -b /dev/sg80  
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 3 --bstype=sg --device-type=pt -b /dev/sg81  
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 4 --bstype=sg --device-type=pt -b /dev/sg82  
tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 5 --bstype=sg --device-type=pt -b /dev/sg83    
tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL


TSM:
# pwd
/opt/tivoli/tsm/devices/bin
# ./autoconf -a
******************************************
*       IBM TIVOLI STORAGE MANAGER       *
*   Autoconf Utility Program for Linux   *
******************************************
Licensed Materials - Property of IBM

(C) Copyright IBM Corporation 2009. All rights reserved.
U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corporation.

Added the read and write permissions for all users to /dev/sg4.
Added the read and write permissions for all users to /dev/sg5.
Added the read and write permissions for all users to /dev/sg6.
Added the read and write permissions for all users to /dev/sg7.
Added the read and write permissions for all users to /dev/sg8.

Tivoli Tape Drives:
===================
Index Minor Host CHN ID  LUN Type Vendor_ID Device_Serial_Number       Product_ID       Rev.
000   005   006  000 000 002 001  HP        HU1008GA29           Ultrium 5-SCSI   Y34W
001   006   006  000 000 003 001  HP        HU1007H7R6           Ultrium 5-SCSI   Y5BW
002   007   006  000 000 004 001  HP        HU1008GA30           Ultrium 5-SCSI   Y34W
003   008   006  000 000 005 001  HP        HU1007H7R8           Ultrium 5-SCSI   Y5BW


Tivoli Medium Changer Devices:
==============================
Index Minor Host CHN ID  LUN Type Vendor_ID Device_Serial_Number       Product_ID       Rev.
000   004   006  000 000 001 008  HP       € MSL G3 Series    7.80

# lsscsi -g
[0:0:0:0]    cd/dvd  NECVMWar VMware IDE CDR00 1.00  /dev/sr0   /dev/sg0
[1:0:0:0]    cd/dvd  NECVMWar VMware IDE CDR10 1.00  /dev/sr1   /dev/sg1
[2:0:0:0]    disk    VMware,  VMware Virtual S 1.0   /dev/sda   /dev/sg2
[6:0:0:0]    storage IET      Controller       0001  -         /dev/sg3
[6:0:0:1]    mediumx HP       MSL G3 Series    7.80  /dev/sch0  /dev/sg4
[6:0:0:2]    tape    HP       Ultrium 5-SCSI   Y34W  -          /dev/sg5
[6:0:0:3]    tape    HP       Ultrium 5-SCSI   Y5BW  -          /dev/sg6
[6:0:0:4]    tape    HP       Ultrium 5-SCSI   Y34W  -          /dev/sg7
[6:0:0:5]    tape    HP       Ultrium 5-SCSI   Y5BW  -          /dev/sg8

TSM Define:
set servername tsmserver
define library hp-msl libtype=scsi shared=yes
define path tsmserver hp-msl srctype=server desttype=library device=/dev/tsmscsi/lb0
DEFINE DRIVE hp-msl dr1 ELEMENT=autod serial=autod ONLINE=Yes
DEFINE DRIVE hp-msl dr2 ELEMENT=autod serial=autod ONLINE=Yes
DEFINE DRIVE hp-msl dr3 ELEMENT=autod serial=autod ONLINE=Yes
DEFINE DRIVE hp-msl dr4 ELEMENT=autod serial=autod ONLINE=Yes
define path tsmserver dr1 srctype=server desttype=drive library=hp-msl device=/dev/tsmscsi/mt0
define path tsmserver dr2 srctype=server desttype=drive library=hp-msl device=/dev/tsmscsi/mt1
define path tsmserver dr3 srctype=server desttype=drive library=hp-msl device=/dev/tsmscsi/mt2
define path tsmserver dr4 srctype=server desttype=drive library=hp-msl device=/dev/tsmscsi/mt3
DEFINE DEVCLASS hp-msl DEVT=LTO FORMAT=DRIVE MOUNTL=DRIVES MOUNTWAIT=60 MOUNTRETENTION=60 PREFIX=ADSM LIBRARY=hp-msl WORM=NO
label libvolume hp-msl search=yes labelsource=barcode checkin=scratch
set dbrecover hp-msl

TSM library infor:
tsm: TSMSERVER>q libr f=d

                  Library Name: HP-MSL
                  Library Type: SCSI
                        ACS Id:
              Private Category:
              Scratch Category:
         WORM Scratch Category:
              External Manager:
                        Shared: Yes
                       LanFree:
            ObeyMountRetention:
       Primary Library Manager:
                           WWN: 50112233AB010000
                 Serial Number:€
                     AutoLabel: No
                  Reset Drives: Yes
               Relabel Scratch: No
                      ZosMedia:
Last Update by (administrator): ADMIN
         Last Update Date/Time: 05/05/2014 11:38:54

my question:
1.why serial of library is " Serial Number:€"
2.i think that my library wwn is  NAA: 28:11:22:33:ab:1:00:00, but why is WWN: 50112233AB010000
   i have a library that it's wwn is 50112233AB010000
Library: 50 CHANNEL: 1 TARGET: 00 LUN: 00
 Vendor identification: IBM
 Product identification: 03584L22
 Product revision level: 4.02
 Unit serial number: 71800050
 NAA: 50:11:22:33:ab:1:00:00
 Home directory: /opt/mhvtl/50
 Backoff: 400

Drive: 51 CHANNEL: 1 TARGET: 00 LUN: 01
 Library ID: 50 Slot: 01
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800051
 NAA: 50:11:22:33:ab:1:00:01
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 52 CHANNEL: 1 TARGET: 00 LUN: 2
 Library ID: 50 Slot: 2
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800052
 NAA: 50:11:22:33:ab:1:00:2
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 53 CHANNEL: 1 TARGET: 00 LUN: 3
 Library ID: 50 Slot: 3
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800053
 NAA: 50:11:22:33:ab:1:00:3
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 54 CHANNEL: 1 TARGET: 00 LUN: 4
 Library ID: 50 Slot: 4
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800054
 NAA: 50:11:22:33:ab:1:00:4
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

Drive: 55 CHANNEL: 1 TARGET: 00 LUN: 5
 Library ID: 50 Slot: 5
 Vendor identification: IBM
 Product identification: ULT3580-TD3
 Product revision level: 252D
 Unit serial number: 71800055
 NAA: 50:11:22:33:ab:1:00:5
 Compression: factor 1 enabled 1
 Compression type: lzo
 Backoff: 400

thanks.



To start a new topic under mhVTL - A Linux Virtual Tape Library, email [hidden email]
To unsubscribe from mhVTL - A Linux Virtual Tape Library, click here.
NAML
Regards from Australia
Mark Harvey
Reply | Threaded
Open this post in threaded view
|

Re: can't find serial on hp msl g3(tsm 6.3 with hp msl g3)

redliquid
Reply | Threaded
Open this post in threaded view
|

Re: can't find serial on hp msl g3(tsm 6.3 with hp msl g3)

redliquid
In reply to this post by Mark Harvey
how can fix this problem
download 0001-Correct-VPD-updates-for-library-personality-modules.patch
put it to mhvtl server
chmod u+x 0001-Correct-VPD-updates-for-library-personality-modules.patch
execute 0001-Correct-VPD-updates-for-library-personality-modules.patch
./0001-Correct-VPD-updates-for-library-personality-modules.patch
is that right?
Reply | Threaded
Open this post in threaded view
|

Re: can't find serial on hp msl g3(tsm 6.3 with hp msl g3)

Mark Harvey
Administrator
No, you need to start with the source code.

$ tar xvfz /where/every/code/lives/mhvtl-2014-04-13.tgz
$ cd mhvtl-1.5
$ patch -p1 < /path/to/0001-Correct-VPD-updates-for-library-personality-modules.patch
$ make
$ sudo make install

Hope the instructions help..
Regards from Australia
Mark Harvey
Reply | Threaded
Open this post in threaded view
|

Re: can't find serial on hp msl g3(tsm 6.3 with hp msl g3)

redliquid
thanks!